This commit adds additional file with implementation of board detection code for Odroid-XU3/XU4.
The detection depends on compatible found in fdt: - "samsung,exynos5" - uses Exynos5 generic code - "samsung,odroidxu3" - try detect XU3 revision
There are few revisions of Odroid XU3/XU4, each can be detected by checking the value of channel 9 of built-in ADC: Rev ADC Board 0.1 0 XU3 0.1 0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT 0.3 1280 XU4 0.1
The detection code depends on the ADC+10% value.
Implementation of functions: - set_board_type() - read ADC and set type - get_board_rev() - returns board revision: 1..3 - get_board_type() - returns board type string
Additional functions with return values of bool: - board_is_generic() - true if found compatible "samsung,exynos5" but not "samsung,odroidxu3" - board_is_odroidxu3() - true if found compatible "samsung,odroidxu3" and one of XU3 revision. - board_is_odroidxu4() - true if found compatible "samsung,odroidxu3" and XU4 revision.
After I2C controller init, the get_board_type() can check if the XU3 board is a "Lite" variant, by probing chip 0x40 on I2C0 (INA231 - exists only on non-lite). This is useful for setting fdt file name at misc_init_r().
Enabled configs: - CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - CONFIG_ODROID_REV_AIN - CONFIG_REVISION_TAG - CONFIG_BOARD_TYPES
Signed-off-by: Przemyslaw Marczak p.marczak@samsung.com --- Changes V2: - move detection code from exynos5-dt.c to exynos5-dt-types.c - add header with board type function declarations - check for compatible before do the detection - update the ADC max values with 20% tolerance - fix XU4 adc value, related to mistake from table in XU4 schematic - return "Not supported" for XU4 when calls one of: --dfu_get_alt_boot() --dfu_get_alt_system() - extend ${dfu_alt_system} by strings: -- 'exynos5422-odroidxu3-lite.dtb' -- 'exynos5422-odroidxu4.dtb' - allows prepare card on XU3 --- board/samsung/common/Makefile | 5 +- board/samsung/common/exynos5-dt-types.c | 196 ++++++++++++++++++++++++++++++++ board/samsung/common/exynos5-dt.c | 12 ++ configs/odroid-xu3_defconfig | 2 + include/configs/odroid_xu3.h | 12 ++ include/samsung/exynos5-dt-types.h | 27 +++++ 6 files changed, 253 insertions(+), 1 deletion(-) create mode 100644 board/samsung/common/exynos5-dt-types.c create mode 100644 include/samsung/exynos5-dt-types.h
diff --git a/board/samsung/common/Makefile b/board/samsung/common/Makefile index 6cbd906..ef1a8f3 100644 --- a/board/samsung/common/Makefile +++ b/board/samsung/common/Makefile @@ -11,5 +11,8 @@ obj-$(CONFIG_MISC_COMMON) += misc.o
ifndef CONFIG_SPL_BUILD obj-$(CONFIG_BOARD_COMMON) += board.o -obj-$(CONFIG_EXYNOS5_DT) += exynos5-dt.o +ifdef CONFIG_EXYNOS5_DT +obj-y += exynos5-dt.o +obj-$(CONFIG_BOARD_TYPES) += exynos5-dt-types.o +endif endif diff --git a/board/samsung/common/exynos5-dt-types.c b/board/samsung/common/exynos5-dt-types.c new file mode 100644 index 0000000..1364e98 --- /dev/null +++ b/board/samsung/common/exynos5-dt-types.c @@ -0,0 +1,196 @@ +/* + * Copyright (C) 2015 Samsung Electronics + * Przemyslaw Marczak p.marczak@samsung.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <adc.h> +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <fdtdec.h> +#include <power/pmic.h> +#include <power/regulator.h> +#include <power/s2mps11.h> +#include <samsung/exynos5-dt-types.h> +#include <samsung/misc.