[U-Boot] [PATCH] config: consolidate CONFIG_SYS_HZ definition

8 Sep 2013

From: Rob Herring rob.herring@calxeda.com
According to the README, CONFIG_SYS_HZ must be 1000 and most platforms
follow that. Remove CONFIG_SYS_HZ from all these platforms and provide
a default definition.
The platforms which use a value other than 1000 are untouched.
Signed-off-by: Rob Herring rob.herring@calxeda.com
---
 arch/arm/include/asm/arch-lpc32xx/config.h | 3 ---
 include/config_fallbacks.h                 | 4 ++++
 include/configs/A3000.h                    | 1 -
 include/configs/AR405.h                    | 2 --
 include/configs/ASH405.h                   | 2 --
 include/configs/Adder.h                    | 2 --
 include/configs/B4860QDS.h                 | 1 -
 include/configs/BC3450.h                   | 2 --
 include/configs/BSC9131RDB.h               | 1 -
 include/configs/BSC9132QDS.h               | 1 -
 include/configs/C29XPCIE.h                 | 1 -
 include/configs/CATcenter.h                | 2 --
 include/configs/CMS700.h                   | 2 --
 include/configs/CPC45.h                    | 1 -
 include/configs/CPCI2DP.h                  | 2 --
 include/configs/CPCI405.h                  | 2 --
 include/configs/CPCI4052.h                 | 2 --
 include/configs/CPCI405AB.h                | 2 --
 include/configs/CPCI405DT.h                | 2 --
 include/configs/CPCI750.h                  | 1 -
 include/configs/CPCIISER4.h                | 2 --
 include/configs/CPU87.h                    | 2 --
 include/configs/CU824.h                    | 1 -
 include/configs/DB64360.h                  | 1 -
 include/configs/DB64460.h                  | 1 -
 include/configs/DP405.h                    | 2 --
 include/configs/DU405.h                    | 2 --
 include/configs/DU440.h                    | 2 --
 include/configs/ELPPC.h                    | 2 --
 include/configs/ELPT860.h                  | 2 --
 include/configs/EP88x.h                    | 2 --
 include/configs/FLAGADM.h                  | 2 --
 include/configs/G2000.h                    | 2 --
 include/configs/GEN860T.h                  | 5 -----
 include/configs/HIDDEN_DRAGON.h            | 1 -
 include/configs/HUB405.h                   | 2 --
 include/configs/HWW1U1A.h                  | 2 --
 include/configs/IPHASE4539.h               | 2 --
 include/configs/ISPAN.h                    | 2 --
 include/configs/IceCube.h                  | 2 --
 include/configs/JSE.h                      | 2 --
 include/configs/KUP4K.h                    | 2 --
 include/configs/KUP4X.h                    | 2 --
 include/configs/M5208EVBE.h                | 1 -
 include/configs/M52277EVB.h                | 2 --
 include/configs/M5235EVB.h                 | 1 -
 include/configs/M5249EVB.h                 | 2 --
 include/configs/M5253DEMO.h                | 2 --
 include/configs/M5253EVBE.h                | 2 --
 include/configs/M5272C3.h                  | 1 -
 include/configs/M5275EVB.h                 | 1 -
 include/configs/M5282EVB.h                 | 1 -
 include/configs/M53017EVB.h                | 1 -
 include/configs/M5329EVB.h                 | 1 -
 include/configs/M5373EVB.h                 | 1 -
 include/configs/M54418TWR.h                | 2 --
 include/configs/M54451EVB.h                | 2 --
 include/configs/M54455EVB.h                | 2 --
 include/configs/M5475EVB.h                 | 1 -
 include/configs/M5485EVB.h                 | 1 -
 include/configs/MBX.h                      | 2 --
 include/configs/MERGERBOX.h                | 1 -
 include/configs/MHPC.h                     | 2 --
 include/configs/MIP405.h                   | 2 --
 include/configs/MOUSSE.h                   | 1 -
 include/configs/MPC8260ADS.h               | 2 --
 include/configs/MPC8266ADS.h               | 2 --
 include/configs/MPC8308RDB.h               | 1 -
 include/configs/MPC8313ERDB.h              | 1 -
 include/configs/MPC8315ERDB.h              | 1 -
 include/configs/MPC8323ERDB.h              | 1 -
 include/configs/MPC832XEMDS.h              | 1 -
 include/configs/MPC8349EMDS.h              | 1 -
 include/configs/MPC8349ITX.h               | 1 -
 include/configs/MPC8360EMDS.h              | 1 -
 include/configs/MPC8360ERDK.h              | 1 -
 include/configs/MPC837XEMDS.h              | 1 -
 include/configs/MPC837XERDB.h              | 1 -
 include/configs/MPC8536DS.h                | 1 -
 include/configs/MPC8540ADS.h               | 1 -
 include/configs/MPC8541CDS.h               | 1 -
 include/configs/MPC8544DS.h                | 1 -
 include/configs/MPC8548CDS.h               | 1 -
 include/configs/MPC8555CDS.h               | 1 -
 include/configs/MPC8560ADS.h               | 1 -
 include/configs/MPC8568MDS.h               | 1 -
 include/configs/MPC8569MDS.h               | 1 -
 include/configs/MPC8572DS.h                | 1 -
 include/configs/MPC8610HPCD.h              | 1 -
 include/configs/MPC8641HPCN.h              | 1 -
 include/configs/MUSENKI.h                  | 1 -
 include/configs/MVBC_P.h                   | 2 --
 include/configs/MVBLM7.h                   | 1 -
 include/configs/MVSMR.h                    | 2 --
 include/configs/MigoR.h                    | 1 -
 include/configs/NX823.h                    | 2 --
 include/configs/OCRTC.h                    | 2 --
 include/configs/ORSG.h                     | 2 --
 include/configs/P1010RDB.h                 | 1 -
 include/configs/P1022DS.h                  | 1 -
 include/configs/P1023RDB.h                 | 1 -
 include/configs/P1023RDS.h                 | 1 -
 include/configs/P1_P2_RDB.h                | 1 -
 include/configs/P2020COME.h                | 1 -
 include/configs/P2020DS.h                  | 1 -
 include/configs/P2041RDB.h                 | 1 -
 include/configs/PCI405.h                   | 2 --
 include/configs/PCI5441.h                  | 1 -
 include/configs/PIP405.h                   | 2 --
 include/configs/PK1C20.h                   | 1 -
 include/configs/PLU405.h                   | 2 --
 include/configs/PM520.h                    | 2 --
 include/configs/PM828.h                    | 2 --
 include/configs/PMC405.h                   | 2 --
 include/configs/PMC405DE.h                 | 2 --
 include/configs/PMC440.h                   | 2 --
 include/configs/PN62.h                     | 1 -
 include/configs/PPChameleonEVB.h           | 2 --
 include/configs/QS823.h                    | 2 --
 include/configs/QS850.h                    | 2 --
 include/configs/QS860T.h                   | 2 --
 include/configs/RPXlite_DW.h               | 2 --
 include/configs/RPXsuper.h                 | 1 -
 include/configs/Rattler.h                  | 2 --
 include/configs/SIMPC8313.h                | 1 -
 include/configs/Sandpoint8240.h            | 1 -
 include/configs/Sandpoint8245.h            | 1 -
 include/configs/TASREG.h                   | 2 --
 include/configs/TB5200.h                   | 2 --
 include/configs/TK885D.h                   | 2 --
 include/configs/TOP5200.h                  | 2 --
 include/configs/TOP860.h                   | 1 -
 include/configs/TQM5200.h                  | 2 --
 include/configs/TQM834x.h                  | 1 -
 include/configs/TQM866M.h                  | 2 --
 include/configs/TQM885D.h                  | 2 --
 include/configs/Total5200.h                | 2 --
 include/configs/VCMA9.h                    | 1 -
 include/configs/VOH405.h                   | 2 --
 include/configs/VOM405.h                   | 2 --
 include/configs/VoVPN-GW.h                 | 1 -
 include/configs/W7OLMC.h                   | 2 --
 include/configs/W7OLMG.h                   | 2 --
 include/configs/WUH405.h                   | 2 --
 include/configs/ZPC1900.h                  | 2 --
 include/configs/ZUMA.h                     | 2 --
 include/configs/a320evb.h                  | 1 -
 include/configs/a3m071.h                   | 1 -
 include/configs/a4m072.h                   | 2 --
 include/configs/ac14xx.h                   | 3 ---
 include/configs/actux1.h                   | 1 -
 include/configs/actux2.h                   | 1 -
 include/configs/actux3.h                   | 1 -
 include/configs/actux4.h                   | 1 -
 include/configs/adp-ag101.h                | 6 ------
 include/configs/adp-ag101p.h               | 6 ------
 include/configs/adp-ag102.h                | 6 ------
 include/configs/aev.h                      | 2 --
 include/configs/afeb9260.h                 | 1 -
 include/configs/alpr.h                     | 2 --
 include/configs/am3517_crane.h             | 1 -
 include/configs/am3517_evm.h               | 1 -
 include/configs/am43xx_evm.h               | 1 -
 include/configs/amcc-common.h              | 2 --
 include/configs/ap325rxa.h                 | 1 -
 include/configs/ap_sh4a_4a.h               | 1 -
 include/configs/aria.h                     | 2 --
 include/configs/armadillo-800eva.h         | 1 -
 include/configs/astro_mcf5373l.h           | 2 --
 include/configs/at91rm9200ek.h             | 1 -
 include/configs/at91sam9260ek.h            | 1 -
 include/configs/at91sam9261ek.h            | 1 -
 include/configs/at91sam9263ek.h            | 1 -
 include/configs/at91sam9m10g45ek.h         | 1 -
 include/configs/at91sam9n12ek.h            | 1 -
 include/configs/at91sam9rlek.h             | 1 -
 include/configs/at91sam9x5ek.h             | 1 -
 include/configs/atngw100.h                 | 2 --
 include/configs/atngw100mkii.h             | 6 ------
 include/configs/atstk1002.h                | 6 ------
 include/configs/atstk1003.h                | 6 ------
 include/configs/atstk1004.h                | 6 ------
 include/configs/atstk1006.h                | 5 -----
 include/configs/calimain.h                 | 1 -
 include/configs/cam_enc_4xx.h              | 1 -
 include/configs/canmb.h                    | 2 --
 include/configs/cgtqmx6eval.h              | 1 -
 include/configs/cm4008.h                   | 2 --
 include/configs/cm41xx.h                   | 2 --
 include/configs/cm5200.h                   | 1 -
 include/configs/cm_t35.h                   | 1 -
 include/configs/cobra5272.h                | 2 --
 include/configs/controlcenterd.h           | 1 -
 include/configs/coreboot.h                 | 1 -
 include/configs/corenet_ds.h               | 1 -
 include/configs/cpci5200.h                 | 2 --
 include/configs/cpu9260.h                  | 1 -
 include/configs/cpuat91.h                  | 1 -
 include/configs/da830evm.h                 | 1 -
 include/configs/da850evm.h                 | 1 -
 include/configs/davinci_dm355evm.h         | 1 -
 include/configs/davinci_dm355leopard.h     | 1 -
 include/configs/davinci_dm365evm.h         | 1 -
 include/configs/davinci_dm6467evm.h        | 1 -
 include/configs/davinci_dvevm.h            | 1 -
 include/configs/davinci_schmoogie.h        | 1 -
 include/configs/davinci_sffsdr.h           | 1 -
 include/configs/davinci_sonata.h           | 1 -
 include/configs/dbau1x00.h                 | 2 --
 include/configs/debris.h                   | 1 -
 include/configs/devkit8000.h               | 1 -
 include/configs/dig297.h                   | 1 -
 include/configs/digsy_mtc.h                | 2 --
 include/configs/dvlhost.h                  | 1 -
 include/configs/eXalion.h                  | 1 -
 include/configs/ea20.h                     | 1 -
 include/configs/eb_cpu5282.h               | 1 -
 include/configs/eb_cpux9k2.h               | 1 -
 include/configs/ecovec.h                   | 1 -
 include/configs/edminiv2.h                 | 2 --
 include/configs/enbw_cmc.h                 | 1 -
 include/configs/ep8248.h                   | 2 --
 include/configs/ep8260.h                   | 2 --
 include/configs/ep82xxm.h                  | 2 --
 include/configs/espt.h                     | 1 -
 include/configs/ethernut5.h                | 1 -
 include/configs/exynos5250-dt.h            | 2 --
 include/configs/favr-32-ezkit.h            | 6 ------
 include/configs/flea3.h                    | 2 --
 include/configs/galaxy5200.h               | 1 -
 include/configs/gr_cpci_ax2000.h           | 2 --
 include/configs/gr_ep2s60.h                | 2 --
 include/configs/gr_xc3s_1500.h             | 2 --
 include/configs/grasshopper.h              | 6 ------
 include/configs/grsim.h                    | 2 --
 include/configs/grsim_leon2.h              | 2 --
 include/configs/gw8260.h                   | 1 -
 include/configs/h2200.h                    | 2 --
 include/configs/hammerhead.h               | 2 --
 include/configs/hawkboard.h                | 1 -
 include/configs/highbank.h                 | 2 --
 include/configs/hmi1001.h                  | 2 --
 include/configs/igep0033.h                 | 1 -
 include/configs/igep00x0.h                 | 1 -
 include/configs/ima3-mx53.h                | 1 -
 include/configs/imx27lite-common.h         | 1 -
 include/configs/imx31_litekit.h            | 2 --
 include/configs/imx31_phycore.h            | 2 --
 include/configs/incaip.h                   | 2 --
 include/configs/inka4x0.h                  | 2 --
 include/configs/integrator-common.h        | 1 -
 include/configs/ipam390.h                  | 1 -
 include/configs/ipek01.h                   | 1 -
 include/configs/jadecpu.h                  | 1 -
 include/configs/jornada.h                  | 1 -
 include/configs/jupiter.h                  | 2 --
 include/configs/km/keymile-common.h        | 2 --
 include/configs/korat.h                    | 2 --
 include/configs/kvme080.h                  | 1 -
 include/configs/kzm9g.h                    | 2 --
 include/configs/linkstation.h              | 1 -
 include/configs/lubbock.h                  | 1 -
 include/configs/lwmon.h                    | 2 --
 include/configs/lwmon5.h                   | 2 --
 include/configs/m53evk.h                   | 1 -
 include/configs/mcc200.h                   | 2 --
 include/configs/mcx.h                      | 1 -
 include/configs/mecp5123.h                 | 2 --
