From: Bhupesh Sharma bhupesh.linux@gmail.com
Sync u-boot UFS driver to add all possible UFS Quirks as supported by Linux UFS driver as well.
Synced with include/ufs/ufshcd.h from Linux v6.11 release
Signed-off-by: Bhupesh Sharma bhupesh.sharma@linaro.org Tested-by: Venkatesh Yadav Abbarapu venkatesh.abbarapu@amd.com --- drivers/ufs/ufs.h | 197 +++++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 164 insertions(+), 33 deletions(-)
diff --git a/drivers/ufs/ufs.h b/drivers/ufs/ufs.h index 555f8a6857d..c1c6d15db4a 100644 --- a/drivers/ufs/ufs.h +++ b/drivers/ufs/ufs.h @@ -703,6 +703,169 @@ struct ufs_hba_ops { int (*phy_initialization)(struct ufs_hba *hba); };
+enum ufshcd_quirks { + /* Interrupt aggregation support is broken */ + UFSHCD_QUIRK_BROKEN_INTR_AGGR = 1 << 0, + + /* + * delay before each dme command is required as the unipro + * layer has shown instabilities + */ + UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS = 1 << 1, + + /* + * If UFS host controller is having issue in processing LCC (Line + * Control Command) coming from device then enable this quirk. + * When this quirk is enabled, host controller driver should disable + * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE + * attribute of device to 0). + */ + UFSHCD_QUIRK_BROKEN_LCC = 1 << 2, + + /* + * The attribute PA_RXHSUNTERMCAP specifies whether or not the + * inbound Link supports unterminated line in HS mode. Setting this + * attribute to 1 fixes moving to HS gear. + */ + UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP = 1 << 3, + + /* + * This quirk needs to be enabled if the host controller only allows + * accessing the peer dme attributes in AUTO mode (FAST AUTO or + * SLOW AUTO). + */ + UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE = 1 << 4, + + /* + * This quirk needs to be enabled if the host controller doesn't + * advertise the correct version in UFS_VER register. If this quirk + * is enabled, standard UFS host driver will call the vendor specific + * ops (get_ufs_hci_version) to get the correct version. + */ + UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION = 1 << 5, + + /* + * Clear handling for transfer/task request list is just opposite. + */ + UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR = 1 << 6, + + /* + * This quirk needs to be enabled if host controller doesn't allow + * that the interrupt aggregation timer and counter are reset by s/w. + */ + UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR = 1 << 7, + + /* + * This quirks needs to be enabled if host controller cannot be + * enabled via HCE register. + */ + UFSHCI_QUIRK_BROKEN_HCE = 1 << 8, + + /* + * This quirk needs to be enabled if the host controller regards + * resolution of the values of PRDTO and PRDTL in UTRD as byte. + */ + UFSHCD_QUIRK_PRDT_BYTE_GRAN = 1 << 9, + + /* + * This quirk needs to be enabled if the host controller reports + * OCS FATAL ERROR with device error through sense data + */ + UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR = 1 << 10, + + /* + * This quirk needs to be enabled if the host controller has + * auto-hibernate capability but it doesn't work. + */ + UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8 = 1 << 11, + + /* + * This quirk needs to disable manual flush for write booster + */ + UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL = 1 << 12, + + /* + * This quirk needs to disable unipro timeout values + * before power mode change + */ + UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING = 1 << 13, + + /* + * This quirk needs to be enabled if the host controller does not + * support UIC command + */ + UFSHCD_QUIRK_BROKEN_UIC_CMD = 1 << 15, + + /* + * This quirk needs to be enabled if the host controller cannot + * support physical host configuration. + */ + UFSHCD_QUIRK_SKIP_PH_CONFIGURATION = 1 << 16, + + /* + * This quirk needs to be enabled if the host controller has + * 64-bit addressing supported capability but it doesn't work. + */ + UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS = 1 << 17, + + /* + * This quirk needs to be enabled if the host controller has + * auto-hibernate capability but it's FASTAUTO only. + */ + UFSHCD_QUIRK_HIBERN_FASTAUTO = 1 << 18, + + /* + * This quirk needs to be enabled if the host controller needs + * to reinit the device after switching to maximum gear. + */ + UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH = 1 << 19, + + /* + * Some host raises interrupt (per queue) in addition to + * CQES (traditional) when ESI is disabled. + * Enable this quirk will disable CQES and use per queue interrupt. + */ + UFSHCD_QUIRK_MCQ_BROKEN_INTR = 1 << 20, + + /* + * Some host does not implement SQ Run Time Command (SQRTC) register + * thus need this quirk to skip related flow. + */ + UFSHCD_QUIRK_MCQ_BROKEN_RTC = 1 << 21, + + /* + * This quirk needs to be enabled if the host controller supports inline + * encryption but it needs to initialize the crypto capabilities in a + * nonstandard way and/or needs to override blk_crypto_ll_ops. If + * enabled, the standard code won't initialize the blk_crypto_profile; + * ufs_hba_variant_ops::init() must do it instead. + */ + UFSHCD_QUIRK_CUSTOM_CRYPTO_PROFILE = 1 << 22, + + /* + * This quirk needs to be enabled if the host controller supports inline + * encryption but does not support the CRYPTO_GENERAL_ENABLE bit, i.e. + * host controller initialization fails if that bit is set. + */ + UFSHCD_QUIRK_BROKEN_CRYPTO_ENABLE = 1 << 23, + + /* + * This quirk needs to be enabled if the host controller driver copies + * cryptographic keys into the PRDT in order to send them to hardware, + * and therefore the PRDT should be zeroized after each request (as per + * the standard best practice for managing keys). + */ + UFSHCD_QUIRK_KEYS_IN_PRDT = 1 << 24, + + /* + * This quirk indicates that the controller reports the value 1 (not + * supported) in the Legacy Single DoorBell Support (LSDBS) bit of the + * Controller Capabilities register although it supports the legacy + * single doorbell mode. + */ + UFSHCD_QUIRK_BROKEN_LSDBS_CAP = 1 << 25, +}; + struct ufs_hba { struct udevice *dev; void __iomem *mmio_base; @@ -711,39 +874,7 @@ struct ufs_hba { u32 capabilities; u32 version; u32 intr_mask; - u32 quirks; -/* - * If UFS host controller is having issue in processing LCC (Line - * Control Command) coming from device then enable this quirk. - * When this quirk is enabled, host controller driver should disable - * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE - * attribute of device to 0). - */ -#define UFSHCD_QUIRK_BROKEN_LCC BIT(0) - -/* - * This quirk needs to be enabled if the host controller has - * 64-bit addressing supported capability but it doesn't work. - */ -#define UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS BIT(1) - -/* - * This quirk needs to be enabled if the host controller has - * auto-hibernate capability but it's FASTAUTO only. - */ -#define UFSHCD_QUIRK_HIBERN_FASTAUTO BIT(2) - -/* - * This quirk needs to be enabled if the host controller has - * 64-bit addressing supported capability but it doesn't work. - */ -#define UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS 0x2 - -/* - * This quirk needs to be enabled if the host controller has - * auto-hibernate capability but it's FASTAUTO only. - */ -#define UFSHCD_QUIRK_HIBERN_FASTAUTO 0x4 + enum ufshcd_quirks quirks;
/* Virtual memory reference */ struct utp_transfer_cmd_desc *ucdl;