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const struct udevice_id board_ids[] = { + { .compatible = "samsung,odroidxu3", .data = EXYNOS5_BOARD_ODROID_XU3 }, + { .compatible = "samsung,exynos5", .data = EXYNOS5_BOARD_GENERIC }, + { }, +}; + +/** + * Odroix XU3/4 board revisions: + * Rev ADCmax Board + * 0.1 0 XU3 0.1 + * 0.2 410 XU3 0.2 | XU3L - no DISPLAYPORT (probe I2C0:0x40 / INA231) + * 0.3 1408 XU4 0.1 + * Use +10 % for ADC value tolerance. + */ +struct odroid_rev_info odroid_info[] = { + { EXYNOS5_BOARD_ODROID_XU3_REV01, 1, 10, "xu3" }, + { EXYNOS5_BOARD_ODROID_XU3_REV02, 2, 410, "xu3" }, + { EXYNOS5_BOARD_ODROID_XU4_REV01, 1, 1408, "xu4" }, + { EXYNOS5_BOARD_ODROID_UNKNOWN, 0, 4095, "unknown" }, +}; + +static unsigned int odroid_get_rev(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(odroid_info); i++) { + if (odroid_info[i].board_type == gd->board_type) + return odroid_info[i].board_rev; + } + + return 0; +} + +static int odroid_get_board_type(void) +{ + unsigned int adcval; + int ret, i; + + ret = adc_channel_single_shot("adc", CONFIG_ODROID_REV_AIN, &adcval); + if (ret) + goto rev_default; + + for (i = 0; i < ARRAY_SIZE(odroid_info); i++) { + /* ADC tolerance: +20 % */ + if (adcval < odroid_info[i].adc_val) + return odroid_info[i].board_type; + } + +rev_default: + return EXYNOS5_BOARD_ODROID_XU3; +} + +/** + * odroid_get_type_str - returns pointer to one of the board type string. + * Board types: "xu3", "xu3-lite", "xu4". However the "xu3lite" can be + * detected only when the i2c controller is ready to use. Fortunately, + * XU3 and XU3L are compatible, and the information about board lite + * revision is needed before booting the linux, to set proper environment + * variable: $fdtfile. + */ +static const char *odroid_get_type_str(void) +{ + const char *type_xu3l = "xu3-lite"; + struct udevice *dev, *chip; + int i, ret; + + if (gd->board_type != EXYNOS5_BOARD_ODROID_XU3_REV02) + goto exit; + + ret = pmic_get("s2mps11", &dev); + if (ret) + goto exit; + + /* Enable LDO26: 3.0V */ + ret = pmic_reg_write(dev, S2MPS11_REG_L26CTRL, + S2MPS11_LDO26_ENABLE); + if (ret) + goto exit; + + /* Check XU3Lite by probe INA231 I2C0:0x40 */ + ret = uclass_get_device(UCLASS_I2C, 0, &dev); + if (ret) + goto exit; + + ret = dm_i2c_probe(dev, 0x40, 0x0, &chip); + if (ret) + return type_xu3l; + +exit: + for (i = 0; i < ARRAY_SIZE(odroid_info); i++) { + if (odroid_info[i].board_type == gd->board_type) + return odroid_info[i].name; + } + + return NULL; +} + +bool board_is_odroidxu3(void) +{ + if (gd->board_type >= EXYNOS5_BOARD_ODROID_XU3 && + gd->board_type <= EXYNOS5_BOARD_ODROID_XU3_REV02) + return true; + + return false; +} + +bool board_is_odroidxu4(void) +{ + if (gd->board_type == EXYNOS5_BOARD_ODROID_XU4_REV01) + return true; + + return false; +} + +bool board_is_generic(void) +{ + if (gd->board_type == EXYNOS5_BOARD_GENERIC) + return true; + + return false; +} + +/** + * get_board_rev() - return detected board revision. + * + * @return: return board revision number for XU3 or 0 for generic + */ +u32 get_board_rev(void) +{ + if (board_is_generic()) + return 0; + + return odroid_get_rev(); +} + +/** + * get_board_type() - returns board type string. + * + * @return: return board type string for XU3 or empty string for generic + */ +const char *get_board_type(void) +{ + const char *generic = ""; + + if (board_is_generic()) + return generic; + + return odroid_get_type_str(); +} + +/** + * set_board_type() - set board type in gd->board_type. + * As