On Tue, Apr 4, 2017 at 1:43 PM, Jagan Teki jagannadh.teki@gmail.com wrote:
Full Log:
boards.cfg is up to date. Nothing to do. Summary of 36 commits for 1275 boards (12 threads, 1 job per thread) 01: sunxi: fix ACTLR.SMP assembly routine aarch64: + orangepi_pc2 blackfin: + cm-bf561 blackstamp bf527-ezkit-v2 br4 cm-bf527 bf506f-ezkit ip04 bf527-sdp bf527-ad7160-eval bf609-ezkit tcm-bf518 bf527-ezkit bf533-ezkit ibf-dsp561 bf537-minotaur bf537-pnav bf537-srv1 cm-bf548 bf548-ezkit bf525-ucr2 blackvme pr1 bf518f-ezbrd bf526-ezbrd x86: + galileo conga-qeval20-qa3-e3845-internal-uart qemu-x86_64 conga-qeval20-qa3-e3845 bayleybay theadorable-x86-dfi-bt700 qemu-x86_efi_payload64 minnowmax dfi-bt700-q7x-151 som-db5800-som-6867 chromebook_link64 arm: + CHIP_pro sun8i_a23_evb nanopi_neo_air Sunchip_CX-A99 mx6sxsabreauto +/bin/sh: 1: bfin-uclinux-ldr: not found +make[1]: *** [u-boot.ldr] Error 127 +make: *** [sub-make] Error 2 +make[1]: bfin-uclinux-ldr: Command not found +/bin/sh: 1: iasl: not found +mv: cannot stat '../board/intel/galileo/dsdt.hex': No such file or directory +make[2]: *** [board/intel/galileo/dsdt.c] Error 1 +make[1]: *** [board/intel/galileo] Error 2
- if (i2c_read(chip, addr, 1, &valb, 1))
- ^
- return i2c_write(chip, addr, 1, &valb, 1);
+cc1: error: -mcpu=bf506-0.0 is not valid +cc1: error: unrecognized command line option '-mcpu=bf506-0.0' +make[2]: *** [u-boot.cfg] Error 1 +make[1]: *** No rule to make target `include/config/auto.conf', needed by `include/config/uboot.release'. Stop. +cc1: error: -mcpu=bf609-0.0 is not valid +cc1: error: unrecognized command line option '-mcpu=bf609-0.0' +mv: cannot stat '../board/congatec/conga-qeval20-qa3-e3845/dsdt.hex': No such file or directory +make[2]: *** [board/congatec/conga-qeval20-qa3-e3845/dsdt.c] Error 1 +make[1]: *** [board/congatec/conga-qeval20-qa3-e3845] Error 2
Toolchain issues?
+make[2]: *** [orangepi_pc2_defconfig] Error 1 +make[1]: *** [orangepi_pc2_defconfig] Error 2 +make[2]: *** [CHIP_pro_defconfig] Error 1 +make[1]: *** [CHIP_pro_defconfig] Error 2
New boards introduced not available at the start of the series.
+mv: cannot stat '../board/dfi/dfi-bt700/dsdt.hex': No such file or directory +make[2]: *** [board/dfi/dfi-bt700/dsdt.c] Error 1 +make[1]: *** [board/dfi/dfi-bt700] Error 2 +In file included from ../arch/x86/include/asm/bitops.h:18:0,
from ../include/linux/bitops.h:123,from ../include/common.h:25,from ../lib/asm-offsets.c:15:- if (!(word & (~0ul << 32))) {
- ^
- word <<= 32;
- if (!(word & (~0ul << (BITS_PER_LONG-16)))) {
- if (!(word & (~0ul << (BITS_PER_LONG-8)))) {
- if (!(word & (~0ul << (BITS_PER_LONG-4)))) {
- if (!(word & (~0ul << (BITS_PER_LONG-2)))) {
- if (!(word & (~0ul << (BITS_PER_LONG-1))))
from ../arch/x86/lib/asm-offsets.c:15:from ../arch/x86/cpu/cpu.c:22:from ../arch/x86/cpu/cpu_x86.c:7:from ../arch/x86/cpu/intel_common/cpu.c:7:from ../arch/x86/cpu/intel_common/lpc.c:7:from ../arch/x86/cpu/intel_common/microcode.c:10:+../arch/x86/cpu/intel_common/microcode.c: In function 'microcode_read_rev': +../arch/x86/cpu/intel_common/microcode.c:79:2: error: PIC register clobbered by 'ebx' in 'asm'
- asm volatile (
