Hi!
I have a bsp with a patched u-boot Version 1.1.4. The board has nor and nand chip, both via spi. I have been able to access nor, but struggle with the spi nand. I have admittedly not much experience with nand device drivers and u-boot in that matter, but some understanding of linux kernel. I also have a functioning linux kernel driver for the spi nand.
My question: Since the internal structure of u-boot has changed significantly from 1.1.4 to today, what would be the best way to approach this. I read some mails on the mailing list from 2015 where it was discussed to support spi nand like spi nor within sf functionality. Can someone point to a spi nand driver implementation or tell me, what the driver would have to look like?!
Thanks and Regards,
Matthias
Dr.-Ing. Matthias Schöpfer | i-THINx GmbH | Software Engineer Phone: +49 (221) 99589-332 | Fax: +49 (221) 99589-199 Address: i-THINx GmbH | Butzweilerhof Allee 4 | 50829 Cologne | Germany E-Mail: Matthias.Schoepfer@i-thinx.com | Website: www.i-thinx.com Registered Office: Cologne | District court: Marburg | HRB 6749 Managing Director: Christian Faust
This e-mail may contain confidential and/or privileged information. if you are not the intended recipient (or have received this e-mail in error) please notifiy the sender immediately and destroy this e-mail. Any unautohrized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
We like trees. Please consider the environment before printing this e-mail. Thank you.