 include/configs/mecp5200.h                 | 2 --
 include/configs/meesc.h                    | 1 -
 include/configs/microblaze-generic.h       | 1 -
 include/configs/mimc200.h                  | 2 --
 include/configs/motionpro.h                | 2 --
 include/configs/mpc5121ads.h               | 1 -
 include/configs/mpc7448hpc2.h              | 2 --
 include/configs/mpc8308_p1m.h              | 1 -
 include/configs/mpq101.h                   | 1 -
 include/configs/mpr2.h                     | 1 -
 include/configs/ms7720se.h                 | 1 -
 include/configs/ms7722se.h                 | 1 -
 include/configs/ms7750se.h                 | 1 -
 include/configs/muas3001.h                 | 2 --
 include/configs/munices.h                  | 1 -
 include/configs/mv-common.h                | 1 -
 include/configs/mx1ads.h                   | 1 -
 include/configs/mx25pdk.h                  | 1 -
 include/configs/mx31ads.h                  | 2 --
 include/configs/mx31pdk.h                  | 2 --
 include/configs/mx35pdk.h                  | 2 --
 include/configs/mx51_efikamx.h             | 1 -
 include/configs/mx51evk.h                  | 1 -
 include/configs/mx53ard.h                  | 1 -
 include/configs/mx53evk.h                  | 1 -
 include/configs/mx53loco.h                 | 1 -
 include/configs/mx53smd.h                  | 1 -
 include/configs/mx6qarm2.h                 | 1 -
 include/configs/mx6sabre_common.h          | 1 -
 include/configs/mx6slevk.h                 | 1 -
 include/configs/mxs.h                      | 3 ---
 include/configs/nhk8815.h                  | 1 -
 include/configs/nios2-generic.h            | 1 -
 include/configs/nitrogen6x.h               | 1 -
 include/configs/nokia_rx51.h               | 1 -
 include/configs/o2dnt-common.h             | 1 -
 include/configs/omap1510inn.h              | 1 -
 include/configs/omap3_beagle.h             | 1 -
 include/configs/omap3_evm_common.h         | 1 -
 include/configs/omap3_logic.h              | 1 -
 include/configs/omap3_mvblx.h              | 1 -
 include/configs/omap3_overo.h              | 1 -
 include/configs/omap3_pandora.h            | 1 -
 include/configs/omap3_sdp3430.h            | 1 -
 include/configs/omap3_zoom1.h              | 1 -
 include/configs/omap4_common.h             | 1 -
 include/configs/omap5912osk.h              | 1 -
 include/configs/openrisc-generic.h         | 1 -
 include/configs/origen.h                   | 2 --
 include/configs/otc570.h                   | 1 -
 include/configs/p1_p2_rdb_pc.h             | 1 -
 include/configs/p1_twr.h                   | 1 -
 include/configs/p3mx.h                     | 2 --
 include/configs/p3p440.h                   | 2 --
 include/configs/palmtreo680.h              | 1 -
 include/configs/pb1x00.h                   | 2 --
 include/configs/pcm030.h                   | 1 -
 include/configs/pcm051.h                   | 1 -
 include/configs/pcs440ep.h                 | 2 --
 include/configs/pdm360ng.h                 | 1 -
 include/configs/pdnb3.h                    | 1 -
 include/configs/pf5200.h                   | 2 --
 include/configs/pm9261.h                   | 2 --
 include/configs/pm9263.h                   | 2 --
 include/configs/pm9g45.h                   | 1 -
 include/configs/ppmc7xx.h                  | 1 -
 include/configs/ppmc8260.h                 | 1 -
 include/configs/pxa255_idp.h               | 1 -
 include/configs/qemu-malta.h               | 1 -
 include/configs/qemu-mips.h                | 2 --
 include/configs/qemu-mips64.h              | 2 --
 include/configs/qong.h                     | 2 --
 include/configs/quad100hd.h                | 2 --
 include/configs/quantum.h                  | 2 --
 include/configs/r0p7734.h                  | 1 -
 include/configs/r2dplus.h                  | 1 -
 include/configs/r7780mp.h                  | 1 -
 include/configs/rpi_b.h                    | 3 ---
 include/configs/s5p_goni.h                 | 2 --
 include/configs/s5pc210_universal.h        | 2 --
 include/configs/sacsng.h                   | 1 -
 include/configs/sama5d3xek.h               | 1 -
 include/configs/sandbox.h                  | 2 --
 include/configs/sbc35_a9g20.h              | 1 -
 include/configs/sbc405.h                   | 2 --
 include/configs/sbc8349.h                  | 1 -
 include/configs/sbc8548.h                  | 1 -
 include/configs/sbc8641d.h                 | 1 -
 include/configs/sh7752evb.h                | 1 -
 include/configs/sh7757lcr.h                | 1 -
 include/configs/sh7763rdp.h                | 1 -
 include/configs/sh7785lcr.h                | 1 -
 include/configs/shmin.h                    | 1 -
 include/configs/smdk2410.h                 | 2 --
 include/configs/smdkc100.h                 | 2 --
 include/configs/smdkv310.h                 | 2 --
 include/configs/snapper9260.h              | 1 -
 include/configs/snowball.h                 | 1 -
 include/configs/socfpga_cyclone5.h         | 1 -
 include/configs/socrates.h                 | 1 -
 include/configs/spear-common.h             | 1 -
 include/configs/spieval.h                  | 2 --
 include/configs/stamp9g20.h                | 1 -
 include/configs/stxgp3.h                   | 1 -
 include/configs/stxssa.h                   | 1 -
 include/configs/t4qds.h                    | 1 -
 include/configs/tam3517-common.h           | 1 -
 include/configs/tb0229.h                   | 2 --
 include/configs/tegra-common.h             | 2 --
 include/configs/ti814x_evm.h               | 2 --
 include/configs/ti816x_evm.h               | 1 -
 include/configs/ti_armv7_common.h          | 1 -
 include/configs/titanium.h                 | 1 -
 include/configs/tnetv107x_evm.h            | 1 -
 include/configs/tny_a9260.h                | 1 -
 include/configs/top9000.h                  | 1 -
 include/configs/trats.h                    | 2 --
 include/configs/tricorder.h                | 1 -
 include/configs/trizepsiv.h                | 1 -
 include/configs/tt01.h                     | 2 --
 include/configs/tx25.h                     | 1 -
 include/configs/u8500_href.h               | 1 -
 include/configs/utx8245.h                  | 1 -
 include/configs/v38b.h                     | 2 --
 include/configs/vct.h                      | 1 -
 include/configs/ve8313.h                   | 1 -
 include/configs/vexpress_common.h          | 1 -
 include/configs/vf610twr.h                 | 1 -
 include/configs/vision2.h                  | 1 -
 include/configs/vl_ma2sc.h                 | 1 -
 include/configs/vme8349.h                  | 1 -
 include/configs/wandboard.h                | 1 -
 include/configs/woodburn_common.h          | 3 ---
 include/configs/x600.h                     | 1 -
 include/configs/xaeniax.h                  | 1 -
 include/configs/xilinx-ppc.h               | 1 -
 include/configs/xpedite1000.h              | 1 -
 include/configs/xpedite517x.h              | 1 -
 include/configs/xpedite520x.h              | 1 -
 include/configs/xpedite537x.h              | 1 -
 include/configs/xpedite550x.h              | 1 -
 include/configs/zeus.h                     | 2 --
 include/configs/zmx25.h                    | 1 -
 include/configs/zynq.h                     | 1 -
 412 files changed, 4 insertions(+), 626 deletions(-)

diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h
index a46baf2..c985401 100644
--- a/arch/arm/include/asm/arch-lpc32xx/config.h
+++ b/arch/arm/include/asm/arch-lpc32xx/config.h
@@ -15,9 +15,6 @@
#define CONFIG_NR_DRAM_BANKS_MAX	2
-/* 1KHz clock tick */
-#define CONFIG_SYS_HZ			1000
-
 /* UART configuration */
 #if (CONFIG_SYS_LPC32XX_UART >= 3) && (CONFIG_SYS_LPC32XX_UART <= 6)
 #define CONFIG_SYS_NS16550_SERIAL
diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h
index e59ee96..4c25289 100644
--- a/include/config_fallbacks.h
+++ b/include/config_fallbacks.h
@@ -53,4 +53,8 @@
 #define HAVE_BLOCK_DEVICE
 #endif
+#ifndef CONFIG_SYS_HZ
+#define CONFIG_SYS_HZ		1000
+#endif
+
 #endif	/* __CONFIG_FALLBACKS_H */
diff --git a/include/configs/A3000.h b/include/configs/A3000.h
index 90a2176..8f3a672 100644
--- a/include/configs/A3000.h
+++ b/include/configs/A3000.h
@@ -168,7 +168,6 @@
  */
#define CONFIG_SYS_CLK_FREQ  33333333	/* external frequency to pll */
-#define CONFIG_SYS_HZ		     1000
/* Bit-field values for MCCR1.
     */
diff --git a/include/configs/AR405.h b/include/configs/AR405.h
index 1105179..7f757b0 100644
--- a/include/configs/AR405.h
+++ b/include/configs/AR405.h
@@ -128,8 +128,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
/*-----------------------------------------------------------------------
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index 54de966..29d704d 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -123,8 +123,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
diff --git a/include/configs/Adder.h b/include/configs/Adder.h
index 1a159ad..ffe380d 100644
--- a/include/configs/Adder.h
+++ b/include/configs/Adder.h
@@ -82,8 +82,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x400000	/* Default load address		*/
-#define CONFIG_SYS_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
-
 /*-----------------------------------------------------------------------
  * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero)
  */
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index 2f0bc6b..071519b 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -725,7 +725,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks*/
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index 0c50919..528bef1 100644
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -445,8 +445,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	    */
-#define CONFIG_SYS_HZ			1000		/* dec freq: 1ms ticks	    */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs		    */
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value    */
diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index 948394e..aea04ec 100644
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -372,7 +372,6 @@ extern unsigned long get_sdram_size(void);
    					/* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index 03f3a4f..b1217d6 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -614,7 +614,6 @@ combinations. this should be removed later
    					/* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq:1ms ticks */
/*
diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h
index 83779ef..714edf8 100644
--- a/include/configs/C29XPCIE.h
+++ b/include/configs/C29XPCIE.h
@@ -401,7 +401,6 @@
    					/* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* dec freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 3906863..16d539b 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -185,8 +185,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
/*-----------------------------------------------------------------------
diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index 323eac3..29f933b 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -121,8 +121,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
index 9a083b7..2ce6cb7 100644
--- a/include/configs/CPC45.h
+++ b/include/configs/CPC45.h
@@ -180,7 +180,6 @@
  */
#define CONFIG_SYS_CLK_FREQ	33000000
-#define CONFIG_SYS_HZ			1000
/* Bit-field values for MCCR1.
diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h
index bd9fd6e..3a6706f 100644
--- a/include/configs/CPCI2DP.h
+++ b/include/configs/CPCI2DP.h
@@ -111,8 +111,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_LOOPW            1       /* enable loopw command         */
#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h
index 94ef16e..dc439b6 100644
--- a/include/configs/CPCI405.h
+++ b/include/configs/CPCI405.h
@@ -124,8 +124,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_LOOPW            1       /* enable loopw command         */
#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index 8383c19..5606f71 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -133,8 +133,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_CMDLINE_EDITING		/* add command line history	*/
#define CONFIG_LOOPW            1       /* enable loopw command         */
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index ec9f5ae..8d9aee6 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -132,8 +132,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_CMDLINE_EDITING		/* add command line history	*/
#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h
index ba926ab..70b4734 100644
--- a/include/configs/CPCI405DT.h
+++ b/include/configs/CPCI405DT.h
@@ -134,8 +134,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_LOOPW            1       /* enable loopw command         */
#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h
index cd2fa95..a2068e2 100644
--- a/include/configs/CPCI750.h
+++ b/include/configs/CPCI750.h
@@ -219,7 +219,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x00300000	/* default load address */
-#define CONFIG_SYS_HZ			1000		/* decr freq: 1ms ticks */
 #define CONFIG_SYS_BUS_CLK		133000000	/* 133 MHz (CPU = 5*Bus = 666MHz)		*/
#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h
index dc4df29..b727aa9 100644
--- a/include/configs/CPCIISER4.h
+++ b/include/configs/CPCIISER4.h
@@ -111,8 +111,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
/*-----------------------------------------------------------------------
diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h
index 7bbcb77..9268ec9 100644
--- a/include/configs/CPU87.h
+++ b/include/configs/CPU87.h
@@ -200,8 +200,6 @@
#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_RESET_ADDRESS 0xFFF00100	/* "bad" address		*/
#define CONFIG_LOOPW
diff --git a/include/configs/CU824.h b/include/configs/CU824.h
index f6f05a4..b45124d 100644
--- a/include/configs/CU824.h
+++ b/include/configs/CU824.h
@@ -144,7 +144,6 @@
  */
#define CONFIG_SYS_CLK_FREQ  33000000
-#define CONFIG_SYS_HZ		     1000
/* Bit-field values for MCCR1.
