When Kconfig PHY_ETHERNET_ID is set, create external PHY using via ethernet-phy-id driver to support using strapping resistors of the external PHY.
Fixes: a744a284e354 ("net: phy: Add support for ethernet-phy-id with gpio reset") Signed-off-by: Tapio Reijonen tapio.reijonen@vaisala.com ---
Changes in v2: - Fixing inside 80 chars per line
--- drivers/net/phy/xilinx_gmii2rgmii.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/xilinx_gmii2rgmii.c b/drivers/net/phy/xilinx_gmii2rgmii.c index e44b7b75bd58..d860f4c37856 100644 --- a/drivers/net/phy/xilinx_gmii2rgmii.c +++ b/drivers/net/phy/xilinx_gmii2rgmii.c @@ -18,7 +18,7 @@ DECLARE_GLOBAL_DATA_PTR; static int xilinxgmiitorgmii_config(struct phy_device *phydev) { ofnode node = phy_get_ofnode(phydev); - struct phy_device *ext_phydev; + struct phy_device *ext_phydev = NULL; struct ofnode_phandle_args phandle; int ext_phyaddr = -1; int ret; @@ -40,8 +40,14 @@ static int xilinxgmiitorgmii_config(struct phy_device *phydev) return ret;
ext_phyaddr = ofnode_read_u32_default(phandle.node, "reg", -1); - ext_phydev = phy_find_by_mask(phydev->bus, - 1 << ext_phyaddr); + + if (IS_ENABLED(CONFIG_PHY_ETHERNET_ID)) + ext_phydev = phy_connect_phy_id(phydev->bus, phydev->dev, + ext_phyaddr); + + if (!ext_phydev) + ext_phydev = phy_find_by_mask(phydev->bus, + 1 << ext_phyaddr); if (!ext_phydev) { printf("%s, No external phy device found\n", __func__); return -EINVAL;