+make[3]: *** [arch/x86/cpu/intel_common/microcode.o] Error 1 +make[2]: *** [arch/x86/cpu/intel_common] Error 2 +make[1]: *** [arch/x86/cpu] Error 2 +mv: cannot stat '../board/intel/bayleybay/dsdt.hex': No such file or directory +make[2]: *** [board/intel/bayleybay/dsdt.c] Error 1 +make[1]: *** [board/intel/bayleybay] Error 2 +make[2]: *** [sun8i_a23_evb_defconfig] Error 1 +make[1]: *** [sun8i_a23_evb_defconfig] Error 2 +../arch/x86/lib/crt0_x86_64_efi.S: Assembler messages: +../arch/x86/lib/crt0_x86_64_efi.S:16: Error: bad register name `%rsp' +../arch/x86/lib/crt0_x86_64_efi.S:17: Error: bad register name `%rcx' +../arch/x86/lib/crt0_x86_64_efi.S:18: Error: bad register name `%rdx' +../arch/x86/lib/crt0_x86_64_efi.S:21: Error: bad register name `%rip)' +../arch/x86/lib/crt0_x86_64_efi.S:22: Error: bad register name `%rip)' +../arch/x86/lib/crt0_x86_64_efi.S:24: Error: bad register name `%rcx' +../arch/x86/lib/crt0_x86_64_efi.S:25: Error: bad register name `%rdx' +../arch/x86/lib/crt0_x86_64_efi.S:26: Error: bad register name `%rcx' +../arch/x86/lib/crt0_x86_64_efi.S:27: Error: bad register name `%rdx' +../arch/x86/lib/crt0_x86_64_efi.S:30: Error: bad register name `%rdi' +../arch/x86/lib/crt0_x86_64_efi.S:31: Error: bad register name `%rsi' +../arch/x86/lib/crt0_x86_64_efi.S:34: Error: bad register name `%rsp' +../arch/x86/lib/crt0_x86_64_efi.S:47: Warning: setting incorrect section attributes for .reloc +make[2]: *** [arch/x86/lib/crt0_x86_64_efi.o] Error 1 +make[1]: *** [arch/x86/lib] Error 2 +make[2]: *** [Sunchip_CX-A99_defconfig] Error 1 +make[1]: *** [Sunchip_CX-A99_defconfig] Error 2 +make[2]: *** [nanopi_neo_air_defconfig] Error 1 +make[1]: *** [nanopi_neo_air_defconfig] Error 2 +mv: cannot stat '../board/intel/minnowmax/dsdt.hex': No such file or directory +make[2]: *** [board/intel/minnowmax/dsdt.c] Error 1 +make[1]: *** [board/intel/minnowmax] Error 2
The above seem like existing errors completely unrelated that are completely unrelated to the series you're testing, especially since the first patch here is sunxi specific.
+mv: cannot stat '../board/advantech/som-db5800-som-6867/dsdt.hex': No such file or directory +make[2]: *** [board/advantech/som-db5800-som-6867/dsdt.c] Error 1 +make[1]: *** [board/advantech/som-db5800-som-6867] Error 2 w+../drivers/gpio/pca953x.c: In function 'pca953x_reg_write': w+../drivers/gpio/pca953x.c:68:3: warning: implicit declaration of function 'i2c_read' [-Wimplicit-function-declaration] w+../drivers/gpio/pca953x.c:74:3: warning: implicit declaration of function 'i2c_write' [-Wimplicit-function-declaration] w+../drivers/usb/musb/musb_hcd.c: In function 'config_hub_port': w+../drivers/usb/musb/musb_hcd.c:405:5: warning: variable 'hub' set but not used [-Wunused-but-set-variable] w+../drivers/usb/musb/musb_core.c: In function 'musb_configure_ep': w+../drivers/usb/musb/musb_core.c:71:6: warning: variable 'idx' set but not used [-Wunused-but-set-variable] w+../board/bf533-ezkit/flash.c: In function 'read_data': w+../board/bf533-ezkit/flash.c:241:6: warning: variable 'iShift' set but not used [-Wunused-but-set-variable] w+../drivers/net/ax88180.c: In function 'ax88180_mac_reset': w+../drivers/net/ax88180.c:132:16: warning: variable 'tmpval' set but not used [-Wunused-but-set-variable] w+../drivers/net/ax88180.c: In function 'ax88180_recv': w+../drivers/net/ax88180.c:577:17: warning: variable 'tmp_regval' set but not used [-Wunused-but-set-variable] w+../include/asm-generic/bitops/__fls.h: In function '__fls': w+../include/asm-generic/bitops/__fls.h:17:2: warning: left shift count >= width of type w+../include/asm-generic/bitops/__fls.h:19:3: warning: left shift count >= width of type w+../include/asm-generic/bitops/__fls.h:22:2: warning: left shift count >= width of type w+../include/asm-generic/bitops/__fls.h:26:2: warning: left shift count >= width of type w+../include/asm-generic/bitops/__fls.h:30:2: warning: left shift count >= width of type w+../include/asm-generic/bitops/__fls.h:34:2: warning: left shift count >= width of type w+../include/asm-generic/bitops/__fls.h:38:2: warning: left shift count >= width of type
Same here.
