Signed-off-by: Jean-Jacques Hiblot jjhiblot@ti.com
---
Changes in v8: - Fix edison build
Changes in v7: None Changes in v6: - Supports DM USB for peripherals - Removed DTS changes that disabled USB1 on DRA7 because DM_USB_DEV is now supported
Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None
board/ti/am57xx/board.c | 86 ------------------------------------------------- 1 file changed, 86 deletions(-)
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c index ffe2a54..8dfb2ee 100644 --- a/board/ti/am57xx/board.c +++ b/board/ti/am57xx/board.c @@ -883,92 +883,6 @@ int spl_start_uboot(void) } #endif
-#if defined(CONFIG_USB_DWC3) && \ - !(defined(CONFIG_DM_USB) && defined(CONFIG_DM_USB_DEV)) -static struct dwc3_device usb_otg_ss2 = { - .maximum_speed = USB_SPEED_HIGH, - .base = DRA7_USB_OTG_SS2_BASE, - .tx_fifo_resize = false, - .index = 1, -}; - -static struct dwc3_omap_device usb_otg_ss2_glue = { - .base = (void *)DRA7_USB_OTG_SS2_GLUE_BASE, - .utmi_mode = DWC3_OMAP_UTMI_MODE_SW, - .index = 1, -}; - -static struct ti_usb_phy_device usb_phy2_device = { - .usb2_phy_power = (void *)DRA7_USB2_PHY2_POWER, - .index = 1, -}; - -int usb_gadget_handle_interrupts(int index) -{ - u32 status; - - status = dwc3_omap_uboot_interrupt_status(index); - if (status) - dwc3_uboot_handle_interrupt(index); - - return 0; -} - -int board_usb_init(int index, enum usb_init_type init) -{ - enable_usb_clocks(index); - switch (index) { - case 0: - if (init == USB_INIT_DEVICE) { - printf("port %d can't be used as device\n", index); - disable_usb_clocks(index); - return -EINVAL; - } - break; - case 1: - if (init == USB_INIT_DEVICE) { -#ifdef CONFIG_USB_DWC3 - usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL; - usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID; - ti_usb_phy_uboot_init(&usb_phy2_device); - dwc3_omap_uboot_init(&usb_otg_ss2_glue); - dwc3_uboot_init(&usb_otg_ss2); -#endif - } else { - printf("port %d can't be used as host\n", index); - disable_usb_clocks(index); - return -EINVAL; - } - - break; - default: - printf("Invalid Controller Index\n"); - } - - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ -#ifdef CONFIG_USB_DWC3 - switch (index) { - case 0: - case 1: - if (init == USB_INIT_DEVICE) { - ti_usb_phy_uboot_exit(index); - dwc3_uboot_exit(index); - dwc3_omap_uboot_exit(index); - } - break; - default: - printf("Invalid Controller Index\n"); - } -#endif - disable_usb_clocks(index); - return 0; -} -#endif /* defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) */ - #ifdef CONFIG_DRIVER_TI_CPSW
/* Delay value to add to calibrated value */