Adds SERDES voltage and reset SERDES lanes API and makes enable/disable DDR controller support 0.9V API common.
Signed-off-by: Ashish Kumar Ashish.Kumar@nxp.com Signed-off-by: Rajesh Bhagat rajesh.bhagat@nxp.com --- Changes in v7: - Used APIs clr/set/clrsetbits_le32() for code clarity
Changes in v6: - Corrected indentation/alignment issues at various places - Changed NULL ENTRY in srds_prctl_info array to id as zero - Corrected the PLL Reset logic, moved code inside for loop - Used error code(-EINVAL) in setup_serdes_volt API
Changes in v5: - Moved local macros to static functions - Used array to handle PRCTL mask and shift operations
Changes in v4: - Added local macros instead of magical numbers - Created macros to remove duplicate code
Changes in v3: Restructured LS1088A VID support to use common VID driver Cosmetic review comments fixed Added __iomem for accessing registers
Changes in v2: Checkpatch errors fixed
.../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 286 +++++++++++++++++++++ arch/arm/cpu/armv8/fsl-layerscape/soc.c | 39 +++ .../include/asm/arch-fsl-layerscape/fsl_serdes.h | 2 +- .../include/asm/arch-fsl-layerscape/immap_lsch3.h | 34 +++ arch/arm/include/asm/arch-fsl-layerscape/soc.h | 1 + 5 files changed, 361 insertions(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c index 179cac6..8dea8df 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c @@ -158,6 +158,292 @@ void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask, serdes_prtcl_map[NONE] = 1; }
+__weak int get_serdes_volt(void) +{ + return -1; +} + +__weak int set_serdes_volt(int svdd) +{ + return -1; +} + +#define LNAGCR0_RT_RSTB 0x00600000 + +#define RSTCTL_RESET_MASK 0x000000E0 + +#define RSTCTL_RSTREQ 0x80000000 +#define RSTCTL_RST_DONE 0x40000000 +#define RSTCTL_RSTERR 0x20000000 + +#define RSTCTL_SDEN 0x00000020 +#define RSTCTL_SDRST_B 0x00000040 +#define RSTCTL_PLLRST_B 0x00000080 + +#define TCALCR_CALRST_B 0x08000000 + +struct serdes_prctl_info { + u32 id; + u32 mask; + u32 shift; +}; + +struct serdes_prctl_info srds_prctl_info[] = { +#ifdef CONFIG_SYS_FSL_SRDS_1 + {.id = 1, + .mask = FSL_CHASSIS3_SRDS1_PRTCL_MASK, + .shift = FSL_CHASSIS3_SRDS1_PRTCL_SHIFT + }, + +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 + {.id = 2, + .mask = FSL_CHASSIS3_SRDS2_PRTCL_MASK, + .shift = FSL_CHASSIS3_SRDS2_PRTCL_SHIFT + }, +#endif + {.id = 0, .mask = 0, .shift = 0} /* NULL ENTRY */ +}; + +static int get_serdes_prctl_info_idx(u32 serdes_id) +{ + int pos = 0; + struct serdes_prctl_info *srds_info; + + /* loop until NULL ENTRY defined by .id=0 */ + for (srds_info = srds_prctl_info; srds_info->id != 0; + srds_info++, pos++) { + if (srds_info->id == serdes_id) + return pos; + } + + return -1; +} + +static void do_enabled_lanes_reset(u32 serdes_id, u32 cfg, + struct ccsr_serdes __iomem *serdes_base, + bool cmplt) +{ + int i, pos; + u32 cfg_tmp; + + pos = get_serdes_prctl_info_idx(serdes_id); + if (pos == -1) { + printf("invalid serdes_id %d\n", serdes_id); + return; + } + + cfg_tmp = cfg & srds_prctl_info[pos].mask; + cfg_tmp >>= srds_prctl_info[pos].shift; + + for (i = 0; i < 4 && cfg_tmp & (0xf << (3 - i)); i++) { + if (cmplt) + setbits_le32(&serdes_base->lane[i].gcr0, + LNAGCR0_RT_RSTB); + else + clrbits_le32(&serdes_base->lane[i].gcr0, + LNAGCR0_RT_RSTB); + } +} + +static void do_pll_reset(u32 cfg, + struct ccsr_serdes __iomem *serdes_base) +{ + int i; + + for (i = 0; i < 2 && !