Hi All,
I've been trying to boot a i.MX6UL based device I have here using SPL. It doesn't seem to want to work for me.
I see there's a number of i.MX6UL ports in U-Boot already, some use a custom DCD to configure the board, others seem to provide both options (DCD and SPL). Interestingly the Freescale i.MX 6UltraLite Evaluation Kit port (via mx6ul_14x14_evk_defconfig) appears to be using the SPL mechanism exclusively.
Can someone confirm that the above device boots using this config from SD card?
I seem to be able to boot from SD card using a custom DCD (which copies U-Boot into RAM), I'm also able to get the SPL to boot via USB (which copies the SPL to OCRAM). However when I try to boot the SPL from SD card it doesn't boot. If I boot the SPL via USB, insert an SD card and reset the device, it seems to boot from the SPL previously loaded from USB (as in it's still in the OCRAM) but carries on like it's booted from the SD card (looking on the SD card rather than USB for the main U-Boot image). The reason I think it's doing this is that if I rebuild U-Boot and flash a copy with an updated build time to the SD card, when I perform a reset I still see the old build time in the U-Boot banner. It looks to me like for some reason it's unable to copy the SPL to OCRAM, but carries on thinking it has.
Anyone got any pointers?
Thanks in advance,
Martyn