Enable PCIe/NVMe support. Also, enable the reset driver which is a prerequisite for PCIe support.
Signed-off-by: Tim Harvey tharvey@gateworks.com --- v3: no changes v2: no changes --- configs/imx8mm_venice_defconfig | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/configs/imx8mm_venice_defconfig b/configs/imx8mm_venice_defconfig index 517b70b69477..0f97b4b84243 100644 --- a/configs/imx8mm_venice_defconfig +++ b/configs/imx8mm_venice_defconfig @@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mm-venice-gw71xx-0x" CONFIG_SPL_TEXT_BASE=0x7E1000 CONFIG_TARGET_IMX8MM_VENICE=y CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_DM_RESET=y CONFIG_SYS_MONITOR_LEN=524288 CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y @@ -20,6 +21,7 @@ CONFIG_SPL_STACK=0x920000 CONFIG_SPL=y CONFIG_ENV_OFFSET_REDUND=0x3f8000 CONFIG_SYS_LOAD_ADDR=0x48200000 +CONFIG_PCI=y CONFIG_SYS_MEMTEST_START=0x40000000 CONFIG_SYS_MEMTEST_END=0x80000000 CONFIG_FIT=y @@ -60,6 +62,7 @@ CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_DHCP6=y @@ -120,6 +123,9 @@ CONFIG_PHY_GIGE=y CONFIG_FEC_MXC=y CONFIG_KSZ9477=y CONFIG_MII=y +CONFIG_NVME_PCI=y +CONFIG_PCIE_DW_IMX=y +CONFIG_PHY_IMX8M_PCIE=y CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_IMX8M=y