From: Aswath Govindraju a-govindraju@ti.com
The size of J7200 tiboot3.bin is 516KB but the memory reserved for it in HyperFlash was 512KB. This led to overlap of tiboot3.bin over tispl.bin region and break in HyperFlash boot mode.
Therefore, fix this by increasing the memory allocated for tiboot3.bin to 1MB for J7200.
Fixes: cf1d6867f774 ("board: ti: j7200: Introduce support for j7200 build targets")
Signed-off-by: Aswath Govindraju a-govindraju@ti.com Signed-off-by: Vaishnav Achath vaishnav.a@ti.com Signed-off-by: Anurag Dutta a-dutta@ti.com --- include/configs/j721e_evm.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h index bdf12ee8f7..8512062952 100644 --- a/include/configs/j721e_evm.h +++ b/include/configs/j721e_evm.h @@ -15,11 +15,14 @@ #define CFG_SYS_FLASH_BASE 0x000000000
/* SPL Loader Configuration */ -#if defined(CONFIG_TARGET_J721E_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM) +#if defined(CONFIG_TARGET_J721E_A72_EVM) #define CFG_SYS_UBOOT_BASE 0x50280000 -/* Image load address in RAM for DFU boot*/ -#else +#elif defined(CONFIG_TARGET_J7200_A72_EVM) +#define CFG_SYS_UBOOT_BASE 0x50300000 +#elif defined(CONFIG_TARGET_J721E_R5_EVM) #define CFG_SYS_UBOOT_BASE 0x50080000 +#else +#define CFG_SYS_UBOOT_BASE 0x50100000 #endif
/**