Hi Albert,
please pull these three patches to your arm custodian tree. All of them are related to xilinx zynq. Also after my discussion with Wolfgang Denk I have enabled DCC for zynq because we are using it in one configuration and this driver is not compiled by any platform.
Thanks, Michal
The following changes since commit d62ef5619c9249772247d6af3b8e65207ae0c871: Jagannadha Sutradharudu Teki (1): sf: stmicro: Add support for N25Q256A
are available in the git repository at:
git://www.denx.de/git/u-boot-microblaze.git mainline/arm
Michal Simek (3): xilinx: zynq: Enable DCC and create new zynq_dcc board arm: zynq: Add SLCR support with system reset arm: zynq: Add lowlevel initialization to C
arch/arm/cpu/armv7/zynq/Makefile | 1 + arch/arm/cpu/armv7/zynq/cpu.c | 28 +++++++++- arch/arm/cpu/armv7/zynq/slcr.c | 63 ++++++++++++++++++++ arch/arm/include/asm/arch-zynq/hardware.h | 85 ++++++++++++++++++++++++++++ arch/arm/include/asm/arch-zynq/sys_proto.h | 30 ++++++++++ boards.cfg | 1 + include/configs/zynq.h | 5 ++ 7 files changed, 212 insertions(+), 1 deletions(-) create mode 100644 arch/arm/cpu/armv7/zynq/slcr.c create mode 100644 arch/arm/include/asm/arch-zynq/hardware.h create mode 100644 arch/arm/include/asm/arch-zynq/sys_proto.h