Dear Jens Scharsig,
Am 12.12.2010 um 20:12 schrieb Jens Scharsig:
Dear Andreas Bießmann
---8<---
@@ -65,7 +65,8 @@ LoopOsc: ldr r0, =SMRDATA ldr r1, _MTEXT_BASE sub r0, r0, r1
- add r2, r0, #80
- ldr r2, =SMRDATAE
- add r2, r2, r1
--->8---
Ok,this is wrong, But it is code from version 1. The V2 use the correct sub instruction.
you are right, I copied the wrong part here.
Then we subtract TEXT_BASE from absolute address of SMRDATA. This lead to some value about 0x500 in r0 which is completely wrong which in turn leads to data abort. ... It would make sense to me to do some construct like this for relocated code, but here we are before relocation and therefore it would be sufficient to
At boot time flash memory is mapded to 0x0. So the address 0x500 and 0x10000500 points the same location in flash.
That is correct. Sorry, I tested your patch with another textbase cause I can not get my openocd/arm-usb-tiny combo working with my at49bv6416 attached NOR flash.
regards
Andreas Bießmann