     */
diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h
index 2000a88..502ed24 100644
--- a/include/configs/DB64360.h
+++ b/include/configs/DB64360.h
@@ -300,7 +300,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
#define CONFIG_SYS_LOAD_ADDR		0x00400000	/* default load address */
-#define CONFIG_SYS_HZ			1000		/* decr freq: 1ms ticks */
 /*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */
 #define CONFIG_SYS_BUS_CLK		133000000	/* 133 MHz (CPU = 5*Bus = 666MHz)		*/
diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h
index e0f7e46..d13b357 100644
--- a/include/configs/DB64460.h
+++ b/include/configs/DB64460.h
@@ -238,7 +238,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
#define CONFIG_SYS_LOAD_ADDR		0x00400000	/* default load address */
-#define CONFIG_SYS_HZ			1000		/* decr freq: 1ms ticks */
 /*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */
 #define CONFIG_SYS_BUS_CLK		133000000	/* 133 MHz (CPU = 5*Bus = 666MHz)		*/
diff --git a/include/configs/DP405.h b/include/configs/DP405.h
index 872a2b4..72f65fd 100644
--- a/include/configs/DP405.h
+++ b/include/configs/DP405.h
@@ -98,8 +98,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
diff --git a/include/configs/DU405.h b/include/configs/DU405.h
index 5b9e0d2..c6fa2c7 100644
--- a/include/configs/DU405.h
+++ b/include/configs/DU405.h
@@ -115,8 +115,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index 0827113..b37c579 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -327,8 +327,6 @@ int du440_phy_addr(int devnum);
 #define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h
index fb2f3be..d52721c 100644
--- a/include/configs/ELPPC.h
+++ b/include/configs/ELPPC.h
@@ -96,8 +96,6 @@
#define CONFIG_SYS_LOAD_ADDR           0x1000000   /* default load address    */
-#define CONFIG_SYS_HZ                  1000        /* dec. freq: 1 ms ticks */
-
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
/*
diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h
index 69f44b1..a9d62c8 100644
--- a/include/configs/ELPT860.h
+++ b/include/configs/ELPT860.h
@@ -120,8 +120,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 /*
  * Environment Variables and Storages
  */
diff --git a/include/configs/EP88x.h b/include/configs/EP88x.h
index 1d9d0df..348f671 100644
--- a/include/configs/EP88x.h
+++ b/include/configs/EP88x.h
@@ -77,8 +77,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x400000	/* Default load address		*/
-#define CONFIG_SYS_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
-
 /*-----------------------------------------------------------------------
  * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero)
  */
diff --git a/include/configs/FLAGADM.h b/include/configs/FLAGADM.h
index a5d1a9c..6c2dbf6 100644
--- a/include/configs/FLAGADM.h
+++ b/include/configs/FLAGADM.h
@@ -94,8 +94,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x40040000	/* default load address */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index 5a74abc..2cdaa69 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -150,8 +150,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index 06c0e50..2822a08 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -310,11 +310,6 @@
 #define	CONFIG_SYS_LOAD_ADDR		0x01000000
/*
- * Set decrementer frequency (1 ms ticks)
- */
-#define	CONFIG_SYS_HZ				1000
-
-/*
  * Device memory map (after SDRAM remap to 0x0):
  *
  * CS		Device				Base Addr	Size
diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h
index ddeccb0..f5e6565 100644
--- a/include/configs/HIDDEN_DRAGON.h
+++ b/include/configs/HIDDEN_DRAGON.h
@@ -70,7 +70,6 @@
 #define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 #define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address		*/
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
/*-----------------------------------------------------------------------
  * PCI stuff
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index cf796bf..00413b4 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -117,8 +117,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
diff --git a/include/configs/HWW1U1A.h b/include/configs/HWW1U1A.h
index 5aaa976..f3f2136 100644
--- a/include/configs/HWW1U1A.h
+++ b/include/configs/HWW1U1A.h
@@ -53,8 +53,6 @@
/* Enable IRQs and watchdog with a 1000Hz system decrementer */
 #define CONFIG_CMD_IRQ
-#define CONFIG_SYS_HZ 1000
-
/* -------------------------------------------------------------------- */
diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h
index cbc8b5b..3e24d8c 100644
--- a/include/configs/IPHASE4539.h
+++ b/include/configs/IPHASE4539.h
@@ -154,8 +154,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_SYS_RESET_ADDRESS	0x04400000
#define CONFIG_MISC_INIT_R	1	/* We need misc_init_r()	*/
diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h
index b0287e2..f80987c 100644
--- a/include/configs/ISPAN.h
+++ b/include/configs/ISPAN.h
@@ -141,8 +141,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* Default load address		*/
-#define CONFIG_SYS_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_SYS_RESET_ADDRESS	0x09900000
#define CONFIG_MISC_INIT_R			/* We need misc_init_r()	*/
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index df29c7d..58cf9db 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -315,8 +315,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
diff --git a/include/configs/JSE.h b/include/configs/JSE.h
index 6439d99..dad5603 100644
--- a/include/configs/JSE.h
+++ b/include/configs/JSE.h
@@ -192,8 +192,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_PPC4XX
 #define CONFIG_SYS_I2C_PPC4XX_CH0
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index ef51e35..eafb341 100644
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -172,8 +172,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 115200 }
#define CONFIG_SYS_CONSOLE_INFO_QUIET 1
diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h
index 6da07e7..c987e9e 100644
--- a/include/configs/KUP4X.h
+++ b/include/configs/KUP4X.h
@@ -191,8 +191,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x003C00000	/* 4 ... 60 MB in DRAM	*/
 #define CONFIG_SYS_LOAD_ADDR		0x200000	/* default load address */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 115200 }
#define CONFIG_SYS_CONSOLE_INFO_QUIET 1
diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h
index fe901ce..72107e0 100644
--- a/include/configs/M5208EVBE.h
+++ b/include/configs/M5208EVBE.h
@@ -113,7 +113,6 @@
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Arg Buf Sz */
 #define CONFIG_SYS_LOAD_ADDR	0x40010000
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_SYS_CLK		166666666	/* CPU Core Clock */
 #define CONFIG_SYS_PLL_ODR	0x36
 #define CONFIG_SYS_PLL_FDR	0x7D
diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h
index 1d10f7f..3d999ad 100644
--- a/include/configs/M52277EVB.h
+++ b/include/configs/M52277EVB.h
@@ -176,8 +176,6 @@
#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 0x10000)
-#define CONFIG_SYS_HZ		1000
-
 #define CONFIG_SYS_MBAR		0xFC000000
/*
diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h
index aaaaa41..7078084 100644
--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -133,7 +133,6 @@
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE+0x20000)
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CLK			75000000
 #define CONFIG_SYS_CPU_CLK		CONFIG_SYS_CLK * 2
diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h
index 2a1a904..3f6e937 100644
--- a/include/configs/M5249EVB.h
+++ b/include/configs/M5249EVB.h
@@ -69,8 +69,6 @@
 #define CONFIG_SYS_MEMTEST_START	0x400
 #define CONFIG_SYS_MEMTEST_END		0x380000
-#define CONFIG_SYS_HZ			1000
-
 /*
  * Clock configuration: enable only one of the following options
  */
diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index 83122cf..d837e42 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -124,8 +124,6 @@ TABILITY or FITNESS FO04-2007 Freescale Semiconductor, Inc.
 #define CONFIG_SYS_MEMTEST_START	0x400
 #define CONFIG_SYS_MEMTEST_END		0x380000
-#define CONFIG_SYS_HZ			1000
-
 #undef CONFIG_SYS_PLL_BYPASS		/* bypass PLL for test purpose */
 #define CONFIG_SYS_FAST_CLK
 #ifdef CONFIG_SYS_FAST_CLK
diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h
index 109b1c0..bdbb413 100644
--- a/include/configs/M5253EVBE.h
+++ b/include/configs/M5253EVBE.h
@@ -93,8 +93,6 @@
 #define CONFIG_SYS_MEMTEST_START	0x400
 #define CONFIG_SYS_MEMTEST_END		0x380000
-#define CONFIG_SYS_HZ			1000
-
 #undef CONFIG_SYS_PLL_BYPASS		/* bypass PLL for test purpose */
 #define CONFIG_SYS_FAST_CLK
 #ifdef CONFIG_SYS_FAST_CLK
diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h
index 434c839..d12f00f 100644
--- a/include/configs/M5272C3.h
+++ b/include/configs/M5272C3.h
@@ -129,7 +129,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x20000
 #define CONFIG_SYS_MEMTEST_START	0x400
 #define CONFIG_SYS_MEMTEST_END		0x380000
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CLK			66000000
/*
diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index bacee0a..c6d986c 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -139,7 +139,6 @@
    "save\0"				\
    ""
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CLK			150000000
/*
diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h
index d22018f..fd970d0 100644
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -117,7 +117,6 @@
 #define CONFIG_SYS_MEMTEST_START	0x400
 #define CONFIG_SYS_MEMTEST_END		0x380000
-#define CONFIG_SYS_HZ			1000
 #define	CONFIG_SYS_CLK			64000000
/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h
index 0ced196..e2ec34e 100644
--- a/include/configs/M53017EVB.h
+++ b/include/configs/M53017EVB.h
@@ -133,7 +133,6 @@
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Arg Buf Sz */
 #define CONFIG_SYS_LOAD_ADDR	0x40010000
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_SYS_CLK		80000000
 #define CONFIG_SYS_CPU_CLK	CONFIG_SYS_CLK * 3
diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h
index 86b06f4..46b890e 100644
--- a/include/configs/M5329EVB.h
+++ b/include/configs/M5329EVB.h
@@ -126,7 +126,6 @@
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 #define CONFIG_SYS_LOAD_ADDR		0x40010000
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CLK			80000000
 #define CONFIG_SYS_CPU_CLK		CONFIG_SYS_CLK * 3
diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h
index cca7609..b67dad0 100644
--- a/include/configs/M5373EVB.h
+++ b/include/configs/M5373EVB.h
@@ -126,7 +126,6 @@
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 #define CONFIG_SYS_LOAD_ADDR		0x40010000
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CLK			80000000
 #define CONFIG_SYS_CPU_CLK		CONFIG_SYS_CLK * 3
diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h
index bc26427..2eb93be 100644
--- a/include/configs/M54418TWR.h
+++ b/include/configs/M54418TWR.h
@@ -253,8 +253,6 @@
#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_SYS_MBAR		0xFC000000
/*
diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h
index 72ad836..50c528f 100644
--- a/include/configs/M54451EVB.h
+++ b/include/configs/M54451EVB.h
@@ -187,8 +187,6 @@
#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_SYS_MBAR			0xFC000000
/*
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index 3dc87d6..d97218d 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -246,8 +246,6 @@
#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_SYS_MBAR		0xFC000000
/*
diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h
index dc38219..cdaaf7f 100644
--- a/include/configs/M5475EVB.h
+++ b/include/configs/M5475EVB.h
@@ -172,7 +172,6 @@
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 #define CONFIG_SYS_LOAD_ADDR		0x00010000
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CLK			CONFIG_SYS_BUSCLK
 #define CONFIG_SYS_CPU_CLK		CONFIG_SYS_CLK * 2
diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h
index 0307f19..47dbe9e 100644
--- a/include/configs/M5485EVB.h
+++ b/include/configs/M5485EVB.h
@@ -158,7 +158,6 @@
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 #define CONFIG_SYS_LOAD_ADDR		0x00010000
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CLK			CONFIG_SYS_BUSCLK
 #define CONFIG_SYS_CPU_CLK		CONFIG_SYS_CLK * 2
diff --git a/include/configs/MBX.h b/include/configs/MBX.h
index b3cd12d..e6e1dfd 100644
--- a/include/configs/MBX.h
+++ b/include/configs/MBX.h
@@ -98,8 +98,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/MERGERBOX.h b/include/configs/MERGERBOX.h
index ad9c77e..61e2a08 100644
--- a/include/configs/MERGERBOX.h
+++ b/include/configs/MERGERBOX.h
@@ -367,7 +367,6 @@
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS	16
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000
#define CONFIG_LOADS_ECHO		1
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1
diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h
index 75eef20..d67ae84 100644
--- a/include/configs/MHPC.h
+++ b/include/configs/MHPC.h
@@ -144,8 +144,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x300000	/* default load address */
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index c535dbe..54fe3de 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -180,8 +180,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x400000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h
index f9fc8ff..4c25a44 100644
--- a/include/configs/MOUSSE.h
+++ b/include/configs/MOUSSE.h
@@ -153,7 +153,6 @@
#define CONFIG_SYS_CLK_FREQ  33000000	/* external frequency to pll */
 #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER  2
-#define CONFIG_SYS_HZ               1000
#define CONFIG_SYS_ETH_DEV_FN       0x00
 #define CONFIG_SYS_ETH_IOBASE       0x00104000
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 0f6ca94..fcfbe55 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -287,8 +287,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_SYS_FLASH_BASE		0xff800000
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index 5a101cf..cf6f01a 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -229,8 +229,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_SYS_FLASH_BASE		0xFE000000
diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h
index d315729..f90f6dc 100644
--- a/include/configs/MPC8308RDB.h
+++ b/include/configs/MPC8308RDB.h
@@ -471,7 +471,6 @@
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index ddcbfa6..1e35249 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -520,7 +520,6 @@
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
    			/* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index fef19d4..5d3f84d 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -532,7 +532,6 @@
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
    			/* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index d5db65d..f7608ec 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -368,7 +368,6 @@
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
    			/* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index 32e05af..f088b26 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -454,7 +454,6 @@
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
    			/* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 432db72..39a658d 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -520,7 +520,6 @@
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
    			/* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index c3a577f..8655265 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -562,7 +562,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
    			/* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index 7c4f3ef..919b175 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -557,7 +557,6 @@
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
    			/* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 1973447..6842b4b 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -418,7 +418,6 @@
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
    			/* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 51688a7..0c3ef5a 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -536,7 +536,6 @@ extern int board_pci_host_broken(void);
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
    			/* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index a5fe220..6d55fb8 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -551,7 +551,6 @@
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
    			/* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 8ff2c3a..033024b 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -730,7 +730,6 @@
    	+ sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index acd37a0..ade5188 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -387,7 +387,6 @@
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 61775d2..3d3e345 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -400,7 +400,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 2a5e5d4..34ad000 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -430,7 +430,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 8deb241..3f68dd5 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -525,7 +525,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 1ec3797..affae4c 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -398,7 +398,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 49f6a35..b511c59 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -428,7 +428,6 @@
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 2d5e8c0..6f66463 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -420,7 +420,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index c35fd2b..945d44a 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -556,7 +556,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_MAXARGS	32		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
    					/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ	1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 05d8870..179a10b 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -669,7 +669,6 @@
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 1553a74..76c80d4 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -507,7 +507,6 @@
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 6ca6f6b..5769c37 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -660,7 +660,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h
index 96efc63..b08e86e 100644
--- a/include/configs/MUSENKI.h
+++ b/include/configs/MUSENKI.h
@@ -151,7 +151,6 @@
  */
#define CONFIG_SYS_CLK_FREQ  33333333	/* external frequency to pll */
-#define CONFIG_SYS_HZ		     1000
/* Bit-field values for MCCR1.
