From: Holger Brunck holger.brunck@keymile.com
Use the generic header km_kirkwood.h and get rid of the board specific header.
Signed-off-by: Holger Brunck holger.brunck@keymile.com Signed-off-by: Valentin Longchamp valentin.longchamp@keymile.com cc: Gerlando Falauto gerlando.falauto@keymile.com cc: Prafulla Wadaskar prafulla@marvell.com --- board/keymile/km_arm/km_arm.c | 9 ++-- boards.cfg | 2 +- include/configs/km_kirkwood.h | 46 +++++++++++++++++++++ include/configs/mgcoge3un.h | 87 ----------------------------------------- 4 files changed, 51 insertions(+), 93 deletions(-) delete mode 100644 include/configs/mgcoge3un.h
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index ffe13cd..5133446 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -113,7 +113,7 @@ u32 kwmpp_config[] = { 0 };
-#if defined(CONFIG_MGCOGE3UN) +#if defined(CONFIG_KM_MGCOGE3UN) /* * Wait for startup OK from mgcoge3ne */ @@ -133,8 +133,7 @@ int startup_allowed(void) } #endif
-#if (defined(CONFIG_MGCOGE3UN)|defined(CONFIG_PORTL2)| \ - defined(CONFIG_KM_PIGGY4_88E6352)) +#if (defined(CONFIG_KM_PIGGY4_88E6061)|defined(CONFIG_KM_PIGGY4_88E6352)) /* * All boards with PIGGY4 connected via a simple switch have ethernet always * present. @@ -202,7 +201,7 @@ int misc_init_r(void) printf("Overwriting MACH_TYPE with %d!!!\n", mach_type); gd->bd->bi_arch_number = mach_type; } -#if defined(CONFIG_MGCOGE3UN) +#if defined(CONFIG_KM_MGCOGE3UN) char *wait_for_ne; wait_for_ne = getenv("waitforne"); if (wait_for_ne != NULL) { @@ -351,7 +350,7 @@ void dram_init_banksize(void) } }
-#if (defined(CONFIG_MGCOGE3UN)|defined(CONFIG_PORTL2)) +#if (defined(CONFIG_KM_MGCOGE3UN)|defined(CONFIG_PORTL2))
#define PHY_LED_SEL 0x18 #define PHY_LED0_LINK (0x5) diff --git a/boards.cfg b/boards.cfg index d174371..9e4de8e 100644 --- a/boards.cfg +++ b/boards.cfg @@ -141,7 +141,7 @@ dns325 arm arm926ejs - d-link km_kirkwood arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD,KM_DISABLE_PCI km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD_PCI,KM_RECONFIG_XLX kmnusa arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_NUSA -mgcoge3un arm arm926ejs km_arm keymile kirkwood +mgcoge3un arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_MGCOGE3UN kmcoge5un arm arm926ejs km_arm keymile kirkwood km_kirkwood:KMCOGE5UN portl2 arm arm926ejs km_arm keymile kirkwood inetspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:INETSPACE_V2 diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h index e6f0e36..d1f3351 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -58,6 +58,20 @@ #define CONFIG_KM_FPGA_CONFIG #define CONFIG_KM_PIGGY4_88E6352
+/* KM_MGCOGE3UN */ +#elif defined(CONFIG_KM_MGCOGE3UN) +#define CONFIG_IDENT_STRING "\nKeymile COGE3UN" +#define CONFIG_HOSTNAME mgcoge3un +#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/ +#undef CONFIG_SYS_KWD_CONFIG +#define CONFIG_SYS_KWD_CONFIG \ + $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg +#define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0" +#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3 +#define CONFIG_KM_DISABLE_PCIE +#define CONFIG_KM_PIGGY4_88E6061 + +/* KMCOGE5UN */ #elif defined(CONFIG_KMCOGE5UN) #define CONFIG_IDENT_STRING "\nKeymile COGE5UN" #define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/ @@ -111,7 +125,39 @@
#endif
