[U-Boot-Users] Board HW ID

Hello,

I've put a re-compiled u-boot on a tqm823 module. This wiped over the serial number and ethernet MAC address on the module. Re-setting the ethaddr is no problem as it is printed on the back of the module.

I imagine I can do likewise for the serial number.

What about HW ID? Here is part of the u-boot boot-up message:

CPU: PPC823EZTnnB2 at 50 MHz: 16 kB I-Cache 8 kB D-Cache Board: ### No HW ID - assuming TQM8xxL

I would like to set u-boot/include/configs/TQM823L_myversion.h such that the Hardware ID gets set correctly. Can anyone tell me how?

Many thanks

Seb James.