Hi Albert,
please pull from u-boot-imx (last fixes), thanks.
The following changes since commit 3a9d879f6f64585b819af728b53be0a05037fe0d:
Prepare v2013.01 (2013-01-15 14:47:42 -0700)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to 81ca840976e8e418ae8decaf03ea01f59b1b5be2:
mx23evk: Add initial board support (2013-01-28 11:51:04 +0100)
---------------------------------------------------------------- Fabio Estevam (4): woodburn: Set Write Protection GPIO as input mx6qsabre_common: Let mmc partition be board specific tools: imximage: Let .name field be more generic mxs: Use __weak annotation to simplify code
Knut Wohlrab (1): mx6qsabreauto: enable USB host interface
Marek Vasut (14): mxs: mmc: Drop unused members from struct mxsmmc_priv mxs: ssp: Pull out the SSP bus to regs conversion mx23: Add POWER and CLKCTRL register definitions mx23: ssp: Fix ssp-regs.h for MX23 mmc: Limit the number of used SSP ports on MX23 mxs: Add function to ungate the power block on MX23 mxs: Linux uses ttyAMA0 as DUART mxs: Add MX23 olinuxino board support mxs: Boost the memory power supply mxs: dma: Fix APBH DMA driver for MX23 mxs: ssp: Add SSP registers map for MX23 mxs: mmc: Allow overriding default card detect implementation mxs: mmc: Fix the MMC driver for MX23 mxs: mmc: mx23_olinuxino: Add MMC support
Otavio Salvador (14): mxs: clock: Use 'mxs' prefix for methods mx23: Add register base addresses mx23: Add iomux-mx23.h mx23: Add support on print_cpuinfo() mx23: Add boot mode description mx23: SPL: Add boot mode support mx23: SPL: Initialize DDR at 133MHz mx23: config: Enable building of u-boot.sb binary mx23: config: Enable mxsboot tool for i.MX23 based boards mxs: Fix the memory init for MX23 mxs: Add MX23 quirks into the clock code mxs: mmc: Fix MMC reset on iMX23 mx23_olinuxino: Add default environment mx23evk: Add initial board support
Troy Kisky (10): imximage.cfg: run files through C preprocessor doc/README.fec_mxc: add documentation net: fec_mxc: delete CONFIG_FEC_MXC_MULTI net: fec_mxc: change fec_mii_setspeed parameter net: fec_mxc: have fecmxc_initialize call fecmxc_initialize_multi phy: add phy_find_by_mask/phy_connect_dev net: fec_mxc: use fec_set_dev_name to set name net: fec_mxc: only call phy_connect in fec_probe net: fec_mxc: get phydev before fec_probe mx6qsabrelite: search mii phy address 4-7
.gitignore | 1 + MAINTAINERS | 5 + Makefile | 9 +- arch/arm/cpu/arm926ejs/config.mk | 2 +- arch/arm/cpu/arm926ejs/mxs/clock.c | 83 +++-- arch/arm/cpu/arm926ejs/mxs/mxs.c | 25 +- arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 25 ++ arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 118 +++++-- arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 12 + arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd | 18 ++ arch/arm/cpu/armv7/config.mk | 2 +- arch/arm/imx-common/Makefile | 13 + arch/arm/include/asm/arch-mxs/clock.h | 14 +- arch/arm/include/asm/arch-mxs/imx-regs.h | 7 +- arch/arm/include/asm/arch-mxs/iomux-mx23.h | 355 ++++++++++++++++++++ arch/arm/include/asm/arch-mxs/regs-apbh.h | 121 +++++++ arch/arm/include/asm/arch-mxs/regs-base.h | 56 +++- arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h | 221 +++++++++++++ arch/arm/include/asm/arch-mxs/regs-digctl.h | 1 + arch/arm/include/asm/arch-mxs/regs-power-mx23.h | 358 +++++++++++++++++++++ arch/arm/include/asm/arch-mxs/regs-ssp.h | 54 ++++ arch/arm/include/asm/arch-mxs/sys_proto.h | 20 +- board/bluegiga/apx4devkit/apx4devkit.c | 8 +- board/denx/m28evk/m28evk.c | 10 +- board/esg/ima3-mx53/imximage.cfg | 120 +++---- board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 90 +++--- board/freescale/mx23evk/Makefile | 47 +++ board/freescale/mx23evk/mx23evk.c | 83 +++++ board/freescale/mx23evk/spl_boot.c | 104 ++++++ board/freescale/mx25pdk/imximage.cfg | 77 ++--- board/freescale/mx28evk/mx28evk.c | 10 +- board/freescale/mx51evk/imximage.cfg | 114 +++---- board/freescale/mx53ard/imximage_dd3.cfg | 83 ++--- board/freescale/mx53evk/imximage.cfg | 86 ++--- board/freescale/mx53loco/imximage.cfg | 83 ++--- board/freescale/mx53smd/imximage.cfg | 83 ++--- board/freescale/mx6qarm2/imximage.cfg | 88 ++--- board/freescale/mx6qsabreauto/imximage.cfg | 82 ++--- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 24 +- board/genesi/mx51_efikamx/imximage_mx.cfg | 132 ++++---- board/genesi/mx51_efikamx/imximage_sb.cfg | 126 ++++---- board/olimex/mx23_olinuxino/Makefile | 47 +++ board/olimex/mx23_olinuxino/mx23_olinuxino.c | 71 ++++ board/olimex/mx23_olinuxino/spl_boot.c | 99 ++++++ board/schulercontrol/sc_sps_1/sc_sps_1.c | 10 +- board/ttcontrol/vision2/imximage_hynix.cfg | 295 +++++++++-------- board/woodburn/imximage.cfg | 2 +- board/woodburn/woodburn.c | 3 +- boards.cfg | 2 + doc/README.fec_mxc | 27 ++ drivers/dma/apbh_dma.c | 10 +- drivers/mmc/mxsmmc.c | 102 +++--- drivers/net/fec_mxc.c | 164 +++++----- drivers/net/fec_mxc.h | 2 +- drivers/net/phy/phy.c | 128 +++++--- drivers/spi/mxs_spi.c | 7 +- include/configs/m28evk.h | 3 +- include/configs/mx23_olinuxino.h | 210 ++++++++++++ include/configs/mx23evk.h | 202 ++++++++++++ include/configs/mx28evk.h | 1 - include/configs/mx6qsabre_common.h | 2 +- include/configs/mx6qsabreauto.h | 12 + include/configs/sc_sps_1.h | 1 - include/netdev.h | 7 + include/phy.h | 3 + spl/Makefile | 7 +- tools/Makefile | 2 + tools/imximage.c | 2 +- 68 files changed, 3418 insertions(+), 973 deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd create mode 100644 arch/arm/include/asm/arch-mxs/iomux-mx23.h create mode 100644 arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h create mode 100644 arch/arm/include/asm/arch-mxs/regs-power-mx23.h create mode 100644 board/freescale/mx23evk/Makefile create mode 100644 board/freescale/mx23evk/mx23evk.c create mode 100644 board/freescale/mx23evk/spl_boot.c create mode 100644 board/olimex/mx23_olinuxino/Makefile create mode 100644 board/olimex/mx23_olinuxino/mx23_olinuxino.c create mode 100644 board/olimex/mx23_olinuxino/spl_boot.c create mode 100644 doc/README.fec_mxc create mode 100644 include/configs/mx23_olinuxino.h create mode 100644 include/configs/mx23evk.h