Since a clock function setup_gpmi_io_clk is implemented for GPMI IO clock settings, change to use this common function in GPMI setup.
Signed-off-by: Ye.Li B37916@freescale.com --- board/freescale/mx6qsabreauto/mx6qsabreauto.c | 25 ++----------------------- 1 files changed, 2 insertions(+), 23 deletions(-)
diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index 59387ff..a90360f 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -311,30 +311,9 @@ static void setup_gpmi_nand(void) /* config gpmi nand iomux */ imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads));
- /* gate ENFC_CLK_ROOT clock first,before clk source switch */ - clrbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK); - clrbits_le32(&mxc_ccm->CCGR4, - MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK); - - /* config gpmi and bch clock to 100 MHz */ - clrsetbits_le32(&mxc_ccm->cs2cdr, - MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK | - MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK | - MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK, - MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) | + setup_gpmi_io_clk((MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) | MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) | - MXC_CCM_CS2CDR_ENFC_CLK_SEL(3)); - - /* enable ENFC_CLK_ROOT clock */ - setbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK); - - /* enable gpmi and bch clock gating */ - setbits_le32(&mxc_ccm->CCGR4, - MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK | - MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK | - MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK | - MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK | - MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET); + MXC_CCM_CS2CDR_ENFC_CLK_SEL(3)));
/* enable apbh clock gating */ setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);