+#ifdef CONFIG_KM_PIGGY4_88E6061 +/* + * Some keymile boards like mgcoge3un have their PIGGY4 connected via + * an Marvell 88E6061 simple switch. + * In this case we have to change the default settings for the + * ethernet phy connected to the kirkwood. + * In this case 100MB full duplex and autoneg off + */ +#define PORT_SERIAL_CONTROL_VALUE ( \ + MVGBE_FORCE_LINK_PASS | \ + MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ + MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ + MVGBE_ADV_NO_FLOW_CTRL | \ + MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ + MVGBE_FORCE_BP_MODE_NO_JAM | \ + (1 << 9) /* Reserved bit has to be 1 */ | \ + MVGBE_DO_NOT_FORCE_LINK_FAIL | \ + MVGBE_DIS_AUTO_NEG_SPEED_GMII | \ + MVGBE_DTE_ADV_0 | \ + MVGBE_MIIPHY_MAC_MODE | \ + MVGBE_AUTO_NEG_NO_CHANGE | \ + MVGBE_MAX_RX_PACKET_1552BYTE | \ + MVGBE_CLR_EXT_LOOPBACK | \ + MVGBE_SET_FULL_DUPLEX_MODE | \ + MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\ + MVGBE_SET_GMII_SPEED_TO_10_100 |\ + MVGBE_SET_MII_SPEED_TO_100) +#endif + /* GPIO Pin from kirkwood connected to PROGRAM_B pin of the xilinx FPGA */ #define KM_XLX_PROGRAM_B_PIN 39
+#ifdef CONFIG_KM_DISABLE_PCI +#undef CONFIG_KIRKWOOD_PCIE_INIT +#endif #endif /* _CONFIG_KM_KIRKWOOD */ diff --git a/include/configs/mgcoge3un.h b/include/configs/mgcoge3un.h deleted file mode 100644 index 156821c..0000000 --- a/include/configs/mgcoge3un.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Prafulla Wadaskar prafulla@marvell.com - * - * (C) Copyright 2009 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * (C) Copyright 2010-2011 - * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* for linking errors see - * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */ - -#ifndef _CONFIG_MGCOGE3UN_H -#define _CONFIG_MGCOGE3UN_H - -/* include common defines/options for all arm based Keymile boards */ -#include "km/km_arm.h" - -/* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nKeymile MGCOGE3UN" -#define CONFIG_HOSTNAME mgcoge3un -#define CONFIG_MGCOGE3UN - -#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/ -#define KM_ENV_BUS "pca9547:70:d" /* I2C2 (Mux-Port 5)*/ - -/* we use a new RAM type on mgcoge3un board */ -#undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg - -/* - * mgcoge3un has a fixed link to the marvell switch - * with 100MB full duplex and autoneg off, for this - * reason we have to change the default settings - */ -#define PORT_SERIAL_CONTROL_VALUE ( \ - MVGBE_FORCE_LINK_PASS | \ - MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ - MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ - MVGBE_ADV_NO_FLOW_CTRL | \ - MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ - MVGBE_FORCE_BP_MODE_NO_JAM | \ - (1 << 9) /* Reserved bit has to be 1 */ | \ - MVGBE_DO_NOT_FORCE_LINK_FAIL | \ - MVGBE_DIS_AUTO_NEG_SPEED_GMII | \ - MVGBE_DTE_ADV_0 | \ - MVGBE_MIIPHY_MAC_MODE | \ - MVGBE_AUTO_NEG_NO_CHANGE | \ - MVGBE_MAX_RX_PACKET_1552BYTE | \ - MVGBE_CLR_EXT_LOOPBACK | \ - MVGBE_SET_FULL_DUPLEX_MODE | \ - MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\ - MVGBE_SET_GMII_SPEED_TO_10_100 |\ - MVGBE_SET_MII_SPEED_TO_100) - -#define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0" -#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3 - -/* - * PCIe port not used on mgcoge3un - */ -#undef CONFIG_KIRKWOOD_PCIE_INIT - -#endif /* _CONFIG_MGCOGE3UN_H */