13 Nov
2012
13 Nov
'12
11:50 a.m.
Dear Easwar,
In message CANOwP4VriySb1xcf_Eyqt=vMZhO6v0vQc4Wxv7YkO2dzxbxvmg@mail.gmail.com you wrote:
Im using a board similar to MPC8306SOM, We are using the same DDR, NOR,
Similar is not good enough. If there are _any_ differences, you must adapt U-Boot to these = port U-Boot to your hardware. There is no way around that.
OK, you can close your eyes, pray to <indert your favorite deity here> and/or sacrifice a chicken - this may work, but more likely it doesn't. Or it appears to work, to fallon your feet all the harder a few steps further down the road.
When we google it, we saw many others facing the same issue as we are facing. Kindly guide us in what needs to be done.
You need to port U-Boot to your hardware.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
: I've tried (in vi) "g/[a-z]\n[a-z]/s//_/"...but that doesn't
: cut it. Any ideas? (I take it that it may be a two-pass sort of solution).
In the first pass, install perl. :-) Larry Wall 6849@jpl-devvax.JPL.NASA.GOV