Add support for getting the 'vref-supply' regulator and register it as ADC's reference voltage regulator, so clients can translate sampled ADC values to the voltage.
Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com --- drivers/adc/meson-saradc.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/drivers/adc/meson-saradc.c b/drivers/adc/meson-saradc.c index 21db55831d..1a45a3a265 100644 --- a/drivers/adc/meson-saradc.c +++ b/drivers/adc/meson-saradc.c @@ -18,6 +18,7 @@ #include <linux/delay.h> #include <linux/math64.h> #include <linux/bitfield.h> +#include <power/regulator.h>
#define MESON_SAR_ADC_REG0 0x00 #define MESON_SAR_ADC_REG0_PANEL_DETECT BIT(31) @@ -656,7 +657,10 @@ static int meson_saradc_stop(struct udevice *dev)
static int meson_saradc_probe(struct udevice *dev) { + struct adc_uclass_plat *uc_pdata = dev_get_uclass_plat(dev); struct meson_saradc_priv *priv = dev_get_priv(dev); + struct udevice *vref; + int vref_uv; int ret;
ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap); @@ -675,6 +679,23 @@ static int meson_saradc_probe(struct udevice *dev)
priv->active_channel = -1;
+ ret = device_get_supply_regulator(dev, "vref-supply", &vref); + if (ret) { + printf("can't get vref-supply: %d\n", ret); + return ret; + } + + vref_uv = regulator_get_value(vref); + if (vref_uv < 0) { + printf("can't get vref-supply value: %d\n", vref_uv); + return vref_uv; + } + + /* VDD supplied by common vref pin */ + uc_pdata->vdd_supply = vref; + uc_pdata->vdd_microvolts = vref_uv; + uc_pdata->vss_microvolts = 0; + return 0; }