From: Thierry Reding treding@nvidia.com
The PCIe bus on Cardhu is routed to the dock connector. An ethernet NIC is available on the dock over the PCIe bus. Enable the PCIe controller and the network device driver so that the device can boot over the network.
Signed-off-by: Thierry Reding treding@nvidia.com --- Changes in v2: - write to instead of read from the LDO2_REG register to enable LDO2 - use proper set of PCIe power supplies - use unit address in node name
arch/arm/dts/tegra30-cardhu.dts | 362 ++++++++++++++++++++++++++++++++++++++++ board/nvidia/cardhu/cardhu.c | 56 +++++++ include/configs/cardhu.h | 10 ++ 3 files changed, 428 insertions(+)
diff --git a/arch/arm/dts/tegra30-cardhu.dts b/arch/arm/dts/tegra30-cardhu.dts index ea2cf76ff3a8..54e08f59da12 100644 --- a/arch/arm/dts/tegra30-cardhu.dts +++ b/arch/arm/dts/tegra30-cardhu.dts @@ -22,6 +22,31 @@ reg = <0x80000000 0x40000000>; };
+ pcie-controller@00003000 { + status = "okay"; + + /* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */ + avdd-pexb-supply = <&ldo1_reg>; + vdd-pexb-supply = <&ldo1_reg>; + avdd-pex-pll-supply = <&ldo1_reg>; + hvdd-pex-supply = <&pex_hvdd_3v3_reg>; + vddio-pex-ctl-supply = <&sys_3v3_reg>; + avdd-plle-supply = <&ldo2_reg>; + + pci@1,0 { + nvidia,num-lanes = <4>; + }; + + pci@2,0 { + nvidia,num-lanes = <1>; + }; + + pci@3,0 { + status = "okay"; + nvidia,num-lanes = <1>; + }; + }; + i2c@7000c000 { status = "okay"; clock-frequency = <100000>; @@ -45,6 +70,107 @@ i2c@7000d000 { status = "okay"; clock-frequency = <100000>; + + pmic: tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&vdd_ac_bat_reg>; + vcc2-supply = <&vdd_ac_bat_reg>; + vcc3-supply = <&vio_reg>; + vcc4-supply = <&vdd_5v0_reg>; + vcc5-supply = <&vdd_ac_bat_reg>; + vcc6-supply = <&vdd2_reg>; + vcc7-supply = <&vdd_ac_bat_reg>; + vccio-supply = <&vdd_ac_bat_reg>; + + regulators { + vdd1_reg: vdd1 { + regulator-name = "vddio_ddr_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd2_reg: vdd2 { + regulator-name = "vdd_1v5_gen"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vddctrl_reg: vddctrl { + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vio_reg: vio { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "vdd_pexa,vdd_pexb"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo2_reg: ldo2 { + regulator-name = "vdd_sata,avdd_plle"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + /* LDO3 is not connected to anything */ + + ldo4_reg: ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + regulator-name = "vddio_sdmmc,avdd_vdac"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-name = "avdd_dsi_csi,pwrdet_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo7_reg: ldo7 { + regulator-name = "vdd_pllm,x,u,a_p_c_s"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; };
spi@7000da00 { @@ -69,4 +195,240 @@ nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */ status = "okay"; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_ac_bat_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_ac_bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + cam_1v8_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "cam_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>; + vin-supply = <&vio_reg>; + }; + + cp_5v_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "cp_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; + }; + + emmc_3v3_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "emmc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + modem_3v3_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "modem_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>; + }; + + pex_hvdd_3v3_reg: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "pex_hvdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + vdd_cam1_ldo_reg: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "vdd_cam1_ldo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + vdd_cam2_ldo_reg: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "vdd_cam2_ldo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + vdd_cam3_ldo_reg: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "vdd_cam3_ldo"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + vdd_com_reg: regulator@9 { + compatible = "regulator-fixed"; + reg = <9>; + regulator-name = "vdd_com"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + vdd_fuse_3v3_reg: regulator@10 { + compatible = "regulator-fixed"; + reg = <10>; + regulator-name = "vdd_fuse_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + vdd_pnl1_reg: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + regulator-name = "vdd_pnl1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + vdd_vid_reg: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "vddio_vid"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + + ddr_reg: regulator@100 { + compatible = "regulator-fixed"; + regulator-name = "ddr"; + reg = <100>; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; + }; + + sys_3v3_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "sys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + }; + + usb1_vbus_reg: regulator@102 { + compatible = "regulator-fixed"; + reg = <102>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + + usb3_vbus_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; + regulator-name = "usb3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + + vdd_5v0_reg: regulator@104 { + compatible = "regulator-fixed"; + reg = <104>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pmic 8 GPIO_ACTIVE_HIGH>; + }; + + vdd_bl_reg: regulator@105 { + compatible = "regulator-fixed"; + reg = <105>; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>; + }; + + vdd_bl2_reg: regulator@106 { + compatible = "regulator-fixed"; + reg = <106>; + regulator-name = "vdd_bl2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>; + }; + }; }; diff --git a/board/nvidia/cardhu/cardhu.c b/board/nvidia/cardhu/cardhu.c index cc0e5e130fda..7893bc3db81c 100644 --- a/board/nvidia/cardhu/cardhu.c +++ b/board/nvidia/cardhu/cardhu.c @@ -8,8 +8,11 @@ #include <common.h> #include <asm/arch/pinmux.h> #include <asm/arch/gp_padctrl.h> +#include <asm/arch/gpio.h> +#include <asm/gpio.h> #include "pinmux-config-cardhu.h" #include <i2c.h> +#include <netdev.h>
#define PMU_I2C_ADDRESS 0x2D #define MAX_I2C_RETRY 3 @@ -76,3 +79,56 @@ void pin_mux_mmc(void) board_sdmmc_voltage_init(); } #endif /* MMC */ + +#ifdef CONFIG_PCI_TEGRA +int tegra_pcie_board_init(void) +{ + unsigned int old_bus; + u8 addr, data[1]; + int err; + + old_bus = i2c_get_bus_num(); + + err = i2c_set_bus_num(0); + if (err) { + debug("failed to set I2C bus\n"); + return err; + } + + /* TPS659110: LDO1_REG = 1.05V, ACTIVE */ + data[0] = 0x15; + addr = 0x30; + + err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1); + if (err) { + debug("failed to set VDD supply\n"); + return err; + } + + /* GPIO: PEX = 3.3V */ + err = gpio_request(GPIO_PL7, "PEX"); + if (err < 0) + return err; + + gpio_direction_output(GPIO_PL7, 1); + + /* TPS659110: LDO2_REG = 1.05V, ACTIVE */ + data[0] = 0x15; + addr = 0x31; + + err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1); + if (err) { + debug("failed to set AVDD supply\n"); + return err; + } + + i2c_set_bus_num(old_bus); + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} +#endif /* PCI */ diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index 59f429cf5784..f5f4a860f6a9 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -88,6 +88,16 @@ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
+/* PCI host support */ +#define CONFIG_PCI +#define CONFIG_PCI_TEGRA +#define CONFIG_PCI_PNP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PCI_ENUM + +/* PCI networking support */ +#define CONFIG_RTL8169 + /* General networking support */ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP