Wolfgang Denk wrote:
In message 4062A3C1.40107@staubli.com you wrote:
On my side, I had the timeouts problems on tftp transferts from the begining. IDE support didn't change anything, the problem exists before.
It would be interesting to know if there were some components in your setup that you were not able to replace:
LITE5200 board network cable(s) switch(es) / hub(s) TFTP server
I've made some tests with several tftp servers (Unix servers and PC servers). Of course, I've tried several cables and severals ports on several switches. I've also made some tests with a direct connection between a PC and my Lite5200 with same results (in this case, timeouts are rare, but it happens sometimes). Unfortunately, I've got only one Lite5200 board but other people have same problems (see thread http://sourceforge.net/mailarchive/forum.php?thread_id=4080201&forum_id=...) I think that my board is OK because I don't have any problem with the FEC under my operating system.
Only if you were able to replace each of them, and the problem persisted, I am convinced of a problem with the code.
We had several boards, both with MGT5100 and MPC5200, with SDRAM and DDR, in several layour versions of the IceCube / LITE board, and additionally some custom boards. Never had that sort of problem until around the time the IDE stuff was checked in.
Best regards,
Wolfgang Denk
Best regards