Adjust the configuration to use the driver model version of the pl01x serial driver. Add the required platform data.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: - Adjust header file include to dm/platform_data/...
board/raspberrypi/rpi/rpi.c | 12 ++++++++++++ include/configs/rpi.h | 6 +++--- 2 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c index aaded88..5ebafd7 100644 --- a/board/raspberrypi/rpi/rpi.c +++ b/board/raspberrypi/rpi/rpi.c @@ -24,6 +24,7 @@ #include <asm/arch/mbox.h> #include <asm/arch/sdhci.h> #include <asm/global_data.h> +#include <dm/platform_data/serial_pl01x.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -36,6 +37,17 @@ U_BOOT_DEVICE(bcm2835_gpios) = { .platdata = &gpio_platdata, };
+static const struct pl01x_serial_platdata serial_platdata = { + .base = 0x20201000, + .type = TYPE_PL011, + .clock = 3000000, +}; + +U_BOOT_DEVICE(bcm2835_serials) = { + .name = "serial_pl01x", + .platdata = &serial_platdata, +}; + struct msg_get_arm_mem { struct bcm2835_mbox_hdr hdr; struct bcm2835_mbox_tag_get_arm_mem get_arm_mem; diff --git a/include/configs/rpi.h b/include/configs/rpi.h index 4d5426e..c94f411 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -34,6 +34,7 @@ #define CONFIG_DM #define CONFIG_CMD_DM #define CONFIG_DM_GPIO +#define CONFIG_DM_SERIAL
/* Memory layout */ #define CONFIG_NR_DRAM_BANKS 1 @@ -51,6 +52,7 @@ CONFIG_SYS_SDRAM_SIZE - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MALLOC_LEN SZ_4M +#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_SYS_MEMTEST_START 0x00100000 #define CONFIG_SYS_MEMTEST_END 0x00200000 #define CONFIG_LOADADDR 0x00200000 @@ -92,9 +94,7 @@ #endif
/* Console UART */ -#define CONFIG_PL011_SERIAL -#define CONFIG_PL011_CLOCK 3000000 -#define CONFIG_PL01x_PORTS { (void *)0x20201000 } +#define CONFIG_PL01X_SERIAL #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 115200