On some systems aligning PCI memory to a 1MB boundary every time a bridge is encountered may lead to exhausting the available memory space before all devices have been assigned addresses.
For example on the MIPS Boston development board we have an Intel EG20T Platform Controller Hub connected to a Xilinx AXI to PCIe root port which is only assigned a 1MB memory region. The Intel EG20T contains a bridge device beneath which all of its peripheral devices can be found, and that bridge device contains a ROM. If we align to 1MB when we encounter each bridge device we therefore do something like this:
- Start with bus_lower at 0x16000000.
- Find the Xilinx root bridge, which has no visible BARs so we do very little to it.
- Probe the bus beneath the Xilinx bridge device, aligning bus_lower to a 1MB boundary first. That leaves it still at 0x16000000.
- Find the EG20T bridge device, which we find has a 64KiB ROM. We assign it the address range 0x16000000-0x1600ffff which leaves bus_lower at 0x16010000.
- Probe the bus beneath the EG20T bridge device, aligning bus_lower to a 1MB boundary first. This leaves bus_lower at 0x16100000, which is the end of the available memory space.
- Find the various peripheral devices the EG20T contains, but fail to assign any memory space to them since bus_lower is at the end of the memory space available to the PCI bus.
This patch allows that 1MB alignment to be changed or disabled via Kconfig, so that systems such as this can select an alignment which works for them.
Signed-off-by: Paul Burton paul.burton@imgtec.com Cc: Daniel Schwierzeck daniel.schwierzeck@gmail.com Cc: Simon Glass sjg@chromium.org Cc: u-boot@lists.denx.de Signed-off-by: Paul Burton paul.burton@mips.com ---
drivers/pci/Kconfig | 7 +++++++ drivers/pci/pci_auto.c | 24 ++++++++++++++++-------- 2 files changed, 23 insertions(+), 8 deletions(-)
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 58f128d8a6..1605cfc8fa 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -26,6 +26,13 @@ config DM_PCI_COMPAT measure when porting a board to use driver model for PCI. Once the board is fully supported, this option should be disabled.
+config DM_PCI_BRIDGE_MEM_ALIGN + hex "PCI bridge memory alignment" + default 0x100000 + help + PCI memory space will be aligned to be a multiple of this value + whenever a PCI-to-PCI bridge is encountered. + config PCI_PNP bool "Enable Plug & Play support for PCI" depends on PCI || DM_PCI diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c index c2bc32678a..c4eee6f0ba 100644 --- a/drivers/pci/pci_auto.c +++ b/drivers/pci/pci_auto.c @@ -186,8 +186,10 @@ void dm_pciauto_prescan_setup_bridge(struct udevice *dev, int sub_bus) dm_pci_write_config8(dev, PCI_SUBORDINATE_BUS, 0xff);
if (pci_mem) { - /* Round memory allocator to 1MB boundary */ - pciauto_region_align(pci_mem, 0x100000); + /* Round memory allocator to a suitable boundary */ + if (CONFIG_DM_PCI_BRIDGE_MEM_ALIGN) + pciauto_region_align(pci_mem, + CONFIG_DM_PCI_BRIDGE_MEM_ALIGN);
/* * Set up memory and I/O filter limits, assume 32-bit @@ -200,8 +202,10 @@ void dm_pciauto_prescan_setup_bridge(struct udevice *dev, int sub_bus) }
if (pci_prefetch) { - /* Round memory allocator to 1MB boundary */ - pciauto_region_align(pci_prefetch, 0x100000); + /* Round memory allocator to a suitable boundary */ + if (CONFIG_DM_PCI_BRIDGE_MEM_ALIGN) + pciauto_region_align(pci_prefetch, + CONFIG_DM_PCI_BRIDGE_MEM_ALIGN);
/* * Set up memory and I/O filter limits, assume 32-bit @@ -260,8 +264,10 @@ void dm_pciauto_postscan_setup_bridge(struct udevice *dev, int sub_bus) dm_pci_write_config8(dev, PCI_SUBORDINATE_BUS, sub_bus - ctlr->seq);
if (pci_mem) { - /* Round memory allocator to 1MB boundary */ - pciauto_region_align(pci_mem, 0x100000); + /* Round memory allocator to a suitable boundary */ + if (CONFIG_DM_PCI_BRIDGE_MEM_ALIGN) + pciauto_region_align(pci_mem, + CONFIG_DM_PCI_BRIDGE_MEM_ALIGN);
dm_pci_write_config16(dev, PCI_MEMORY_LIMIT, (pci_mem->bus_lower - 1) >> 16); @@ -274,8 +280,10 @@ void dm_pciauto_postscan_setup_bridge(struct udevice *dev, int sub_bus) &prefechable_64); prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK;
- /* Round memory allocator to 1MB boundary */ - pciauto_region_align(pci_prefetch, 0x100000); + /* Round memory allocator to a suitable boundary */ + if (CONFIG_DM_PCI_BRIDGE_MEM_ALIGN) + pciauto_region_align(pci_prefetch, + CONFIG_DM_PCI_BRIDGE_MEM_ALIGN);
dm_pci_write_config16(dev, PCI_PREF_MEMORY_LIMIT, (pci_prefetch->bus_lower - 1) >> 16);