Re: [U-Boot-Users] Booting U-Boot from tftp

In message 20041029121201.42802.qmail@web25009.mail.ukl.yahoo.com you wrote:

None taken and you're right about that, of course. However, if it's not too difficult could you tell me how?

It does not work for the purpose you intend to iuse it, so it's jusrt a waste of time - yours and mine.

I could also use a debugger to load u-boot. I tried doing the following after a piece of advice on the ppcboot mailing list (google for ppcboot +riscwatch):

No. Get a real debugger. Get a BDI2000.

• change config/WALNUT405.h CFG_FLASH_BASE (and

CFG_MONITOR_BASE) to (ADDR_IN_RAM)

You don't want to do that. Build U-Boot as it is configured, and use this.

Best regards,

Wolfgang Denk