Hi Patrice, Patrice CHOTARD wrote,
Waldemar,
You can applied the following series on current U-Boot master branch (a0759684e015bd7252be3af508c0fcfdbb8ec5dc):
https://patchwork.ozlabs.org/project/uboot/list/?series=318991
I applied the patches on top of u-boot master and the non-SPL build still works fine. It seems only 2022.07 is broken, master is fine.
The SPL build compiles, but I get no output via serial console after flashing. I changed the openocd command to use 0x8009000 for u-boot.
/home/wbx/openadk/host_x86_64-linux-gnu/usr/bin/openocd \ -f interface/stlink.cfg -f board/stm32f7discovery.cfg \ -c "init" \ -c "reset init" \ -c "flash probe 0" \ -c "flash info 0" \ -c "flash write_image erase spl/u-boot-spl.bin 0x08000000" \ -c "flash write_image erase u-boot-dtb.bin 0x08009000" \ -c "reset run" \ -c "shutdown"
Is this change correct or do I misread your patches?
BTW: Do you have a working Linux configuration file you can share with me? Which Linux version do you use on the device?
best regards Waldemar