Mike Wellington wrote:
My kernel command line is set as follows in include/configs/ml300.h
#define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/nfs rw \ nfsroot=135.4.21.60:/opt2/timesys/linux/4.0/amxap100/rfs \ rootpath=/opt2/timesys/linux/4.0/amxap100/rfs \ ip=135.4.21.155:135.4.21.60:135.4.21.254:255.255.254.0:prolab6::off"
However when the kernel outputs its command line during the boot process I see:
"Kernel command line: console=ttyS0,9600 root=/dev/nfs rw nfsroot=135.4.21.60:/opt2/timesys/linux/4.0/amxap100/rfs rootpath=/opt2/timesys/linux/4.0/amxap100/rfs ip=135.4.21.155:135.4.21.60:135.4.21.254:255.255.254.0:prolab6::off"
Then, later I see:
"IP-Config: Complete: device=eth0, addr=135.4.21.155, mask=255.255.254.0, gw=135.4.21.254, host=prolab6, domain=, nis-domain=(none) bootserver=135.4.21.60 rootserver=135.4.21.60 rootpath="
Note that rootpath is now empty, even though I set it on the command line.
Can somebody give me a clue?
my config
IP-Config: Complete: device=eth0, addr=10.10.10.2, mask=255.255.255.0, gw=10.10.10.1, host=xcep, domain=, nis-domain=(none), bootserver=10.10.10.1, rootserver=10.10.10.1, rootpath=
my rootpath is also empty but i have 'xcep' dir that matches my target name under /tftpboot like: /tftpboot/xcep/<root fs>
I previously had different dir on tftp server but using this config saved some issues with booting linux...
IMHO, if your fs does not get mounted this is not the issue.
rgds,himba