     */
diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h
index b7bc920..68e8539 100644
--- a/include/configs/MVBC_P.h
+++ b/include/configs/MVBC_P.h
@@ -266,8 +266,6 @@
 #define CONFIG_SYS_MEMTEST_START	0x00800000
 #define CONFIG_SYS_MEMTEST_END		0x02f00000
-#define CONFIG_SYS_HZ			1000
-
 /* default load address */
 #define CONFIG_SYS_LOAD_ADDR		0x02000000
 /* default location for tftp and bootm */
diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h
index 044a1bc..8f71a54 100644
--- a/include/configs/MVBLM7.h
+++ b/include/configs/MVBLM7.h
@@ -292,7 +292,6 @@
    		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS	16
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MVSMR.h b/include/configs/MVSMR.h
index 47f5c32..f9c49c8 100644
--- a/include/configs/MVSMR.h
+++ b/include/configs/MVSMR.h
@@ -236,8 +236,6 @@
 #define CONFIG_SYS_MEMTEST_START	0x00800000
 #define CONFIG_SYS_MEMTEST_END		0x02f00000
-#define CONFIG_SYS_HZ			1000
-
 /* default load address */
 #define CONFIG_SYS_LOAD_ADDR		0x02000000
 /* default location for tftp and bootm */
diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h
index dc4a768..2d42a3d 100644
--- a/include/configs/MigoR.h
+++ b/include/configs/MigoR.h
@@ -124,6 +124,5 @@
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define CONFIG_SYS_TMU_CLK_DIV		(4)	/* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ		1000
#endif	/* __MIGO_R_H */
diff --git a/include/configs/NX823.h b/include/configs/NX823.h
index 635f9ce..e903116 100644
--- a/include/configs/NX823.h
+++ b/include/configs/NX823.h
@@ -83,8 +83,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h
index c919613..e4af3f5 100644
--- a/include/configs/OCRTC.h
+++ b/include/configs/OCRTC.h
@@ -107,8 +107,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
/*-----------------------------------------------------------------------
diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h
index 56d251c..c562344 100644
--- a/include/configs/ORSG.h
+++ b/include/configs/ORSG.h
@@ -105,8 +105,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
/*-----------------------------------------------------------------------
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index ba3f7c2..88d6e0b 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -675,7 +675,6 @@ extern unsigned long get_sdram_size(void);
    					/* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* dec freq: 1ms ticks */
/*
  * Internal Definitions
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index edece1f..b4bdad2 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -715,7 +715,6 @@
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS	16
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h
index cd6d20c..00a9b2f 100644
--- a/include/configs/P1023RDB.h
+++ b/include/configs/P1023RDB.h
@@ -323,7 +323,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ	1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h
index a8202c6..5a7a9d1 100644
--- a/include/configs/P1023RDS.h
+++ b/include/configs/P1023RDS.h
@@ -459,7 +459,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ	1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index adaed56..d6537d4 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -596,7 +596,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
    					/* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h
index 08d1c25..11f08c8 100644
--- a/include/configs/P2020COME.h
+++ b/include/configs/P2020COME.h
@@ -422,7 +422,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
    					/* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms tick */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index b5078cd..db94b98 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -659,7 +659,6 @@
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 905bacf..7928f84 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -667,7 +667,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000		/* decrementer freq 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
index a71a521..2dacc7e 100644
--- a/include/configs/PCI405.h
+++ b/include/configs/PCI405.h
@@ -110,8 +110,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #undef CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
diff --git a/include/configs/PCI5441.h b/include/configs/PCI5441.h
index 84ef49c..4812de7 100644
--- a/include/configs/PCI5441.h
+++ b/include/configs/PCI5441.h
@@ -101,7 +101,6 @@
  * If the default period is acceptable, TMRCNT can be left undefined.
  * TMRMS represents the desired mecs per tick (msecs per interrupt).
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_HZ			1000	/* Always 1000 */
 #define CONFIG_SYS_LOW_RES_TIMER
 #define CONFIG_SYS_NIOS_TMRBASE	0x00920860	/* Tick timer base addr	*/
 #define CONFIG_SYS_NIOS_TMRIRQ		3	/* Timer IRQ num */
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 2251ca6..6a2dac8 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -173,8 +173,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h
index 115c89a..f29861e 100644
--- a/include/configs/PK1C20.h
+++ b/include/configs/PK1C20.h
@@ -111,7 +111,6 @@
  * If the default period is acceptable, TMRCNT can be left undefined.
  * TMRMS represents the desired mecs per tick (msecs per interrupt).
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_HZ			1000	/* Always 1000 */
 #define CONFIG_SYS_LOW_RES_TIMER
 #define CONFIG_SYS_NIOS_TMRBASE	0x02120820	/* Tick timer base addr */
 #define CONFIG_SYS_NIOS_TMRIRQ		3	/* Timer IRQ num */
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 3c31cfb..58fccc3 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -134,8 +134,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index 7ab1d84..c6dc745 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -266,8 +266,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
diff --git a/include/configs/PM828.h b/include/configs/PM828.h
index cb68c41..88e4719 100644
--- a/include/configs/PM828.h
+++ b/include/configs/PM828.h
@@ -183,8 +183,6 @@
#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address		*/
/*
diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index 67a96d2..5407594 100644
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -128,8 +128,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1	/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history */
 #define CONFIG_LOOPW		1	/* enable loopw command */
diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h
index 531e956..54316a6 100644
--- a/include/configs/PMC405DE.h
+++ b/include/configs/PMC405DE.h
@@ -104,8 +104,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1	/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history     */
 #define CONFIG_LOOPW		1	/* enable loopw command         */
 #define CONFIG_MX_CYCLIC	1	/* enable mdc/mwc commands      */
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index a54c099..8efcdc3 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -388,8 +388,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address      */
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history     */
 #define CONFIG_LOOPW		1	/* enable loopw command         */
 #define CONFIG_MX_CYCLIC	1	/* enable mdc/mwc commands      */
diff --git a/include/configs/PN62.h b/include/configs/PN62.h
index fbf8a99..c6753d8 100644
--- a/include/configs/PN62.h
+++ b/include/configs/PN62.h
@@ -92,7 +92,6 @@
 #define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 #define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address		*/
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
#define CONFIG_PRAM		1024		/* reserve 1 MB protected RAM	*/
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index cd9eb4b..45380ed 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -194,8 +194,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
/*-----------------------------------------------------------------------
diff --git a/include/configs/QS823.h b/include/configs/QS823.h
index d712828..8a73705 100644
--- a/include/configs/QS823.h
+++ b/include/configs/QS823.h
@@ -236,8 +236,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
-
 /*-----------------------------------------------------------------------
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/QS850.h b/include/configs/QS850.h
index 3229095..1750854 100644
--- a/include/configs/QS850.h
+++ b/include/configs/QS850.h
@@ -236,8 +236,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
-
 /*-----------------------------------------------------------------------
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h
index 7c77c6b..dc5b872 100644
--- a/include/configs/QS860T.h
+++ b/include/configs/QS860T.h
@@ -146,8 +146,6 @@ CONFIG_SPI
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
-
 /*-----------------------------------------------------------------------
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h
index ffc84d2..50c82c6 100644
--- a/include/configs/RPXlite_DW.h
+++ b/include/configs/RPXlite_DW.h
@@ -162,8 +162,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x00C0000	/* 4 ... 12 MB in DRAM	*/
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h
index d4d3d57..7f01450 100644
--- a/include/configs/RPXsuper.h
+++ b/include/configs/RPXsuper.h
@@ -214,7 +214,6 @@
 #define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
#define CONFIG_SYS_LOAD_ADDR     0x100000     /* default load address */
-#define CONFIG_SYS_HZ            1000         /* decrementer freq: 1 ms ticks */
/*
  * Low Level Configuration Settings
diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h
index 1404634..df91b43 100644
--- a/include/configs/Rattler.h
+++ b/include/configs/Rattler.h
@@ -170,8 +170,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_SYS_FLASH_BASE		0xFE000000
diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h
index 3448ef3..486d7fa 100644
--- a/include/configs/SIMPC8313.h
+++ b/include/configs/SIMPC8313.h
@@ -366,7 +366,6 @@
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
    			/* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h
index ed8a32f..29d3d67 100644
--- a/include/configs/Sandpoint8240.h
+++ b/include/configs/Sandpoint8240.h
@@ -104,7 +104,6 @@
 #define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 #define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address		*/
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
/*-----------------------------------------------------------------------
  * PCI stuff
diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h
index 97e8968..aa02795 100644
--- a/include/configs/Sandpoint8245.h
+++ b/include/configs/Sandpoint8245.h
@@ -72,7 +72,6 @@
 #define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 #define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address		*/
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
/*-----------------------------------------------------------------------
  * PCI stuff
diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h
index bce4176..234fe70 100644
--- a/include/configs/TASREG.h
+++ b/include/configs/TASREG.h
@@ -84,8 +84,6 @@
 #define CONFIG_SYS_MEMTEST_START	0x400
 #define CONFIG_SYS_MEMTEST_END		0x380000
-#define CONFIG_SYS_HZ			1000
-
 /*
  * Clock configuration: enable only one of the following options
  */
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 1fa4714..b712d68 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -410,8 +410,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Enable loopw command.
  */
diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h
index 7f2b842..35b1588 100644
--- a/include/configs/TK885D.h
+++ b/include/configs/TK885D.h
@@ -175,8 +175,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Enable loopw command.
  */
diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index 00056a3..84fe6e9 100644
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -332,8 +332,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x200000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
index 5c5ce84..6666a12 100644
--- a/include/configs/TOP860.h
+++ b/include/configs/TOP860.h
@@ -68,7 +68,6 @@
 #define	CONFIG_SYS_CPUCLOCK	CONFIG_SYSCLK
 #define	CONFIG_SYS_BRGCLOCK	CONFIG_SYSCLK
 #define	CONFIG_SYS_BUSCLOCK	(CONFIG_SYSCLK >> CONFIG_EBDF)
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 #define	CONFIG_8xx_GCLK_FREQ	CONFIG_SYSCLK
/*-----------------------------------------------------------------------
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 8a4dd35..935b5d3 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -632,8 +632,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Enable loopw command.
  */
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 07b5acb..53b47b6 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -334,7 +334,6 @@
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
    			/* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
#undef CONFIG_WATCHDOG		/* watchdog disabled */
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index 9cf263c..33729f0 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -177,8 +177,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
index 1f52efc..536df3f 100644
--- a/include/configs/TQM885D.h
+++ b/include/configs/TQM885D.h
@@ -173,8 +173,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Enable loopw command.