(cfg & (0x1 << (1 - i))); i++) { + clrbits_le32(&serdes_base->bank[i].rstctl, + RSTCTL_RESET_MASK); + udelay(1); + + setbits_le32(&serdes_base->bank[i].rstctl, + RSTCTL_RSTREQ); + } + udelay(1); +} + +static void do_rx_tx_cal_reset(struct ccsr_serdes __iomem *serdes_base) +{ + clrbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B); + clrbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B); +} + +static void do_rx_tx_cal_reset_comp(u32 cfg, int i, + struct ccsr_serdes __iomem *serdes_base) +{ + if (!(cfg == 0x3 && i == 1)) { + udelay(1); + setbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B); + setbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B); + } + udelay(1); +} + +static void do_pll_reset_done(u32 cfg, + struct ccsr_serdes __iomem *serdes_base) +{ + int i; + u32 reg = 0; + + for (i = 0; i < 2; i++) { + reg = in_le32(&serdes_base->bank[i].pllcr0); + if (!(cfg & (0x1 << (1 - i))) && ((reg >> 23) & 0x1)) { + setbits_le32(&serdes_base->bank[i].rstctl, + RSTCTL_RST_DONE); + } + } +} + +static void do_serdes_enable(u32 cfg, + struct ccsr_serdes __iomem *serdes_base) +{ + int i; + + for (i = 0; i < 2 && !(cfg & (0x1 << (1 - i))); i++) { + setbits_le32(&serdes_base->bank[i].rstctl, RSTCTL_SDEN); + udelay(1); + + setbits_le32(&serdes_base->bank[i].rstctl, RSTCTL_PLLRST_B); + udelay(1); + /* Take the Rx/Tx calibration out of reset */ + do_rx_tx_cal_reset_comp(cfg, i, serdes_base); + } +} + +static void do_pll_lock(u32 cfg, + struct ccsr_serdes __iomem *serdes_base) +{ + int i; + u32 reg = 0; + + for (i = 0; i < 2 && !(cfg & (0x1 << (1 - i))); i++) { + /* if the PLL is not locked, set RST_ERR */ + reg = in_le32(&serdes_base->bank[i].pllcr0); + if (!((reg >> 23) & 0x1)) { + setbits_le32(&serdes_base->bank[i].rstctl, + RSTCTL_RSTERR); + } else { + udelay(1); + setbits_le32(&serdes_base->bank[i].rstctl, + RSTCTL_SDRST_B); + udelay(1); + } + } +} + +int setup_serdes_volt(u32 svdd) +{ + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + struct ccsr_serdes __iomem *serdes1_base = + (void *)CONFIG_SYS_FSL_LSCH3_SERDES_ADDR; + u32 cfg_rcwsrds1 = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]); +#ifdef CONFIG_SYS_FSL_SRDS_2 + struct ccsr_serdes __iomem *serdes2_base = + (void *)(CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + 0x10000); + u32 cfg_rcwsrds2 = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS2_REGSR - 1]); +#endif + u32 cfg_tmp; + int svdd_cur, svdd_tar; + int ret = 1; + + /* Only support switch SVDD to 900mV */ + if (svdd != 900) + return -EINVAL; + + /* Scale up to the LTC resolution is 1/4096V */ + svdd = (svdd * 4096) / 1000; + + svdd_tar = svdd; + svdd_cur = get_serdes_volt(); + if (svdd_cur < 0) + return -EINVAL; + + debug("%s: current SVDD: %x; target SVDD: %x\n", + __func__, svdd_cur, svdd_tar); + if (svdd_cur == svdd_tar) + return 0; + + /* Put the all enabled lanes in reset */ +#ifdef CONFIG_SYS_FSL_SRDS_1 + do_enabled_lanes_reset(1, cfg_rcwsrds1, serdes1_base, false); +#endif + +#ifdef CONFIG_SYS_FSL_SRDS_2 + do_enabled_lanes_reset(2, cfg_rcwsrds2, serdes2_base, false); +#endif + + /* Put the all enabled PLL in reset */ +#ifdef CONFIG_SYS_FSL_SRDS_1 + cfg_tmp = cfg_rcwsrds1 & 0x3; + do_pll_reset(cfg_tmp, serdes1_base); +#endif + +#ifdef CONFIG_SYS_FSL_SRDS_2 + cfg_tmp = cfg_rcwsrds1 & 0xC; + cfg_tmp >>= 2; + do_pll_reset(cfg_tmp, serdes2_base); +#endif + + /* Put the Rx/Tx calibration into reset */ +#ifdef CONFIG_SYS_FSL_SRDS_1 + do_rx_tx_cal_reset(serdes1_base); +#endif + +#ifdef CONFIG_SYS_FSL_SRDS_2 + do_rx_tx_cal_reset(serdes2_base); +#endif + + ret = set_serdes_volt(svdd); + if (ret < 0) { + printf("could not change SVDD\n"); + ret = -1; + } + + /* For each PLL that’s not disabled via RCW enable the SERDES */ +#ifdef CONFIG_SYS_FSL_SRDS_1 + cfg_tmp = cfg_rcwsrds1 & 0x3; + do_serdes_enable(cfg_tmp, serdes1_base); +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 + cfg_tmp = cfg_rcwsrds1 & 0xC; + cfg_tmp >>= 2; + do_serdes_enable(cfg_tmp, serdes2_base); +#endif + + /* Wait for at at least 625us, ensure the PLLs being reset are locked */ + udelay(800); + +#ifdef CONFIG_SYS_FSL_SRDS_1 + cfg_tmp = cfg_rcwsrds1 & 0x3; + do_pll_lock(cfg_tmp, serdes1_base); +#endif + +#ifdef CONFIG_SYS_FSL_SRDS_2 + cfg_tmp = cfg_rcwsrds1 & 0xC; + cfg_tmp >>= 2; + do_pll_lock(cfg_tmp, serdes2_base); +#endif + /* Take the all enabled lanes out of reset */ +#ifdef CONFIG_SYS_FSL_SRDS_1 + do_enabled_lanes_reset(1, cfg_rcwsrds1, serdes1_base, true); +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 + do_enabled_lanes_reset(2, cfg_rcwsrds2, serdes2_base, true); +#endif + + /* For each PLL being reset, and achieved PLL lock set RST_DONE */ +#ifdef CONFIG_SYS_FSL_SRDS_1 + cfg_tmp = cfg_rcwsrds1 & 0x3; + do_pll_reset_done(cfg_tmp, serdes1_base); +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 + cfg_tmp = cfg_rcwsrds1 & 0xC; + cfg_tmp >>= 2; + do_pll_reset_done(cfg_tmp, serdes2_base); +#endif + return ret; +} + void fsl_serdes_init(void) { #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 497a4b5..4df708a 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -346,6 +346,45 @@ int sata_init(void) } #endif
+/* Get VDD in the unit mV from voltage ID */ +int get_core_volt_from_fuse(void) +{ + struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + int vdd; + u32 fusesr; + u8 vid; + + /* get the voltage ID from fuse status register */ + fusesr = in_le32(&gur->dcfg_fusesr); + debug("%s: fusesr = 0x%x\n", __func__, fusesr); + vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT) & + FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK; + if ((vid == 0) || (vid == FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK)) { + vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT) & + FSL_CHASSIS3_DCFG_FUSESR_VID_MASK; + } + debug("%s: VID = 0x%x\n", __func__, vid); + switch (vid) { + case 0x00: /* VID isn't supported */ + vdd = -EINVAL; + debug("%s: The VID feature is not supported\n", __func__); + break; + case 0x08: /* 0.9V silicon */ + vdd = 900; + break; + case 0x10: /* 1.0V silicon */ + vdd = 1000; + break; + default: /* Other core voltage */ + vdd = -EINVAL; + debug("%s: The VID(%x) isn't supported\n", __func__, vid); + break; + } + debug("%s: The required minimum volt of CORE is %dmV\n", __func__, vdd); + + return vdd; +} + #elif defined(CONFIG_FSL_LSCH2) #ifdef CONFIG_SCSI_AHCI_PLAT int sata_init(void) diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h index 12fd6b8..9becdf3 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h @@ -164,6 +164,7 @@ void fsl_rgmii_init(void); #ifdef CONFIG_FSL_LSCH2 const char *serdes_clock_to_string(u32 clock); int get_serdes_protocol(void); +#endif #ifdef CONFIG_SYS_HAS_SERDES /* Get the volt of SVDD in unit mV */ int get_serdes_volt(void); @@ -172,6 +173,5 @@ int set_serdes_volt(int svdd); /* The target volt of SVDD in unit mV */ int setup_serdes_volt(u32 svdd); #endif -#endif
#endif /* __FSL_SERDES_H__ */ diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 957e23b..47e8b5a 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -387,5 +387,39 @@ struct ccsr_reset { u32 ip_rev2; /* 0xbfc */ };
+struct ccsr_serdes { + struct { + u32 rstctl; /* Reset Control Register */ + u32 pllcr0; /* PLL Control Register 0 */ + u32 pllcr1; /* PLL Control Register 1 */ + u32 pllcr2; /* PLL Control Register 2 */ + u32 pllcr3; /* PLL Control Register 3 */ + u32 pllcr4; /* PLL Control Register 4 */ + u32 pllcr5; /* PLL Control Register 5 */ + u8 res[0x20 - 0x1c]; + } bank[2]; + u8 res1[0x90 - 0x40]; + u32 srdstcalcr; /* TX Calibration Control */ + u32 srdstcalcr1; /* TX Calibration Control1 */ + u8 res2[0xa0 - 0x98]; + u32 srdsrcalcr; /* RX Calibration Control */ + u32 srdsrcalcr1; /* RX Calibration Control1 */ + u8 res3[0xb0 - 0xa8]; + u32 srdsgr0; /* General Register 0 */ + u8 res4[0x800 - 0xb4]; + struct serdes_lane { + u32 gcr0; /* General Control Register 0 */ + u32 gcr1; /* General Control Register 1 */ + u32 gcr2; /* General Control Register 2 */ + u32 ssc0; /* Speed Switch Control 0 */ + u32 rec0; /* Receive Equalization Control 0 */ + u32 rec1; /* Receive Equalization Control 1 */ + u32 tec0; /* Transmit Equalization Control 0 */ + u32 ssc1; /* Speed Switch Control 1 */ + u8 res1[0x840 - 0x820]; + } lane[8]; + u8 res5[0x19fc - 0xa00]; +}; + #endif /*__ASSEMBLY__*/ #endif /* __ARCH_FSL_LSCH3_IMMAP_H_ */ diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h index 247f09e..ee418d0 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h @@ -119,6 +119,7 @@ struct ccsr_ahci {
#ifdef CONFIG_FSL_LSCH3 void fsl_lsch3_early_init_f(void); +int get_core_volt_from_fuse(void); #elif defined(CONFIG_FSL_LSCH2) void fsl_lsch2_early_init_f(void); int setup_chip_volt(void);