12 Jan
2011
12 Jan
'11
9:05 a.m.
On 01/11/2011 08:48 PM, Ben Gardiner wrote:
There are two separate issues causing failure of ea20 builds.
I discovered them while trying to build a da850evm load with RMII support. The second patch affects all boards that could use CONFIG_DRIVER_TI_EMAC_USE_RMII of which ea20 is the only one set default in u-boot. The first patch fixes the second problem I ran into trying to build ea20 after developping the RMII patch.
Ben Gardiner (2): ea20: fix libea20.o not found ea20: fix undefined PHY_* errors
board/davinci/ea20/Makefile | 2 +- drivers/net/davinci_emac.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-)
Hi Ben,
thanks for discovering this issue and to fix it !
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de
=====================================================================