Hi Jagan,
On Wed, May 20, 2020 at 3:24 AM Jagan Teki jagan@amarulasolutions.com wrote:
This series support Boot from SPI on SiFive FU540 HiFive Unleashed board, with improved version of detecting bootmode at runtime.
Previous version changes are at [1].
Changes for v2:
- fu540 board driver
- runtime bootmode detection
- rebase on Pragnesh v11 series
[1] https://patchwork.ozlabs.org/project/uboot/cover/20200420140514.25847-1-jaga...
Any inputs?
It looks this series does not build?
$ make sifive_fu540_defconfig $ make -j32 scripts/kconfig/conf --syncconfig Kconfig .config:36:warning: symbol value '' invalid for ENV_OFFSET .config:37:warning: symbol value '' invalid for ENV_SECT_SIZE * * Restart config... * * * Environment * Environment is not stored (ENV_IS_NOWHERE) [N/y/?] n Environment in EEPROM (ENV_IS_IN_EEPROM) [N/y/?] n Environment is in a FAT filesystem (ENV_IS_IN_FAT) [N/y/?] n Environment is in a EXT4 filesystem (ENV_IS_IN_EXT4) [N/y/?] n Environment in flash memory (ENV_IS_IN_FLASH) [N/y/?] n Environment in an MMC device (ENV_IS_IN_MMC) [N/y/?] n Environment in a NAND device (ENV_IS_IN_NAND) [N/y/?] n Environment in a non-volatile RAM (ENV_IS_IN_NVRAM) [N/y/?] n Environment is in OneNAND (ENV_IS_IN_ONENAND) [N/y/?] n Environment is in remote memory space (ENV_IS_IN_REMOTE) [N/y/?] n Environment is in SPI flash (ENV_IS_IN_SPI_FLASH) [Y/?] y SPI flash bus for environment (USE_ENV_SPI_BUS) [N/y/?] n SPI flash chip select for environment (USE_ENV_SPI_CS) [N/y/?] n SPI flash max frequency for environment (USE_ENV_SPI_MAX_HZ) [N/y/?] n SPI flash mode for environment (USE_ENV_SPI_MODE) [N/y/?] n Enable redundant environment support (SYS_REDUNDAND_ENVIRONMENT) [N/y/?] n Environment address (ENV_ADDR) [0x0] 0x0 Environment offset (ENV_OFFSET) [] (NEW) ^Cscripts/kconfig/Makefile:75: recipe for target 'syncconfig' failed make[2]: *** [syncconfig] Interrupt Makefile:565: recipe for target 'syncconfig' failed make[1]: *** [syncconfig] Interrupt
Regards, Bin