From: Stefan Roese sr@denx.de
This type tells u-boot to preserve the COMPHY settings as is it is usefull in situations where the COMPHY was initialized by earlier firmware. Note that IGNORE is different from UNCONNECTED since setting UNCONNECTED type will disconnect the COMPHY in the COMPHY MUX which is a desired behaviour
Signed-off-by: Yehuda Yitschak yehuday@marvell.com Signed-off-by: Stefan Roese sr@denx.de Signed-off-by: Igal Liberman igall@marvell.com --- drivers/phy/marvell/comphy_core.c | 2 +- drivers/phy/marvell/comphy_cp110.c | 1 + drivers/phy/marvell/comphy_mux.c | 7 +++++++ include/dt-bindings/comphy/comphy_data.h | 3 ++- 4 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/marvell/comphy_core.c b/drivers/phy/marvell/comphy_core.c index db23bef..23e8c4b 100644 --- a/drivers/phy/marvell/comphy_core.c +++ b/drivers/phy/marvell/comphy_core.c @@ -37,7 +37,7 @@ static char *get_type_string(u32 type) "SGMII1", "SGMII2", "SGMII3", "QSGMII", "USB3_HOST0", "USB3_HOST1", "USB3_DEVICE", "XAUI0", "XAUI1", "XAUI2", "XAUI3", - "RXAUI0", "RXAUI1", "SFI"}; + "RXAUI0", "RXAUI1", "SFI", "IGNORE"};
if (type < 0 || type > PHY_TYPE_MAX) return "invalid"; diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c index 8bec0ab..499aa68 100644 --- a/drivers/phy/marvell/comphy_cp110.c +++ b/drivers/phy/marvell/comphy_cp110.c @@ -1663,6 +1663,7 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg, } switch (ptr_comphy_map->type) { case PHY_TYPE_UNCONNECTED: + case PHY_TYPE_IGNORE: continue; break; case PHY_TYPE_PEX0: diff --git a/drivers/phy/marvell/comphy_mux.c b/drivers/phy/marvell/comphy_mux.c index 1dc7426..b036fb1 100644 --- a/drivers/phy/marvell/comphy_mux.c +++ b/drivers/phy/marvell/comphy_mux.c @@ -27,6 +27,10 @@ static void comphy_mux_check_config(struct comphy_mux_data *mux_data,
for (lane = 0; lane < comphy_max_lanes; lane++, comphy_map_data++, mux_data++) { + /* Don't check ignored COMPHYs */ + if (comphy_map_data->type == PHY_TYPE_IGNORE) + continue; + mux_opt = mux_data->mux_values; for (opt = 0, valid = 0; opt < mux_data->max_lane_values; opt++, mux_opt++) { @@ -83,6 +87,9 @@ static void comphy_mux_reg_write(struct comphy_mux_data *mux_data,
for (lane = 0; lane < comphy_max_lanes; lane++, comphy_map_data++, mux_data++) { + if (comphy_map_data->type == PHY_TYPE_IGNORE) + continue; + offset = lane * bitcount; mask = (((1 << bitcount) - 1) << offset); value = (comphy_mux_get_mux_value(mux_data, diff --git a/include/dt-bindings/comphy/comphy_data.h b/include/dt-bindings/comphy/comphy_data.h index d127388..5eb32ef 100644 --- a/include/dt-bindings/comphy/comphy_data.h +++ b/include/dt-bindings/comphy/comphy_data.h @@ -43,7 +43,8 @@ #define PHY_TYPE_RXAUI0 21 #define PHY_TYPE_RXAUI1 22 #define PHY_TYPE_SFI 23 -#define PHY_TYPE_MAX 24 +#define PHY_TYPE_IGNORE 24 +#define PHY_TYPE_MAX 25 #define PHY_TYPE_INVALID 0xff
#define PHY_POLARITY_NO_INVERT 0