On 2023/6/5 2:53, Jan Kiszka wrote:
On 25.05.23 11:36, Yanhong Wang wrote:
Enable DWC_ETH_QOS and PHY_MOTORCOMM configuration to support ethernet function for StarFive VisionFive 2 board,including versions 1.2A and 1.3B.
Signed-off-by: Yanhong Wang yanhong.wang@starfivetech.com
configs/starfive_visionfive2_defconfig | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/configs/starfive_visionfive2_defconfig b/configs/starfive_visionfive2_defconfig index ffbc4b9476..c57708199d 100644 --- a/configs/starfive_visionfive2_defconfig +++ b/configs/starfive_visionfive2_defconfig @@ -7,7 +7,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000000 CONFIG_SF_DEFAULT_SPEED=100000000 CONFIG_SPL_DM_SPI=y -CONFIG_DEFAULT_DEVICE_TREE="jh7110-starfive-visionfive-2-v1.3b" +CONFIG_DEFAULT_DEVICE_TREE="jh7110-starfive-visionfive-2" CONFIG_SPL_TEXT_BASE=0x8000000 CONFIG_SYS_PROMPT="StarFive #" CONFIG_OF_LIBFDT_OVERLAY=y @@ -31,7 +31,7 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 debug rootwait earlycon=sbi" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr};fdt addr ${fdtcontroladdr};" -CONFIG_DEFAULT_FDT_FILE="starfive/jh7110-starfive-visionfive-2-v1.3b.dtb" +CONFIG_DEFAULT_FDT_FILE="starfive/jh7110-starfive-visionfive-2.dtb"
These two hunks belong into patch 7.
Ok, I'll move the two chunks to patch 7.
Jan
CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y CONFIG_SPL_MAX_SIZE=0x40000 @@ -54,6 +54,8 @@ CONFIG_SYS_BOOTM_LEN=0x4000000 CONFIG_CMD_MEMINFO=y CONFIG_CMD_TFTPPUT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y CONFIG_SPL_CLK_COMPOSITE_CCF=y CONFIG_CLK_COMPOSITE_CCF=y CONFIG_SPL_CLK_JH7110=y @@ -66,6 +68,13 @@ CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_GIGADEVICE=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_PHY_MOTORCOMM=y +CONFIG_DM_MDIO=y +CONFIG_DM_ETH_PHY=y +CONFIG_DWC_ETH_QOS=y +CONFIG_DWC_ETH_QOS_STARFIVE=y +CONFIG_RGMII=y +CONFIG_RMII=y CONFIG_PINCTRL=y CONFIG_PINCONF=y CONFIG_SPL_PINCTRL=y