Greetings!
We have an atmel at91rm9200 qi-002 board from a vendor having vendor's monitor image, ramdisk image, and kernel image 2.4.19-rmk7 in flash.
I tried to use u-boot 1.1.1 with the configuration of at91rm2900dk_config:
$cd u-boot-1.1.1 $make CROSS_COMPILE=arm-linux- at91rm2900dk_config $make CROSS_COMPILE=arm-linux- all
(Using cross-toolchain 2.95.3 from http://ftp.arm.linux.org.uk/pub/armlinux/toolchain/)
This generated the requried u-boot, u-boot.bin, u-boot.srec files. I tried to run it from the target ARM SDRAM, but, nothing happened. No output at all.
Do I have to rewrite the entire configuration files for the new target board for u-boot to work on the new board? Any suggestions?
Thanks,
Shaks
_______________________________ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com