02: ARM: rename CONFIG_TIMER_CLK_FREQ to COUNTER_FREQUENCY 03: fsl: ls102x: remove redundant GENERIC_TIMER_CLK 04: sunxi: simplify ACTLR.SMP bit set #ifdef 05: sunxi: configs: merge sun9i and sun50i SPL memory definitions 06: sunxi: Kconfig: introduce CONFIG_SUNXI_HIGH_SRAM 07: sunxi: provide ARMv8 mem_map for every ARM64 board 08: SPI: SPL: sunxi: fix 64-bit build 09: sunxi: DRAM: add Allwinner H5 support 10: sunxi: prepare for sharing MACH_SUN8I_H3 config symbol 11: sunxi: introduce Allwinner H5 config option 12: sunxi: Add OrangePi PC 2 initial support -make[2]: *** [orangepi_pc2_defconfig] Error 1 -make[1]: *** [orangepi_pc2_defconfig] Error 2 +ERROR: File too large! +make[2]: *** [spl/sunxi-spl.bin] Error 1 +make[1]: *** [spl/u-boot-spl] Error 2 13: sunxi: add NanoPi NEO Air defconfig arm: nanopi_neo_air -make[2]: *** [nanopi_neo_air_defconfig] Error 1 -make[1]: *** [nanopi_neo_air_defconfig] Error 2 14: nand: sunxi: Fix modulo by zero error 15: bch: Allow to build for the host 16: tools: sunxi: Add spl image builder 17: common: Move environment choice to Kconfig arm: + Nintendo_NES_Classic_Edition CHIP +In file included from ../include/common.h:987:0, +../include/environment.h:154:19: error: 'CONFIG_ENV_SIZE' undeclared here (not in a function)
- #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE)
^+../include/environment.h:162:21: note: in expansion of macro 'ENV_SIZE'
- unsigned char data[ENV_SIZE]; /* Environment data */
^+make[2]: *** [lib/asm-offsets.s] Error 1 +make[1]: *** [prepare0] Error 2
Known breakage, fixed by "sunxi: Add default environment size", the second last patch in the current sunxi/master-pr branch.
18: cmd: Add Kconfig option for CMD_MTDPARTS and related options 19: mtd: ubi: Select RBTREE option from MTD_UBI Kconfig entry 20: cmd: Expose a Kconfig option to enable UBIFS commands 21: cmd: nand: Expose optional suboptions in Kconfig 22: mtd: sunxi: Select the U-Boot location config option 23: mtd: sunxi: Change U-Boot offset 24: sunxi: Enable UBI and NAND support -In file included from ../include/common.h:987:0, -../include/environment.h:154:19: error: 'CONFIG_ENV_SIZE' undeclared here (not in a function)
- #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE)
-../include/environment.h:162:21: note: in expansion of macro 'ENV_SIZE'
- unsigned char data[ENV_SIZE]; /* Environment data */
^-make[2]: *** [lib/asm-offsets.s] Error 1 -make[1]: *** [prepare0] Error 2 -ERROR: File too large! -make[2]: *** [spl/sunxi-spl.bin] Error 1 -make[1]: *** [spl/u-boot-spl] Error 2 +../cmd/nand.c: In function 'set_dev': +../cmd/nand.c:118:24: error: 'CONFIG_SYS_MAX_NAND_DEVICE' undeclared (first use in this function)
- if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[dev]) {
^+../cmd/nand.c:118:24: note: each undeclared identifier is reported only once for each function it appears in +../cmd/nand.c: In function 'do_nand': +../cmd/nand.c:400:19: error: 'CONFIG_SYS_MAX_NAND_DEVICE' undeclared (first use in this function)
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) {
+../cmd/nand.c: In function 'do_nandboot': +../cmd/nand.c:994:24: error: 'CONFIG_SYS_MAX_NAND_DEVICE' undeclared (first use in this function)
- if (idx < 0 || idx >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[idx]) {
+make[2]: *** [cmd/nand.o] Error 1 +make[1]: *** [cmd] Error 2
Known breakage, fixed by "cmd: nand: Make the NAND options default to NAND_SUNXI", the third last patch in the current sunxi/master-pr branch.