  */
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 9d88199..a81bcb8 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -294,8 +294,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 2034493..79a6079 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -162,7 +162,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x30800000
/* we configure PWM Timer 4 to 1ms 1000Hz  */
-#define CONFIG_SYS_HZ			1000
/* support additional compression methods */
 #define CONFIG_BZIP2
diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h
index a1dad2b..d7e6446 100644
--- a/include/configs/VOH405.h
+++ b/include/configs/VOH405.h
@@ -132,8 +132,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h
index 5daf175..b115e4f 100644
--- a/include/configs/VOM405.h
+++ b/include/configs/VOM405.h
@@ -119,8 +119,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h
index c4f680b..162b800 100644
--- a/include/configs/VoVPN-GW.h
+++ b/include/configs/VoVPN-GW.h
@@ -232,7 +232,6 @@
 #define	CONFIG_SYS_LOAD_ADDR			0x00100000
/* decrementer freq: 1 ms ticks	*/
-#define	CONFIG_SYS_HZ				1000
/* configure flash */
 #define CONFIG_SYS_FLASH_BASE			0xff800000
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index 51cfcf6..81ecb5d 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -126,8 +126,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address		*/
 #define CONFIG_SYS_EXTBDINFO		1		/* use extended board_info (bd_t) */
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index 6769c0d..3814266 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -134,8 +134,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address		*/
 #define CONFIG_SYS_EXTBDINFO		1		/* use extended board_info (bd_t) */
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index f38d90e..9534b6d 100644
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -121,8 +121,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h
index 2160694..f4ba208 100644
--- a/include/configs/ZPC1900.h
+++ b/include/configs/ZPC1900.h
@@ -154,8 +154,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_SYS_SDRAM_BASE		0x00000000
diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h
index ec86023..2f30424 100644
--- a/include/configs/ZUMA.h
+++ b/include/configs/ZUMA.h
@@ -146,8 +146,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x00300000	/* default load address */
-#define CONFIG_SYS_HZ			1000		/* decr freq: 1ms ticks */
-
 #define CONFIG_SYS_BUS_CLK		133000000	/* 133 MHz		*/
#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h
index bcb7ab4..0d3cf36 100644
--- a/include/configs/a320evb.h
+++ b/include/configs/a320evb.h
@@ -37,7 +37,6 @@
 /*
  * Timer
  */
-#define CONFIG_SYS_HZ		1000	/* timer ticks per second */
/*
  * Real Time Clock
diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h
index 43d3d99..9e50dba 100644
--- a/include/configs/a3m071.h
+++ b/include/configs/a3m071.h
@@ -265,7 +265,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x00100000
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_LOOPW
 #define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup*/
diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h
index d243bc1..3efd513 100644
--- a/include/configs/a4m072.h
+++ b/include/configs/a4m072.h
@@ -286,8 +286,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h
index a2090da..1205557 100644
--- a/include/configs/ac14xx.h
+++ b/include/configs/ac14xx.h
@@ -440,9 +440,6 @@
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-/* decrementer freq: 1ms ticks */
-#define CONFIG_SYS_HZ		1000
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
diff --git a/include/configs/actux1.h b/include/configs/actux1.h
index 33669c2..80b8356 100644
--- a/include/configs/actux1.h
+++ b/include/configs/actux1.h
@@ -79,7 +79,6 @@
/* timer clock - 2* OSC_IN system clock */
 #define CONFIG_IXP425_TIMER_CLK                 66666666
-#define CONFIG_SYS_HZ				1000
/* default load address */
 #define CONFIG_SYS_LOAD_ADDR			0x00010000
diff --git a/include/configs/actux2.h b/include/configs/actux2.h
index 533f469..75126bc 100644
--- a/include/configs/actux2.h
+++ b/include/configs/actux2.h
@@ -72,7 +72,6 @@
/* timer clock - 2* OSC_IN system clock */
 #define CONFIG_IXP425_TIMER_CLK                 66666666
-#define CONFIG_SYS_HZ				1000
/* default load address */
 #define CONFIG_SYS_LOAD_ADDR			0x00010000
diff --git a/include/configs/actux3.h b/include/configs/actux3.h
index 76b5efd..94059b6 100644
--- a/include/configs/actux3.h
+++ b/include/configs/actux3.h
@@ -70,7 +70,6 @@
/* timer clock - 2* OSC_IN system clock */
 #define CONFIG_IXP425_TIMER_CLK                 66666666
-#define CONFIG_SYS_HZ				1000
/* default load address */
 #define CONFIG_SYS_LOAD_ADDR			0x00010000
diff --git a/include/configs/actux4.h b/include/configs/actux4.h
index 1df0a7c..94cb80d 100644
--- a/include/configs/actux4.h
+++ b/include/configs/actux4.h
@@ -77,7 +77,6 @@
/* timer clock - 2* OSC_IN system clock */
 #define CONFIG_IXP425_TIMER_CLK                 66000000
-#define CONFIG_SYS_HZ				1000
/* default load address */
 #define CONFIG_SYS_LOAD_ADDR			0x00010000
diff --git a/include/configs/adp-ag101.h b/include/configs/adp-ag101.h
index 81f71b9..e31131f 100644
--- a/include/configs/adp-ag101.h
+++ b/include/configs/adp-ag101.h
@@ -40,12 +40,6 @@
 /*
  * Timer
  */
-
-/*
- * According to the discussion in u-boot mailing list before,
- * CONFIG_SYS_HZ at 1000 is mandatory.
- */
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_SYS_CLK_FREQ	48000000
 #define VERSION_CLOCK		CONFIG_SYS_CLK_FREQ
diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h
index 48afbf4..ded3f33 100644
--- a/include/configs/adp-ag101p.h
+++ b/include/configs/adp-ag101p.h
@@ -40,12 +40,6 @@
 /*
  * Timer
  */
-
-/*
- * According to the discussion in u-boot mailing list before,
- * CONFIG_SYS_HZ at 1000 is mandatory.
- */
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_SYS_CLK_FREQ	39062500
 #define VERSION_CLOCK		CONFIG_SYS_CLK_FREQ
diff --git a/include/configs/adp-ag102.h b/include/configs/adp-ag102.h
index 681dfa2..1e4ce2e 100644
--- a/include/configs/adp-ag102.h
+++ b/include/configs/adp-ag102.h
@@ -32,12 +32,6 @@
 /*
  * Timer
  */
-
-/*
- * According to the discussion in u-boot mailing list before,
- * CONFIG_SYS_HZ at 1000 is mandatory.
- */
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_SYS_CLK_FREQ	(66000000 * 2)
 #define VERSION_CLOCK		CONFIG_SYS_CLK_FREQ
diff --git a/include/configs/aev.h b/include/configs/aev.h
index 6c0b034..fd44fca 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -338,8 +338,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
index be2f207..a3e4fd2 100644
--- a/include/configs/afeb9260.h
+++ b/include/configs/afeb9260.h
@@ -17,7 +17,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK		18429952	/* from 18.432 MHz crystal */
 #define CONFIG_SYS_AT91_SLOW_CLOCK		32768
-#define CONFIG_SYS_HZ				1000
#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_DISPLAY_CPUINFO
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index 5431b09..8542764 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -255,8 +255,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC	1       /* enable mdc/mwc commands      */
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 1fd2508..c5e67bf 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -239,7 +239,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 6500878..5ff65c6 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -231,7 +231,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 5c802a1..59846f3 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -75,7 +75,6 @@
#define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/* NS16550 Configuration */
 #define CONFIG_SYS_NS16550
diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h
index 580d079..ff5bac4 100644
--- a/include/configs/amcc-common.h
+++ b/include/configs/amcc-common.h
@@ -90,8 +90,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
 #define CONFIG_SYS_EXTBDINFO			/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_CMDLINE_EDITING		/* add command line history	*/
 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support	*/
 #define CONFIG_LOOPW			/* enable loopw command         */
diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h
index af3a427..2be28f9 100644
--- a/include/configs/ap325rxa.h
+++ b/include/configs/ap325rxa.h
@@ -156,6 +156,5 @@
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define CONFIG_SYS_TMU_CLK_DIV		(4)	/* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ		1000
#endif	/* __AP325RXA_H */
diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h
index b911291..e8d2650 100644
--- a/include/configs/ap_sh4a_4a.h
+++ b/include/configs/ap_sh4a_4a.h
@@ -159,6 +159,5 @@
 #define CONFIG_SYS_CLK_FREQ 44444444
 #endif
 #define CONFIG_SYS_TMU_CLK_DIV      4
-#define CONFIG_SYS_HZ       1000
#endif	/* __AP_SH4A_4A_H */
diff --git a/include/configs/aria.h b/include/configs/aria.h
index 68f25ea..5a72fcb 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -485,8 +485,6 @@
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h
index 9f357ea..3694340 100644
--- a/include/configs/armadillo-800eva.h
+++ b/include/configs/armadillo-800eva.h
@@ -139,6 +139,5 @@
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	50000000
 #define CONFIG_SYS_TMU_CLK_DIV	4
-#define CONFIG_SYS_HZ		1000
#endif	/* __ARMADILLO_800EVA_H */
diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index ed9400e..0a89368 100644
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -110,10 +110,8 @@
 /*
  * Defines processor clock - important for correct timings concerning serial
  * interface etc.
- * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms
  */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CLK			80000000
 #define CONFIG_SYS_CPU_CLK		(CONFIG_SYS_CLK * 3)
 #define CONFIG_SYS_SDRAM_SIZE		32		/* SDRAM size in MB */
diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h
index e158b0d..c03f385 100644
--- a/include/configs/at91rm9200ek.h
+++ b/include/configs/at91rm9200ek.h
@@ -43,7 +43,6 @@
 #define AT91C_MAIN_CLOCK		((AT91C_XTAL_CLOCK / 4) * 39)
 #define AT91C_MASTER_CLOCK		(AT91C_MAIN_CLOCK / 3 )
 #define CONFIG_SYS_HZ_CLOCK		(AT91C_MASTER_CLOCK / 2)
-#define CONFIG_SYS_HZ			1000
/* CPU configuration */
 #define CONFIG_AT91RM9200
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index d7fd6b0..ce0ca80 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -28,7 +28,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000	/* main clock xtal */
-#define CONFIG_SYS_HZ			1000
/* Define actual evaluation board type from used processor type */
 #ifdef CONFIG_AT91SAM9G20
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index af56604..fcdf044 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -14,7 +14,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000	/* 18.432 MHz crystal */
-#define CONFIG_SYS_HZ			1000
#ifdef CONFIG_AT91SAM9G10
 #define CONFIG_AT91SAM9G10EK		/* It's an Atmel AT91SAM9G10 EK*/
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 40e167c..5a39392 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -26,7 +26,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	16367660 /* 16.367 MHz crystal */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
-#define CONFIG_SYS_HZ			1000
#define CONFIG_AT91SAM9263EK	1	/* It's an AT91SAM9263EK Board */
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 2aea555..dddf9c5 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -19,7 +19,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
-#define CONFIG_SYS_HZ		        1000
#define CONFIG_AT91SAM9M10G45EK
 #define CONFIG_AT91FAMILY
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index be8a28c..e5a1ec8 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -24,7 +24,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	16000000	/* main clock xtal */
-#define CONFIG_SYS_HZ			1000
/* Misc CPU related */
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index b08848e..3747098 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -18,7 +18,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* main clock xtal */
-#define CONFIG_SYS_HZ			1000
#define CONFIG_AT91SAM9RLEK		1	/* It's an AT91SAM9RLEK Board */
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 2b1533c..ecbe540 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -14,7 +14,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12 MHz crystal */
-#define CONFIG_SYS_HZ			1000
#define CONFIG_AT91SAM9X5EK
 #define CONFIG_AT91FAMILY
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index c87e414..597bede 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -15,8 +15,6 @@
 #define CONFIG_AT32AP7000
 #define CONFIG_ATNGW100
-#define CONFIG_SYS_HZ				1000
-
 /*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h
index 8e4ad07..bd4dca5 100644
--- a/include/configs/atngw100mkii.h
+++ b/include/configs/atngw100mkii.h
@@ -18,12 +18,6 @@
 #define CONFIG_ATNGW100MKII
/*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ			1000
-
-/*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
  * and the PBA bus to run at 1/4 the PLL frequency.
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 5be563c..fd76572 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -17,12 +17,6 @@
 #define CONFIG_ATSTK1000
/*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ				1000
-
-/*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
  * PLL frequency.
diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h
index a49d0ad..2562460 100644
--- a/include/configs/atstk1003.h
+++ b/include/configs/atstk1003.h
@@ -17,12 +17,6 @@
 #define CONFIG_ATSTK1000
/*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ				1000
-
-/*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
  * PLL frequency.
diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h
index 7f3976c..8e32a10 100644
--- a/include/configs/atstk1004.h
+++ b/include/configs/atstk1004.h
@@ -17,12 +17,6 @@
 #define CONFIG_ATSTK1000
/*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ				1000
-
-/*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
  * PLL frequency.
diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h
index 97470df..9ce2264 100644
--- a/include/configs/atstk1006.h
+++ b/include/configs/atstk1006.h
@@ -16,11 +16,6 @@
 #define CONFIG_ATSTK1006
 #define CONFIG_ATSTK1000
-/*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ				1000
/*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
diff --git a/include/configs/calimain.h b/include/configs/calimain.h
index d20074c..febee45 100644
--- a/include/configs/calimain.h
+++ b/include/configs/calimain.h
@@ -31,7 +31,6 @@
 #define CONFIG_SYS_OSCIN_FREQ		calimain_get_osc_freq()
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_TEXT_BASE		0x60000000
 #define CONFIG_DA850_LOWLEVEL
 #define CONFIG_SYS_DA850_PLL_INIT
diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h
index ac7ed81..7e221f6 100644
--- a/include/configs/cam_enc_4xx.h
+++ b/include/configs/cam_enc_4xx.h
@@ -17,7 +17,6 @@
 #define CONFIG_ARM926EJS				/* arm926ejs CPU */
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK		24000000	/* timer0 freq */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SOC_DM365
#define CONFIG_MACH_TYPE	MACH_TYPE_DAVINCI_DM365_EVM
diff --git a/include/configs/canmb.h b/include/configs/canmb.h
index 7b90dcb..949202b 100644
--- a/include/configs/canmb.h
+++ b/include/configs/canmb.h
@@ -189,8 +189,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x200000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_RTC_MPC5200	1	/* use internal MPC5200 RTC */
#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h
index 5cf456a..d5db8f5 100644
--- a/include/configs/cgtqmx6eval.h
+++ b/include/configs/cgtqmx6eval.h
@@ -143,7 +143,6 @@
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
#define CONFIG_SYS_LOAD_ADDR	       CONFIG_LOADADDR
-#define CONFIG_SYS_HZ		       1000
#define CONFIG_CMDLINE_EDITING
diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h
index b401995..275024b 100644
--- a/include/configs/cm4008.h
+++ b/include/configs/cm4008.h
@@ -75,8 +75,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x00008000	/* default load address */
-#define CONFIG_SYS_HZ			(1000)		/* 1ms resolution ticks */
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h
index d792240..458e3c4 100644
--- a/include/configs/cm41xx.h
+++ b/include/configs/cm41xx.h
@@ -75,8 +75,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x00008000	/* default load address */
-#define CONFIG_SYS_HZ			(1000)		/* 1ms resolution ticks */
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h
index cfd63ad..17deafd 100644
--- a/include/configs/cm5200.h
+++ b/include/configs/cm5200.h
@@ -296,7 +296,6 @@
 #define CONFIG_LOOPW		1
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
/*
  * Various low-level settings
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index bc5b66c..38fe064 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -258,7 +258,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index 885dfd4..26ccf01 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -37,11 +37,9 @@
 /* ---
  * Defines processor clock - important for correct timings concerning serial
  * interface etc.
- * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms
  * ---
  */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CLK			66000000
 #define CONFIG_SYS_SDRAM_SIZE		16		/* SDRAM size in MB */
diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h
index c6aad01..92d25e0 100644
--- a/include/configs/controlcenterd.h
+++ b/include/configs/controlcenterd.h
@@ -440,7 +440,6 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_HW_WATCHDOG
 #define CONFIG_LOADS_ECHO
 #define CONFIG_SYS_LOADS_BAUD_CHANGE
diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index c2dcef8..32c7314 100644
--- a/include/configs/coreboot.h
+++ b/include/configs/coreboot.h
@@ -221,7 +221,6 @@
 #define CONFIG_SYS_MEMTEST_START		0x00100000
 #define CONFIG_SYS_MEMTEST_END			0x01000000
 #define CONFIG_SYS_LOAD_ADDR			0x100000
-#define CONFIG_SYS_HZ				1000
/*-----------------------------------------------------------------------
  * SDRAM Configuration
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index c3fb80c..2d2a853 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -662,7 +662,6 @@
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index 05529c8..8a6fdcd 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -268,8 +268,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h
index 5b79ace..021be83 100644
--- a/include/configs/cpu9260.h
+++ b/include/configs/cpu9260.h
@@ -20,7 +20,6 @@
 #define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
#define CONFIG_SYS_AT91_MAIN_CLOCK	18432000
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
#if defined(CONFIG_CPU9G20)
diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h
index c56fdd7..555cc55 100644
--- a/include/configs/cpuat91.h
+++ b/include/configs/cpuat91.h
@@ -25,7 +25,6 @@
 #define AT91C_MAIN_CLOCK		((AT91C_XTAL_CLOCK / 4) * 39)
 #define AT91C_MASTER_CLOCK		(AT91C_MAIN_CLOCK / 3)
 #define CONFIG_SYS_HZ_CLOCK		(AT91C_MASTER_CLOCK / 2)
-#define CONFIG_SYS_HZ			1000
#define CONFIG_ARM920T
 #define CONFIG_AT91RM9200
diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h
index 3e71ae5..c4cc62e 100644
--- a/include/configs/da830evm.h
+++ b/include/configs/da830evm.h
@@ -28,7 +28,6 @@
 #define CONFIG_SYS_OSCIN_FREQ		24000000
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_TEXT_BASE		0xc1080000
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index e63d7c4..503e96e 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -33,7 +33,6 @@
 #define CONFIG_SYS_OSCIN_FREQ		24000000
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_DA850_PLL_INIT
 #define CONFIG_SYS_DA850_DDR_INIT
diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h
index 96d35c5..b75371e 100644
--- a/include/configs/davinci_dm355evm.h
+++ b/include/configs/davinci_dm355evm.h
@@ -18,7 +18,6 @@
 #define CONFIG_ARM926EJS				/* arm926ejs CPU */
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK		24000000	/* timer0 freq */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SOC_DM355
/* Memory Info */
diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h
index f7adbd8..234bbc0 100644
--- a/include/configs/davinci_dm355leopard.h
+++ b/include/configs/davinci_dm355leopard.h
@@ -17,7 +17,6 @@
 #define CONFIG_ARM926EJS				/* arm926ejs CPU */
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK		24000000	/* timer0 freq */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SOC_DM355				/* DM355 based board */
/* Memory Info */
diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h
index 82dc1a2..b631154 100644
--- a/include/configs/davinci_dm365evm.h
+++ b/include/configs/davinci_dm365evm.h
@@ -18,7 +18,6 @@
 #define CONFIG_ARM926EJS				/* arm926ejs CPU */
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK		24000000	/* timer0 freq */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SOC_DM365
/* Memory Info */
diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h
index 7f57877..2132342 100644
--- a/include/configs/davinci_dm6467evm.h
+++ b/include/configs/davinci_dm6467evm.h
@@ -27,7 +27,6 @@ extern unsigned int davinci_arm_clk_get(void);
 /* Timer Input clock freq */
 #define CONFIG_SYS_HZ_CLOCK		(CONFIG_SYS_CLK_FREQ/2)
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SOC_DM646X
/* EEPROM definitions for EEPROM */
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index a49a989..db112e7 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -44,7 +44,6 @@
 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK		27000000	/* Timer Input clock freq */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SOC_DM644X
 /*====================================================*/
 /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index 1595bc7..18853bd 100644
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -22,7 +22,6 @@
 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK		27000000	/* Timer Input clock freq */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SOC_DM644X
 /*=============*/
 /* Memory Info */
diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h
index 6ebbe81..44449df 100644
--- a/include/configs/davinci_sffsdr.h
+++ b/include/configs/davinci_sffsdr.h
@@ -19,7 +19,6 @@
 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK		27000000	/* Timer Input clock freq */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SOC_DM644X
 /* EEPROM definitions for Atmel 24LC64 EEPROM chip */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
index 3eaa7c0..3f5ae6e 100644
--- a/include/configs/davinci_sonata.h
+++ b/include/configs/davinci_sonata.h
@@ -46,7 +46,6 @@
 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK		27000000	/* Timer Input clock freq */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SOC_DM644X
 /*====================================================*/
 /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h
index 07c60ab..da4ff8e 100644
--- a/include/configs/dbau1x00.h
+++ b/include/configs/dbau1x00.h
@@ -133,8 +133,6 @@
#define CONFIG_SYS_MIPS_TIMER_FREQ	(CONFIG_SYS_MHZ * 1000000)
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_SYS_SDRAM_BASE		0x80000000     /* Cached addr */
#define	CONFIG_SYS_LOAD_ADDR		0x81000000     /* default load address	*/
diff --git a/include/configs/debris.h b/include/configs/debris.h
index c9fb8d7..d74a541 100644
--- a/include/configs/debris.h
+++ b/include/configs/debris.h
@@ -149,7 +149,6 @@
 #define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 #define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address		*/
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
/*-----------------------------------------------------------------------
  * PCI stuff
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index cb79b4e..5fd9ccb 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -257,7 +257,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/*  Physical Memory Map  */
 #define CONFIG_NR_DRAM_BANKS		2 /* CS1 may or may not be populated */
diff --git a/include/configs/dig297.h b/include/configs/dig297.h
index 30e3908..6b3a71a 100644
--- a/include/configs/dig297.h
+++ b/include/configs/dig297.h
@@ -239,7 +239,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h
index a5215db..02b7f99 100644
--- a/include/configs/digsy_mtc.h
+++ b/include/configs/digsy_mtc.h
@@ -416,8 +416,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x00100000
-#define CONFIG_SYS_HZ			1000
-
 /*
  * Various low-level settings
  */
diff --git a/include/configs/dvlhost.h b/include/configs/dvlhost.h
index 1418795..3b86de2 100644
--- a/include/configs/dvlhost.h
+++ b/include/configs/dvlhost.h
@@ -78,7 +78,6 @@
/* timer clock - 2* OSC_IN system clock */
 #define CONFIG_IXP425_TIMER_CLK         66666666
-#define CONFIG_SYS_HZ			1000
/* default load address */
 #define CONFIG_SYS_LOAD_ADDR		0x00010000
diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h
index c2d04a2..12c5635 100644
--- a/include/configs/eXalion.h
+++ b/include/configs/eXalion.h
@@ -217,7 +217,6 @@
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
  */
-#define CONFIG_SYS_HZ			1000
#define CONFIG_SYS_CLK_FREQ	33333333	/* external frequency to pll	*/
 #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER  2	/* for MPC8240 only		*/
diff --git a/include/configs/ea20.h b/include/configs/ea20.h
index e08423a..58e40ed 100644
--- a/include/configs/ea20.h
+++ b/include/configs/ea20.h
@@ -35,7 +35,6 @@
 #define CONFIG_SYS_OSCIN_FREQ		24000000
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_TEXT_BASE		0xc1080000
 #define CONFIG_DA8XX_GPIO
diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h
index 08ba883..d1650ee 100644
--- a/include/configs/eb_cpu5282.h
+++ b/include/configs/eb_cpu5282.h
@@ -98,7 +98,6 @@
 /*----------------------------------------------------------------------*
  * Clock and PLL Configuration						*
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_HZ			1000
 #define	CONFIG_SYS_CLK			80000000      /* 8MHz * 8 */
/* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index 247e37b..8fd2f93 100644
--- a/include/configs/eb_cpux9k2.h
+++ b/include/configs/eb_cpux9k2.h
@@ -59,7 +59,6 @@
#define AT91C_MAIN_CLOCK	179404800	/* from 12.288 MHz * 73 / 5 */
 #define AT91C_MASTER_CLOCK	(AT91C_MAIN_CLOCK / 3)
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_SYS_HZ_CLOCK 	(AT91C_MASTER_CLOCK / 2)
#define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock */
diff --git a/include/configs/ecovec.h b/include/configs/ecovec.h
index 2c9594b..f84550f 100644
--- a/include/configs/ecovec.h
+++ b/include/configs/ecovec.h
@@ -180,6 +180,5 @@
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ 41666666
 #define CONFIG_SYS_TMU_CLK_DIV      4
-#define CONFIG_SYS_HZ       1000
#endif	/* __ECOVEC_H */
diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index 9c70109..8b9f66a 100644
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -34,8 +34,6 @@
  * CLKs configurations
  */
-#define CONFIG_SYS_HZ		1000
-
 /*
  * Board-specific values for Orion5x MPP low level init:
  * - MPPs 12 to 15 are SATA LEDs (mode 5)
diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h
index 90033fa..726bbad 100644
--- a/include/configs/enbw_cmc.h
+++ b/include/configs/enbw_cmc.h
@@ -33,7 +33,6 @@
 #define CONFIG_SYS_OSCIN_FREQ		24000000
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_DA850_LOWLEVEL
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_SYS_DA850_PLL_INIT
diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h
index 32d5cd6..421c066 100644
--- a/include/configs/ep8248.h
+++ b/include/configs/ep8248.h
@@ -154,8 +154,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_SYS_FLASH_BASE		0xFF800000
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index aba3392..e072e32 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -359,8 +359,6 @@
#define CONFIG_SYS_LOAD_ADDR     0x00100000   /* default load address */
-#define CONFIG_SYS_HZ            1000         /* decrementer freq: 1 ms ticks */
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index bcf01b6..4778a01 100644
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -165,8 +165,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
/*-----------------------------------------------------------------------
diff --git a/include/configs/espt.h b/include/configs/espt.h
index e906efb..84377f5 100644
--- a/include/configs/espt.h
+++ b/include/configs/espt.h
@@ -99,7 +99,6 @@
 /* Clock */
 #define CONFIG_SYS_CLK_FREQ	66666666
 #define CONFIG_SYS_TMU_CLK_DIV      4
-#define CONFIG_SYS_HZ       1000
/* Ether */
 #define CONFIG_SH_ETHER 1
diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index adf14be..5d33c76 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -31,7 +31,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768	/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000 /* 18.432 MHz crystal */
-#define CONFIG_SYS_HZ			1000
/* 32kB internal SRAM */
 #define CONFIG_SRAM_BASE	0x00300000 /*AT91SAM9XE_SRAM_BASE */
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 8f8f85f..fe13f08 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -177,8 +177,6 @@
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5E00000)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_RD_LVL
#define CONFIG_NR_DRAM_BANKS	8
diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h
index 14f0784..fc015e6 100644
--- a/include/configs/favr-32-ezkit.h
+++ b/include/configs/favr-32-ezkit.h
@@ -18,12 +18,6 @@
 #define CONFIG_FAVR32_EZKIT_EXT_FLASH
/*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ				1000
-
-/*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
  * PLL frequency.
diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index cfcaf1b..531ace3 100644
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -130,8 +130,6 @@
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ				1000
-
 /*
  * Physical Memory Map
  */
diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h
index 47e65d8..29905c2 100644
--- a/include/configs/galaxy5200.h
+++ b/include/configs/galaxy5200.h
@@ -352,7 +352,6 @@
 #define CONFIG_SYS_MEMTEST_END 0x00f00000	/* 1 ... 15 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR 0x400000		/* default load address */
-#define CONFIG_SYS_HZ 1000			/* decrementer freq: 1 ms ticks */
#define CONFIG_DISPLAY_BOARDINFO 1
diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h
index 4f286bd..38cab12 100644
--- a/include/configs/gr_cpci_ax2000.h
+++ b/include/configs/gr_cpci_ax2000.h
@@ -304,8 +304,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Various low-level settings
  */
diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h
index fac7f1c..ba3e45a 100644
--- a/include/configs/gr_ep2s60.h
+++ b/include/configs/gr_ep2s60.h
@@ -293,8 +293,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*-----------------------------------------------------------------------
  * USB stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h
index 7f0c5be..af7ec11 100644
--- a/include/configs/gr_xc3s_1500.h
+++ b/include/configs/gr_xc3s_1500.h
@@ -252,8 +252,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Various low-level settings
  */
diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h
index c288b39..938ee86 100644
--- a/include/configs/grasshopper.h
+++ b/include/configs/grasshopper.h
@@ -16,12 +16,6 @@
 #define CONFIG_AT32AP7000
/*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ			1000
-
-/*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
  * PLL frequency.
diff --git a/include/configs/grsim.h b/include/configs/grsim.h
index 6124519..9bbbded 100644
--- a/include/configs/grsim.h
+++ b/include/configs/grsim.h
@@ -279,8 +279,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /***** Gaisler GRLIB IP-Cores Config ********/
/* AMBA Plug & Play info display on startup */
diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h
index 2226f5b..d387af9 100644
--- a/include/configs/grsim_leon2.h
+++ b/include/configs/grsim_leon2.h
@@ -277,8 +277,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /***** Gaisler GRLIB IP-Cores Config ********/
#define CONFIG_SYS_GRLIB_SDRAM    0
diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h
index 545fa85..dffed3e 100644
--- a/include/configs/gw8260.h
+++ b/include/configs/gw8260.h
@@ -352,7 +352,6 @@
 #define CONFIG_CLOCKS_IN_MHZ
#define CONFIG_SYS_LOAD_ADDR   0x100000 /* default load address */
-#define CONFIG_SYS_HZ          1000     /* decrementer freq: 1 ms ticks */
/* memtest works from the end of the exception vector table
diff --git a/include/configs/h2200.h b/include/configs/h2200.h
index 19ecc9a..d026484 100644
--- a/include/configs/h2200.h
+++ b/include/configs/h2200.h
@@ -17,8 +17,6 @@
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM_1			0xa0000000 /* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE		0x04000000 /* 64 MB */
diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h
index 38c70ac..3f2fadb 100644
--- a/include/configs/hammerhead.h
+++ b/include/configs/hammerhead.h
@@ -13,8 +13,6 @@
 #define CONFIG_AT32AP7000
 #define CONFIG_HAMMERHEAD
-#define CONFIG_SYS_HZ				1000
-
 /*
  * Set up the PLL to run at 125 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h
index b8197ac..73e1624 100644
--- a/include/configs/hawkboard.h
+++ b/include/configs/hawkboard.h
@@ -28,7 +28,6 @@
 #define CONFIG_SYS_OSCIN_FREQ		24000000
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_AIS_CONFIG_FILE		"board/$(BOARDDIR)/hawkboard-ais-nand.cfg"
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index a5743d6..24f9350 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -12,8 +12,6 @@
 #define CONFIG_SYS_THUMB_BUILD
#define CONFIG_SYS_NO_FLASH
-#define CFG_HZ				1000
-#define CONFIG_SYS_HZ			CFG_HZ
#define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index 747c43c..475d3ff 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -237,8 +237,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Enable loopw command.
