Hi Lokesh,
On 03/06/21 10:54 am, Lokesh Vutla wrote:
On 01/06/21 8:43 pm, Aswath Govindraju wrote:
Add support for providing ATF load address with a Kconfig symbol.
Signed-off-by: Aswath Govindraju a-govindraju@ti.com
arch/arm/mach-k3/Kconfig | 7 +++++++ arch/arm/mach-k3/config.mk | 1 + tools/k3_fit_atf.sh | 9 ++++++--- 3 files changed, 14 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig index bfbce44bfa59..2c46d7a3a798 100644 --- a/arch/arm/mach-k3/Kconfig +++ b/arch/arm/mach-k3/Kconfig @@ -147,6 +147,13 @@ config SYS_K3_SPL_ATF Enabling this will try to start Cortex-A (typically with ATF) after SPL from R5.
+config K3_ATF_LOAD_ADDR
- hex "Load address of ATF image"
- default 0x7000000
shouldn't this be 0x70000000 ?
Sorry , it should be 0x70000000. Will correct this in respin.
Thanks, Aswath
Thanks and regards, Lokesh