Hi Lukasz,
On Sat, 23 Oct 2021 at 09:04, Lukasz Majewski lukma@denx.de wrote:
This change provides the possibility to build XEA (imx287 based) board U-Boot as a single binary (without support for CONFIG_SPL_FRAMEWORK).
The generated u-boot.sb can be used in the factory environment to for example perform initial setup or HW testing.
It can be used with 'uuu' utility (SDPS: boot -f /srv/tftp/xea/u-boot.sb)
In the configs/imx28_xea_defconfig one needs to disable following configs:
Something is missing here.
The board_init_ll() is used in arch/arm/cpu/arm926ejs/mxs/start.S, which is utilized when CONFIG_SPL_FRAMEWORK is disabled.
However, when it is enabled the arch/arm/cpu/arm926ejs/start.S is used, which requires the lowlevel_init() function.
Signed-off-by: Lukasz Majewski lukma@denx.de
board/liebherr/xea/spl_xea.c | 7 +++++++ board/liebherr/xea/xea.c | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-)
Could you add a Kconifig to control this feature and add something to the board docs?
Regards, Simon