  */
diff --git a/include/configs/igep0033.h b/include/configs/igep0033.h
index 3e18a65..2c69d4e 100644
--- a/include/configs/igep0033.h
+++ b/include/configs/igep0033.h
@@ -144,7 +144,6 @@
 /* Platform/Board specific defs */
 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000	/* 1ms clock */
/* NS16550 Configuration */
 #define CONFIG_SYS_NS16550
diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h
index 722c566..a22dc77 100644
--- a/include/configs/igep00x0.h
+++ b/include/configs/igep00x0.h
@@ -237,7 +237,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/*
  * Physical Memory Map
diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h
index ae6828b..ad1614a 100644
--- a/include/configs/ima3-mx53.h
+++ b/include/configs/ima3-mx53.h
@@ -111,7 +111,6 @@
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_CMDLINE_EDITING
/* Physical Memory Map */
diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
index cda7e0d..8236133 100644
--- a/include/configs/imx27lite-common.h
+++ b/include/configs/imx27lite-common.h
@@ -16,7 +16,6 @@
 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
 #define CONFIG_MX27
 #define CONFIG_MX27_CLK32	32768		/* OSC32K frequency */
-#define CONFIG_SYS_HZ		1000
#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_DISPLAY_CPUINFO
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index 30c65da..9bdfbe4 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -117,8 +117,6 @@
#define CONFIG_SYS_LOAD_ADDR		0 /* default load address */
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_CMDLINE_EDITING	1
/*-----------------------------------------------------------------------
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 720e1bf..a7dab58 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -121,8 +121,6 @@
#define CONFIG_SYS_LOAD_ADDR		0 /* default load address */
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_CMDLINE_EDITING
/*
diff --git a/include/configs/incaip.h b/include/configs/incaip.h
index 0ff9a7f..7d2715d 100644
--- a/include/configs/incaip.h
+++ b/include/configs/incaip.h
@@ -106,8 +106,6 @@
#define CONFIG_SYS_MIPS_TIMER_FREQ	(incaip_get_cpuclk() / 2)
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
#define	CONFIG_SYS_LOAD_ADDR		0x80100000	/* default load address	*/
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index 5cc686f..363f2cd 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -348,8 +348,6 @@ static inline void tws_data_config_output(unsigned output)
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Enable loopw command.
  */
diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h
index 910c243..00f9004 100644
--- a/include/configs/integrator-common.h
+++ b/include/configs/integrator-common.h
@@ -12,7 +12,6 @@
 #define CONFIG_SYS_TEXT_BASE		0x01000000
 #define CONFIG_SYS_MEMTEST_START	0x100000
 #define CONFIG_SYS_MEMTEST_END		0x10000000
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_TIMERBASE		0x13000100	/* Timer1 */
 #define CONFIG_SYS_LOAD_ADDR		0x7fc0	/* default load address */
 #define CONFIG_SYS_LONGHELP
diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h
index 82d4298..3b5a1cd 100644
--- a/include/configs/ipam390.h
+++ b/include/configs/ipam390.h
@@ -33,7 +33,6 @@
 #define CONFIG_SYS_OSCIN_FREQ		24000000
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_DA850_PLL_INIT
 #define CONFIG_SYS_DA850_DDR_INIT
 #define CONFIG_SYS_TEXT_BASE		0xc1080000
diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h
index 50fd995..505ba24 100644
--- a/include/configs/ipek01.h
+++ b/include/configs/ipek01.h
@@ -297,7 +297,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000 /* default load address */
-#define CONFIG_SYS_HZ			1000 /* decrementer freq: 1 ms ticks */
 #define CONFIG_LOOPW
/*
diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h
index d0609f6..b34e342 100644
--- a/include/configs/jadecpu.h
+++ b/include/configs/jadecpu.h
@@ -12,7 +12,6 @@
#define CONFIG_MB86R0x
 #define CONFIG_MB86R0x_IOCLK	get_bus_freq(0)
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_SYS_TEXT_BASE	0x10000000
#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
diff --git a/include/configs/jornada.h b/include/configs/jornada.h
index 71f1e72..7e18d8e 100644
--- a/include/configs/jornada.h
+++ b/include/configs/jornada.h
@@ -70,7 +70,6 @@
 #define CONFIG_SYS_BARGSIZE		256	/* Boot Argument Buffer Size */
 #define CONFIG_SYS_MEMTEST_START	0xc0040000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0xc2000000	/* 4..128 MB */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CPUSPEED		0x0a /* core clock 206MHz */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 19200, 38400, 57600, 115200 }
diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h
index 01c087b..94e166e 100644
--- a/include/configs/jupiter.h
+++ b/include/configs/jupiter.h
@@ -262,8 +262,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x200000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index a82987d..c4735f8 100644
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -54,8 +54,6 @@
#define CONFIG_SYS_ALT_MEMTEST		/* memory test, takes time */
-#define CONFIG_SYS_HZ			1000	/* decr. freq: 1 ms ticks */
-
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
diff --git a/include/configs/korat.h b/include/configs/korat.h
index 7c7a305..5beac50 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -324,8 +324,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
 #define CONFIG_SYS_EXTBDINFO		1  /* To use extended board_into (bd_t)	*/
-#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW		1	/* enable loopw command		*/
 #define CONFIG_MX_CYCLIC	1	/* enable mdc/mwc commands	*/
diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h
index 5485a42..92d906c 100644
--- a/include/configs/kvme080.h
+++ b/include/configs/kvme080.h
@@ -96,7 +96,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x07C00000
#define CONFIG_SYS_LOAD_ADDR		0x00100000
-#define CONFIG_SYS_HZ			1000
#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE	0x1000
diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h
index 222725c..9f0cd56 100644
--- a/include/configs/kzm9g.h
+++ b/include/configs/kzm9g.h
@@ -126,8 +126,6 @@
 #define CONFIG_SYS_CLK_FREQ	(48000000)
 #define CONFIG_SYS_CPU_CLK	(1196000000)
 #define TMU_CLK_DIVIDER		(4)	/* 4 (default), 16, 64, 256 or 1024 */
-#define CFG_HZ              (1000)
-#define CONFIG_SYS_HZ		CFG_HZ
/* Ether */
 #define CONFIG_NET_MULTI
diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h
index 932dac3..31ebabb 100644
--- a/include/configs/linkstation.h
+++ b/include/configs/linkstation.h
@@ -306,7 +306,6 @@
 /* FIXME: 32.768 MHz is the crystal frequency but */
 /* the real frequency is lower by about 0.75%     */
 #define CONFIG_SYS_CLK_FREQ	32768000
-#define CONFIG_SYS_HZ			1000
/* Bit-field values for MCCR1.  */
 #define CONFIG_SYS_ROMNAL      0
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index 08d633b..36769e5 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -111,7 +111,6 @@
#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CPUSPEED		0x161		/* set core clock to 400/200/100 MHz */
#ifdef CONFIG_MMC
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index 459c047..3feb261 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -213,8 +213,6 @@
#define CONFIG_SYS_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * When the watchdog is enabled, output must be fast enough in Linux.
  */
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 8f5eb95..248359f 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -482,8 +482,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h
index ccb07e3..b0bb31b 100644
--- a/include/configs/m53evk.h
+++ b/include/configs/m53evk.h
@@ -10,7 +10,6 @@
#define CONFIG_MX53
 #define CONFIG_MXC_GPIO
-#define CONFIG_SYS_HZ		1000
#include <asm/arch/imx-regs.h>
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index 487574f..b46d180 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -303,8 +303,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 5e27ab2..4619dfb 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -303,7 +303,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/*
  * Physical Memory Map
diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index b48872b..9aec2d3 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -343,8 +343,6 @@
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 601bb79..e01b9cd 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -250,8 +250,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index d2ec83c..18f5262 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -40,7 +40,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768	/* 32.768 kHz crystal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	16000000/* 16.0 MHz crystal */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq */
/* Misc CPU related */
 #define CONFIG_SKIP_LOWLEVEL_INIT
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 0e3de77..aa8d59d 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -399,7 +399,6 @@
/* architecture dependent code */
 #define	CONFIG_SYS_USR_EXCEP	/* user exception */
-#define CONFIG_SYS_HZ	1000
#define	CONFIG_PREBOOT	"echo U-BOOT for ${hostname};setenv preboot;echo"
diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h
index 82f653e..3d79239 100644
--- a/include/configs/mimc200.h
+++ b/include/configs/mimc200.h
@@ -17,8 +17,6 @@
#define CONFIG_MIMC200_EXT_FLASH
-#define CONFIG_SYS_HZ				1000
-
 /*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index d7383a6..efaf8b6 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -380,8 +380,6 @@ extern void __led_set(led_id_t id, int state);
#define CONFIG_SYS_LOAD_ADDR		0x200000	/* default kernel load addr */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Various low-level settings
  */
diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 85ae367..6c62ea1 100644
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -498,7 +498,6 @@
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index f8c4627..6358526 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -187,8 +187,6 @@
#define CONFIG_SYS_LOAD_ADDR	0x00400000	/* default load address */
-#define CONFIG_SYS_HZ		1000		/* decr freq: 1ms ticks */
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h
index 6875cf4..da5dc06 100644
--- a/include/configs/mpc8308_p1m.h
+++ b/include/configs/mpc8308_p1m.h
@@ -421,7 +421,6 @@
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h
index 55d93da..6d0d392 100644
--- a/include/configs/mpq101.h
+++ b/include/configs/mpq101.h
@@ -334,7 +334,6 @@
#define CONFIG_SYS_MAXARGS  16                /* max number of command args */
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ       1000              /* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h
index 7e18723..3a56539 100644
--- a/include/configs/mpr2.h
+++ b/include/configs/mpr2.h
@@ -68,7 +68,6 @@
 /* Clocks */
 #define CONFIG_SYS_CLK_FREQ	24000000
 #define CONFIG_SYS_TMU_CLK_DIV		4	/* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ		1000
/* UART */
 #define CONFIG_SCIF_CONSOLE	1
diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h
index bc8bb8d..ed4197a 100644
--- a/include/configs/ms7720se.h
+++ b/include/configs/ms7720se.h
@@ -86,7 +86,6 @@
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define CONFIG_SYS_TMU_CLK_DIV		4	/* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ		1000
/* PCMCIA */
 #define CONFIG_IDE_PCMCIA	1
diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
index a757737..b75a847 100644
--- a/include/configs/ms7722se.h
+++ b/include/configs/ms7722se.h
@@ -112,6 +112,5 @@
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define CONFIG_SYS_TMU_CLK_DIV		(4)	/* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ		1000
#endif	/* __MS7722SE_H */
diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h
index c4c96bf..439b888 100644
--- a/include/configs/ms7750se.h
+++ b/include/configs/ms7750se.h
@@ -83,6 +83,5 @@
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define CONFIG_SYS_TMU_CLK_DIV		4
-#define CONFIG_SYS_HZ		1000
#endif /* __MS7750SE_H */
diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h
index 950d71b..2816bcb 100644
--- a/include/configs/muas3001.h
+++ b/include/configs/muas3001.h
@@ -196,8 +196,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_SYS_SDRAM_BASE		0x00000000
diff --git a/include/configs/munices.h b/include/configs/munices.h
index 7700a1d..c50c647 100644
--- a/include/configs/munices.h
+++ b/include/configs/munices.h
@@ -176,7 +176,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
#define CONFIG_SYS_LOAD_ADDR		0x200000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
#define CONFIG_DISPLAY_BOARDINFO 1
 #define CONFIG_CMDLINE_EDITING  1
diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h
index c458dd9..721b75d 100644
--- a/include/configs/mv-common.h
+++ b/include/configs/mv-common.h
@@ -35,7 +35,6 @@
 /*
  * CLKs configurations
  */
-#define CONFIG_SYS_HZ		1000
/*
  * NS16550 Configuration
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index 4de4324..f4acb7e 100644
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -114,7 +114,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0AF00000	/* 63 MB in DRAM	*/
#define CONFIG_SYS_LOAD_ADDR		0x08800000	/* default load address */
-/*#define	CONFIG_SYS_HZ			1000 */
 #define CONFIG_SYS_HZ			3686400
 #define CONFIG_SYS_CPUSPEED		0x141
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index 543c415..ccd3b6c 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -12,7 +12,6 @@
 /* High Level Configuration Options */
#define CONFIG_MX25
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_TEXT_BASE		0x81200000
 #define CONFIG_MXC_GPIO
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index b1b6852..3bbc40b 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -135,8 +135,6 @@
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_CMDLINE_EDITING	1
/*-----------------------------------------------------------------------
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 69045da..c1ca9b5 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -137,8 +137,6 @@
 /* default load address */
 #define CONFIG_SYS_LOAD_ADDR		0x81000000
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_CMDLINE_EDITING
/*-----------------------------------------------------------------------
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 68b225a..d712fe7 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -155,8 +155,6 @@
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ				1000
-
 /*
  * Physical Memory Map
  */
diff --git a/include/configs/mx51_efikamx.h b/include/configs/mx51_efikamx.h
index f0c6776..1c99045 100644
--- a/include/configs/mx51_efikamx.h