25: sunxi: Add the default mtdids and mtdparts to our env 26: nand: sunxi: Add options for the SPL NAND configuration 27: scripts: sunxi: Build an raw SPL image 28: sunxi: Sync GR8 DTS and AXP209 with the kernel 29: sunxi: Add support for the CHIP Pro arm: CHIP_pro -make[2]: *** [CHIP_pro_defconfig] Error 1 -make[1]: *** [CHIP_pro_defconfig] Error 2 30: ARM: dts: sun9i: Add mmc1 pinmux setting 31: arm: sunxi: Add Sunchip CX-A99 initial support -make[2]: *** [Sunchip_CX-A99_defconfig] Error 1 -make[1]: *** [Sunchip_CX-A99_defconfig] Error 2 32: sunxi: Add boards/sunxi and arch/arm/mach-sunxi to sunxi MAINTAINERS entry 33: cmd: ubifs: Add a dependency on CMD_UBI 34: cmd: nand: Make the NAND options default to NAND_SUNXI arm: Sunchip_CX-A99 -../cmd/nand.c: In function 'set_dev': -../cmd/nand.c:118:24: error: 'CONFIG_SYS_MAX_NAND_DEVICE' undeclared (first use in this function)
- if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[dev]) {
^-../cmd/nand.c:118:24: note: each undeclared identifier is reported only once for each function it appears in -../cmd/nand.c: In function 'do_nand': -../cmd/nand.c:400:19: error: 'CONFIG_SYS_MAX_NAND_DEVICE' undeclared (first use in this function)
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) {
-../cmd/nand.c: In function 'do_nandboot': -../cmd/nand.c:994:24: error: 'CONFIG_SYS_MAX_NAND_DEVICE' undeclared (first use in this function)
- if (idx < 0 || idx >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[idx]) {
-make[2]: *** [cmd/nand.o] Error 1 -make[1]: *** [cmd] Error 2 +In file included from ../include/common.h:987:0, +../include/environment.h:154:19: error: 'CONFIG_ENV_SIZE' undeclared here (not in a function)
- #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE)
+../include/environment.h:162:21: note: in expansion of macro 'ENV_SIZE'
- unsigned char data[ENV_SIZE]; /* Environment data */
^+make[2]: *** [lib/asm-offsets.s] Error 1 +make[1]: *** [prepare0] Error 2 +ERROR: File too large! +make[2]: *** [spl/sunxi-spl.bin] Error 1 +make[1]: *** [spl/u-boot-spl] Error 2 35: sunxi: Add default environment size arm: Nintendo_NES_Classic_Edition CHIP -In file included from ../include/common.h:987:0, -../include/environment.h:154:19: error: 'CONFIG_ENV_SIZE' undeclared here (not in a function)
- #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE)
^-../include/environment.h:162:21: note: in expansion of macro 'ENV_SIZE'
- unsigned char data[ENV_SIZE]; /* Environment data */
^-make[2]: *** [lib/asm-offsets.s] Error 1 -make[1]: *** [prepare0] Error 2 36: sunxi: Add defconfig for Allwinner A23 EVB arm: sun8i_a23_evb -make[2]: *** [sun8i_a23_evb_defconfig] Error 1 -make[1]: *** [sun8i_a23_evb_defconfig] Error 2
At the end the sunxi targets are all buildable. You could squash the fix patches into the original patches if the intermediate build failures are of concern.
Regards ChenYu