Re: [PATCH] xilinx: zynqmp: Update descriptions for u-boot.its

po 23. 8. 2021 v 8:43 odesílatel Michal Simek michal.simek@xilinx.com napsal:

Use TF-A instead of ATF in description. And update generic description with removing ATF because also configurations without it are supported.

Signed-off-by: Michal Simek michal.simek@xilinx.com

arch/arm/mach-zynqmp/mkimage_fit_atf.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh b/arch/arm/mach-zynqmp/mkimage_fit_atf.sh index feb3a6260a34..72a8a3eb7714 100755 --- a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh +++ b/arch/arm/mach-zynqmp/mkimage_fit_atf.sh @@ -57,7 +57,7 @@ cat << __HEADER_EOF /dts-v1/;

/ {

•   description = "Configuration to load ATF before U-Boot";
  

•   description = "Configuration for Xilinx ZynqMP SoC";
  
    images {
            uboot {
  

@@ -78,7 +78,7 @@ __HEADER_EOF if [ -f $BL31 ]; then cat << __ATF atf {

•                   description = "ARM Trusted Firmware";
  

•                   description = "Trusted Firmware-A";
                    data = /incbin/("$BL31");
                    type = "firmware";
                    os = "arm-trusted-firmware";
  

-- 2.33.0

Applied. M