Define bootscript and its header addresses for QSPI target. Also define PPA header address to enable PPA validation.
Signed-off-by: Vinitha Pillai vinitha.pillai@nxp.com Signed-off-by: Sumit Garg sumit.garg@nxp.com ---
Changes in v2: Split patches logically from 2 to 3.
arch/arm/include/asm/arch-fsl-layerscape/config.h | 2 +- arch/arm/include/asm/fsl_secure_boot.h | 37 ++++++++++++++++------- 2 files changed, 27 insertions(+), 12 deletions(-)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index 4201e0f..11a62e8 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -196,7 +196,7 @@
#define CONFIG_SYS_FSL_IFC_BE #define CONFIG_SYS_FSL_SFP_VER_3_2 -#define CONFIG_SYS_FSL_SNVS_LE +#define CONFIG_SYS_FSL_SEC_MON_BE #define CONFIG_SYS_FSL_SFP_BE #define CONFIG_SYS_FSL_SRK_LE #define CONFIG_KEY_REVOCATION diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index 4525287..933e09c 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -45,7 +45,8 @@ #define CONFIG_CMD_HASH #define CONFIG_KEY_REVOCATION #ifndef CONFIG_SYS_RAMBOOT -/* The key used for verification of next level images +/* + * The key used for verification of next level images * is picked up from an Extension Table which has * been verified by the ISBC (Internal Secure boot Code) * in boot ROM of the SoC. @@ -59,9 +60,10 @@
#endif
-#if defined(CONFIG_LS1043A) || defined(CONFIG_LS2080A) -/* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit - * Similiarly for LS2080 +#if defined(CONFIG_FSL_LAYERSCAPE) +/* + * For fsl layerscape based platforms, ESBC image Address in Header + * is 64 bit. */ #define CONFIG_ESBC_ADDR_64BIT #endif @@ -78,13 +80,16 @@ "setenv hwconfig 'fsl_ddr:ctlr_intlv=null,bank_intlv=null';" #endif
-/* Copying Bootscript and Header to DDR from NOR for LS2 and for rest, from - * Non-XIP Memory (Nand/SD)*/ +/* + * Copying Bootscript and Header to DDR from NOR for LS2 and for rest, from + * Non-XIP Memory (Nand/SD) + */ #if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_LS2080A) || \ defined(CONFIG_SD_BOOT) #define CONFIG_BOOTSCRIPT_COPY_RAM #endif -/* The address needs to be modified according to NOR, NAND, SD and +/* + * The address needs to be modified according to NOR, NAND, SD and * DDR memory map */ #ifdef CONFIG_LS2080A @@ -96,19 +101,26 @@ #define CONFIG_BS_SIZE 0x00001000 #else #ifdef CONFIG_SD_BOOT -/* For SD boot address and size are assigned in terms of sector +/* + * For SD boot address and size are assigned in terms of sector * offset and no. of sectors respectively. */ #define CONFIG_BS_HDR_ADDR_DEVICE 0x00000800 #define CONFIG_BS_ADDR_DEVICE 0x00000840 #define CONFIG_BS_HDR_SIZE 0x00000010 #define CONFIG_BS_SIZE 0x00000008 -#else +/* ifdef CONFIG_SD_BOOT */ +#elif defined(CONFIG_QSPI_BOOT) +#define CONFIG_BS_HDR_ADDR_DEVICE 0x40780000 +#define CONFIG_BS_ADDR_DEVICE 0x40800000 +#define CONFIG_BS_HDR_SIZE 0x00002000 +#define CONFIG_BS_SIZE 0x00001000 +#else /* elif defined(CONFIG_QSPI_BOOT) */ #define CONFIG_BS_HDR_ADDR_DEVICE 0x600a0000 #define CONFIG_BS_ADDR_DEVICE 0x60060000 #define CONFIG_BS_HDR_SIZE 0x00002000 #define CONFIG_BS_SIZE 0x00001000 -#endif /* #ifdef CONFIG_SD_BOOT */ +#endif /* Default NOR Boot */ #define CONFIG_BS_HDR_ADDR_RAM 0x81000000 #define CONFIG_BS_ADDR_RAM 0x81020000 #endif @@ -125,12 +137,15 @@ #ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP #ifdef CONFIG_LS1043A #define CONFIG_SYS_LS_PPA_ESBC_ADDR 0x600c0000 +#elif defined(CONFIG_LS1046A) +#define CONFIG_SYS_LS_PPA_ESBC_ADDR 0x40740000 #endif #else #error "No CONFIG_SYS_LS_PPA_FW_IN_xxx defined" #endif /* ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP */
-/* Define the key hash here if SRK used for signing PPA image is +/* + * Define the key hash here if SRK used for signing PPA image is * different from SRK hash put in SFP used for U-Boot. * Example * #define CONFIG_PPA_KEY_HASH \