The 'board_som_rev' environment variable will be used to point correct configuration from the Linux FIT file.
Signed-off-by: Lukasz Majewski lukma@denx.de ---
board/liebherr/xea/xea.c | 12 ++++++++++++ configs/imx28_xea_defconfig | 1 + configs/imx28_xea_sb_defconfig | 1 + 3 files changed, 14 insertions(+)
diff --git a/board/liebherr/xea/xea.c b/board/liebherr/xea/xea.c index d9cf27c81b..90a1e03077 100644 --- a/board/liebherr/xea/xea.c +++ b/board/liebherr/xea/xea.c @@ -282,6 +282,18 @@ int board_init(void) return 0; }
+#if defined(CONFIG_BOARD_LATE_INIT) +int board_late_init(void) +{ + int ret = env_set_ulong("board_som_rev", get_som_rev()); + + if (ret) + printf("Cannot set XEA's SoM revision env variable!\n"); + + return 0; +} +#endif + int dram_init(void) { return mxs_dram_init(); diff --git a/configs/imx28_xea_defconfig b/configs/imx28_xea_defconfig index 64a0561a34..6098c1f3be 100644 --- a/configs/imx28_xea_defconfig +++ b/configs/imx28_xea_defconfig @@ -39,6 +39,7 @@ CONFIG_BOOTCOMMAND="run ${bootpri} ; run ${bootsec}" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="run prebootcmd" CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set diff --git a/configs/imx28_xea_sb_defconfig b/configs/imx28_xea_sb_defconfig index 9872d35c1b..8d48d8c507 100644 --- a/configs/imx28_xea_sb_defconfig +++ b/configs/imx28_xea_sb_defconfig @@ -23,6 +23,7 @@ CONFIG_BOOTARGS="console=ttyAMA0,115200n8" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="run prebootcmd" CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_BOARD_LATE_INIT=y # CONFIG_SPL_FRAMEWORK is not set CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y