default type set EXYNOS5_BOARD_GENERIC, if detect Odroid, + * then set it's proper type. + */ +void set_board_type(void) +{ + const struct udevice_id *of_match = board_ids; + int ret; + + gd->board_type = EXYNOS5_BOARD_GENERIC; + + while (of_match->compatible) { + ret = fdt_node_check_compatible(gd->fdt_blob, 0, + of_match->compatible); + if (ret) + of_match++; + + gd->board_type = of_match->data; + break; + } + + /* If Odroid, then check it's revision */ + if (board_is_odroidxu3()) + gd->board_type = odroid_get_board_type(); +} diff --git a/board/samsung/common/exynos5-dt.c b/board/samsung/common/exynos5-dt.c index 4250f72..4d9e151 100644 --- a/board/samsung/common/exynos5-dt.c +++ b/board/samsung/common/exynos5-dt.c @@ -27,7 +27,10 @@ #include <power/pmic.h> #include <power/max77686_pmic.h> #include <power/regulator.h> +#include <power/s2mps11.h> #include <power/s5m8767.h> +#include <samsung/exynos5-dt-types.h> +#include <samsung/misc.h> #include <tmu.h>
DECLARE_GLOBAL_DATA_PTR; @@ -335,15 +338,24 @@ int board_usb_init(int index, enum usb_init_type init) #ifdef CONFIG_SET_DFU_ALT_INFO char *get_dfu_alt_system(char *interface, char *devstr) { + char *info = "Not supported!"; + + if (board_is_odroidxu4()) + return info; + return getenv("dfu_alt_system"); }
char *get_dfu_alt_boot(char *interface, char *devstr) { + char *info = "Not supported!"; struct mmc *mmc; char *alt_boot; int dev_num;
+ if (board_is_odroidxu4()) + return info; + dev_num = simple_strtoul(devstr, NULL, 10);
mmc = find_mmc_device(dev_num); diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig index f38c37b..d7e5698 100644 --- a/configs/odroid-xu3_defconfig +++ b/configs/odroid-xu3_defconfig @@ -16,3 +16,5 @@ CONFIG_VIDEO_BRIDGE=y CONFIG_SYS_PROMPT="ODROID-XU3 # " CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_ADC=y +CONFIG_ADC_EXYNOS=y diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 3c70158..648e48b 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -94,6 +94,8 @@ "boot.scr fat 0 1;" \ "boot.cmd fat 0 1;" \ "exynos5422-odroidxu3.dtb fat 0 1;" \ + "exynos5422-odroidxu3-lite.dtb fat 0 1;" \ + "exynos5422-odroidxu4.dtb fat 0 1;" \ "boot part 0 1;" \ "root part 0 2\0"
@@ -113,9 +115,19 @@
/* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */ #define CONFIG_MISC_COMMON +#define CONFIG_MISC_INIT_R #define CONFIG_SET_DFU_ALT_INFO #define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K)
+/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */ +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#define CONFIG_ODROID_REV_AIN 9 +#define CONFIG_REVISION_TAG +#define CONFIG_BOARD_TYPES + +#undef CONFIG_SYS_BOARD +#define CONFIG_SYS_BOARD "odroid" + /* Define new extra env settings, including DFU settings */ #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/samsung/exynos5-dt-types.h b/include/samsung/exynos5-dt-types.h new file mode 100644 index 0000000..479e2e7 --- /dev/null +++ b/include/samsung/exynos5-dt-types.h @@ -0,0 +1,27 @@ +#ifndef _EXYNOS5_DT_H_ +#define _EXYNOS5_DT_H_ + +enum { + EXYNOS5_BOARD_GENERIC, + + EXYNOS5_BOARD_ODROID_XU3, + EXYNOS5_BOARD_ODROID_XU3_REV01, + EXYNOS5_BOARD_ODROID_XU3_REV02, + EXYNOS5_BOARD_ODROID_XU4_REV01, + EXYNOS5_BOARD_ODROID_UNKNOWN, + + EXYNOS5_BOARD_COUNT, +}; + +struct odroid_rev_info { + int board_type; + int board_rev; + int adc_val; + const char *name; +}; + +bool board_is_generic(void); +bool board_is_odroidxu3(void); +bool board_is_odroidxu4(void); + +#endif