This patch series add uboot ti qspi controller driver.
QSPI is a kind of spi module that allows single, dual and quad read access to external spi devices. The module has a memory mapped interface which provide direct interface for accessing data form external spi devices.
SPI mode ------- SPI mode uses mtd spi framework for transfer and reception of data. Can be used in: 1. Normal mode: use single pin for transfers 2. Dual Mode: use two pins for transfers. 3. Quad mode: use four pin for transfer
Memory mapped read mode ----------------------- In this, SPI controller is configured using configuration port and then controler is switched to memory mapped port for data read.
Series proposed suport for quad read as well as memory mapped read in spi mtd frameowrk as well as ti qpsi driver.
Test info is attached as the last patch in the series.
Matt Porter (3): omap5: add qspi support spi: add TI QSPI driver dra7xx_evm: add SPL API, QSPI, and serial flash support
Ravikumar Kattekola (1): drivers: mtd: qspi: Add quad read support
Sourav Poddar (4): armv7: hw_data: change clock divider setting. drivers: mtd: spi: Modify read/write command for sfl256s flash. driver: spi: Add memory mapped read support README: qspi usecase and testing documentation.
arch/arm/cpu/armv7/omap5/hw_data.c | 9 +- arch/arm/cpu/armv7/omap5/prcm-regs.c | 1 + arch/arm/include/asm/arch-omap5/omap.h | 3 + arch/arm/include/asm/arch-omap5/spl.h | 1 + arch/arm/include/asm/omap_common.h | 1 + board/ti/dra7xx/mux_data.h | 10 + doc/README.ti_qspi_dra_test | 38 ++++ doc/README.ti_qspi_flash | 47 +++++ drivers/mtd/spi/spansion.c | 1 + drivers/mtd/spi/spi_flash.c | 148 ++++++++++++++- drivers/mtd/spi/spi_flash_internal.h | 2 + drivers/spi/Makefile | 1 + drivers/spi/ti_qspi.c | 327 ++++++++++++++++++++++++++++++++ include/configs/dra7xx_evm.h | 19 ++ include/spi.h | 5 + 15 files changed, 610 insertions(+), 3 deletions(-) create mode 100644 doc/README.ti_qspi_dra_test create mode 100644 doc/README.ti_qspi_flash create mode 100644 drivers/spi/ti_qspi.c