Dear Wolfgang,
In message pink sez,
So still doing some hacking trying to build this and wondering if either u-boot-1.3.4 is busted, or the instructions are wrong.
v1.3.4 is old. Why don't you use current code?
Far as I can tell v1.3.4 is from Sept this year. Is it older than that?
Note sure it it works or not. When I run it I get the following error.
Cannot parse config file: No such file or directory
Obviously you have to create a config file in your target file system...
I'm sorry I should have done a little more poking about before I posted that. I put fw_env.config in /etc and changed the entry to and at least
/dev/mtd1 0xe000 0x2000 0x2000 #/dev/mtd1 0xe000 0x2000 0x2000
Then created device nodes.
mknod /dev/mtd0 c 90 0 mknod /dev/mtd1 c 90 1
After that fw_printenv works. However fw_setenv returns an error.
# ./fw_setenv beets are_good Can't open /dev/mtd1: Permission denied Error: can't write fw_env to flash
It's probably something stupid on my part. But at least I got this far.
Would using the latest tree be better? It appears at least that make at91rm9200dk_config make env
doesn't work because fw_printenv needs some kernel headers to build correctly.
Mr Foo