+++ b/include/configs/mx51_efikamx.h
@@ -227,7 +227,6 @@
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_CMDLINE_EDITING
/*-----------------------------------------------------------------------
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 04f518a..10c7ee9 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -232,7 +232,6 @@
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_CMDLINE_EDITING
/*-----------------------------------------------------------------------
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index 122ffd0..82ff3cc 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -200,7 +200,6 @@
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_CMDLINE_EDITING
/* Physical Memory Map */
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index d39ce7b..305455f 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -150,7 +150,6 @@
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_CMDLINE_EDITING
/* Physical Memory Map */
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 7237da5..d0bcb11 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -192,7 +192,6 @@
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_CMDLINE_EDITING
/* Physical Memory Map */
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index 7e4e1c9..d0f428d 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -135,7 +135,6 @@
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_CMDLINE_EDITING
/* Physical Memory Map */
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index 1c5c837..2c706b2 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -127,7 +127,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x10010000
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
#define CONFIG_CMDLINE_EDITING
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index bf6113b..f97a37c 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -185,7 +185,6 @@
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-#define CONFIG_SYS_HZ                  1000
#define CONFIG_CMDLINE_EDITING
 #define CONFIG_STACKSIZE               (128 * 1024)
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index ca8f2f6..3facf54 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -149,7 +149,6 @@
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + SZ_512M)
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
#define CONFIG_CMDLINE_EDITING
 #define CONFIG_STACKSIZE		SZ_128K
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index a684166..b124011 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -41,9 +41,6 @@
  * CPU specifics
  */
-/* Ticks per second */
-#define CONFIG_SYS_HZ		1000
-
 /* MXS uses FDT */
 #define CONFIG_OF_LIBFDT
diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h
index 0997f49..0377b58 100644
--- a/include/configs/nhk8815.h
+++ b/include/configs/nhk8815.h
@@ -76,7 +76,6 @@
 #define CONFIG_BOARD_LATE_INIT	/* call board_late_init during start up */
/* timing informazion */
-#define CONFIG_SYS_HZ		1000 /* Mandatory... */
 #define CONFIG_SYS_TIMERBASE	0x101E2000
/* serial port (PL011) configuration */
diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h
index b528f5a..66e0419 100644
--- a/include/configs/nios2-generic.h
+++ b/include/configs/nios2-generic.h
@@ -39,7 +39,6 @@
 #define CONFIG_SYS_LOW_RES_TIMER
 #define CONFIG_SYS_NIOS_TMRBASE	CONFIG_SYS_TIMER_BASE
 #define CONFIG_SYS_NIOS_TMRIRQ		CONFIG_SYS_TIMER_IRQ
-#define CONFIG_SYS_HZ			1000	/* Always 1000 */
 #define CONFIG_SYS_NIOS_TMRMS		10	/* Desired period (msec)*/
 #define CONFIG_SYS_NIOS_TMRCNT \
    (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_TIMER_FREQ / 1000) - 1)
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index 3454b86..2b26faf 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -299,7 +299,6 @@
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
#define CONFIG_SYS_LOAD_ADDR	       CONFIG_LOADADDR
-#define CONFIG_SYS_HZ		       1000
#define CONFIG_CMDLINE_EDITING
diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
index cfc5f12..f46357e 100644
--- a/include/configs/nokia_rx51.h
+++ b/include/configs/nokia_rx51.h
@@ -426,7 +426,6 @@ int rx51_kp_getc(void);
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/*
  * Stack sizes
diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h
index 90c45d5..029100f 100644
--- a/include/configs/o2dnt-common.h
+++ b/include/configs/o2dnt-common.h
@@ -332,7 +332,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x100000
/* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_HZ			1000
/*
  * Various low-level settings
diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h
index 1a7e5c7..2cb4df5 100644
--- a/include/configs/omap1510inn.h
+++ b/include/configs/omap1510inn.h
@@ -116,7 +116,6 @@
  */
 #define CONFIG_SYS_TIMERBASE	OMAP1510_TIMER1_BASE	/* use timer 1 */
 #define CONFIG_SYS_PTV		2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ		1000
/*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index c1245e7..32745c2 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -341,7 +341,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h
index edf6543..3eae288 100644
--- a/include/configs/omap3_evm_common.h
+++ b/include/configs/omap3_evm_common.h
@@ -35,7 +35,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/* Size of environment - 128KB */
 #define CONFIG_ENV_SIZE			(128 << 10)
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index ee6db51..d484bc0 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -265,7 +265,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/*
  * Physical Memory Map
diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h
index 0c88419..7dc1117 100644
--- a/include/configs/omap3_mvblx.h
+++ b/include/configs/omap3_mvblx.h
@@ -236,7 +236,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 88380a4..4641694 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -217,7 +217,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index 91a2568..a83aec3 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -201,7 +201,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
index a5e469c..087432a 100644
--- a/include/configs/omap3_sdp3430.h
+++ b/include/configs/omap3_sdp3430.h
@@ -273,7 +273,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index c747d52..ea7e818 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -228,7 +228,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index e9f2383..15f1f4d 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -220,7 +220,6 @@
 /* Use General purpose timer 1 */
 #define CONFIG_SYS_TIMERBASE		GPT2_BASE
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/*
  * SDRAM Memory Map
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index 75488de..a7b6b13 100644
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -118,7 +118,6 @@
  */
 #define CONFIG_SYS_TIMERBASE	0xFFFEC500	/* use timer 1 */
 #define CONFIG_SYS_PTV		7	/* 2^(PTV+1), divide by 256 */
-#define CONFIG_SYS_HZ		1000
/*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/openrisc-generic.h b/include/configs/openrisc-generic.h
index dfe0258..f295f02 100644
--- a/include/configs/openrisc-generic.h
+++ b/include/configs/openrisc-generic.h
@@ -55,7 +55,6 @@
 /*
  * TIMER
  */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_OPENRISC_TMR_HZ	100
/*
diff --git a/include/configs/origen.h b/include/configs/origen.h
index da13574..bad34b3 100644
--- a/include/configs/origen.h
+++ b/include/configs/origen.h
@@ -102,8 +102,6 @@
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x6000000)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-#define CONFIG_SYS_HZ			1000
-
 /* ORIGEN has 4 bank of DRAM */
 #define CONFIG_NR_DRAM_BANKS	4
 #define SDRAM_BANK_SIZE		(256UL << 20UL)	/* 256 MB */
diff --git a/include/configs/otc570.h b/include/configs/otc570.h
index 543209c..8578a1d 100644
--- a/include/configs/otc570.h
+++ b/include/configs/otc570.h
@@ -39,7 +39,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768	/* 32.768 kHz crystal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	16000000/* 16.0 MHz crystal */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq */
/* Misc CPU related */
 #define CONFIG_SKIP_LOWLEVEL_INIT
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 5f0c4fb..bae6f8d 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -834,7 +834,6 @@
    /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms tick */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h
index 4aa7064..0458ae8 100644
--- a/include/configs/p1_twr.h
+++ b/include/configs/p1_twr.h
@@ -482,7 +482,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
    /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms tick */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h
index d1c7a1a..5b5d501 100644
--- a/include/configs/p3mx.h
+++ b/include/configs/p3mx.h
@@ -284,8 +284,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x08000000	/* default load address */
-#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index c4c5093..c338ab8 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -213,8 +213,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h
index 2ab6fd2..20259f5 100644
--- a/include/configs/palmtreo680.h
+++ b/include/configs/palmtreo680.h
@@ -120,7 +120,6 @@
  * Clock Configuration
  */
 #undef  CONFIG_SYS_CLKS_IN_HZ
-#define CONFIG_SYS_HZ                   1000 /* decrementer freq: 1 ms ticks */
 #define CONFIG_SYS_CPUSPEED             0x210           /* 416MHz ; N=2,L=16 */
/*
diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h
index cab9192..e929b23 100644
--- a/include/configs/pb1x00.h
+++ b/include/configs/pb1x00.h
@@ -66,8 +66,6 @@
#define CONFIG_SYS_MIPS_TIMER_FREQ	396000000
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_SYS_SDRAM_BASE		0x80000000     /* Cached addr */
#define	CONFIG_SYS_LOAD_ADDR		0x81000000     /* default load address	*/
diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h
index a608c87..6b5a5d1 100644
--- a/include/configs/pcm030.h
+++ b/include/configs/pcm030.h
@@ -364,7 +364,6 @@ RTC configuration
 #define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_DISPLAY_BOARDINFO 1
diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
index e2b4de7..602e534 100644
--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -155,7 +155,6 @@
  /* Platform/Board specific defs */
 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000	/* 1ms clock */
#define CONFIG_CONS_INDEX		1
 /* NS16550 Configuration */
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 5de8e98..df4ac61 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -293,8 +293,6 @@
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 #define CONFIG_LYNXKDI          1       /* support kdi files            */
-#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks */
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h
index 5032119..232d123 100644
--- a/include/configs/pdm360ng.h
+++ b/include/configs/pdm360ng.h
@@ -417,7 +417,6 @@
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 /* Decrementer freq: 1ms ticks */
-#define CONFIG_SYS_HZ		1000
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
index c664010..852bd88 100644
--- a/include/configs/pdnb3.h
+++ b/include/configs/pdnb3.h
@@ -100,7 +100,6 @@
 #define CONFIG_SYS_LOAD_ADDR           0x00010000      /* default load address */
#define CONFIG_IXP425_TIMER_CLK		66666666
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
/***************************************************************
  * Platform/Board specific defines start here.
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index 027ddd2..d47a18d 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -254,8 +254,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 67b40b2..37c43f4 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -28,8 +28,6 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000
-#define CONFIG_SYS_HZ		1000
-
 #define CONFIG_SYS_AT91_CPU_NAME	"AT91SAM9261"
 #define CONFIG_PM9261		1	/* on a Ronetix PM9261 Board	*/
 #define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 2b4335e..eccc027 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -28,8 +28,6 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
-#define CONFIG_SYS_HZ		1000
-
 #define CONFIG_SYS_AT91_CPU_NAME	"AT91SAM9263"
 #define CONFIG_PM9263		1	/* on a Ronetix PM9263 Board	*/
 #define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 7d16bd8..51fe0be 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -31,7 +31,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000 /* from 12 MHz crystal */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_TEXT_BASE		0x73f00000
#define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h
index 3f9fdd4..3fa3cfd 100644
--- a/include/configs/ppmc7xx.h
+++ b/include/configs/ppmc7xx.h
@@ -363,7 +363,6 @@
  */
#define CONFIG_SYS_BUS_CLK		CONFIG_BUS_CLK
-#define CONFIG_SYS_HZ			1000
/*
diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h
index 7cf12ba..d7782ac 100644
--- a/include/configs/ppmc8260.h
+++ b/include/configs/ppmc8260.h
@@ -315,7 +315,6 @@
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	   */
#define CONFIG_SYS_LOAD_ADDR		0x140000   /* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
#define CONFIG_SYS_MEMTEST_START	0x2000	/* memtest works from the end of */
    				/* the exception vector table */
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index cd3dd76..2303215 100644
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -224,7 +224,6 @@
#define CONFIG_SYS_LOAD_ADDR		0xa0800000	/* default load address */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CPUSPEED		0x161		/* set core clock to 400/200/100 MHz */
#define RTC	1				/* enable 32KHz osc */
diff --git a/include/configs/qemu-malta.h b/include/configs/qemu-malta.h
index 4e7ad33..03514d1 100644
--- a/include/configs/qemu-malta.h
+++ b/include/configs/qemu-malta.h
@@ -25,7 +25,6 @@
  */
 #define CONFIG_SYS_MHZ			250	/* arbitrary value */
 #define CONFIG_SYS_MIPS_TIMER_FREQ	(CONFIG_SYS_MHZ * 1000000)
-#define CONFIG_SYS_HZ			1000
#define CONFIG_SYS_DCACHE_SIZE		16384	/* arbitrary value */
 #define CONFIG_SYS_ICACHE_SIZE		16384	/* arbitrary value */
diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h
index c3a69c5..dd3babb 100644
--- a/include/configs/qemu-mips.h
+++ b/include/configs/qemu-mips.h
@@ -106,8 +106,6 @@
#define CONFIG_SYS_MIPS_TIMER_FREQ	(CONFIG_SYS_MHZ * 1000000)
-#define CONFIG_SYS_HZ			1000
-
 /* Cached addr */
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h
index 7267a81..a1422fc 100644
--- a/include/configs/qemu-mips64.h
+++ b/include/configs/qemu-mips64.h
@@ -108,8 +108,6 @@
#define CONFIG_SYS_MIPS_TIMER_FREQ	(CONFIG_SYS_MHZ * 1000000)
-#define CONFIG_SYS_HZ			1000
-
 /* Cached addr */
 #define CONFIG_SYS_SDRAM_BASE		0xffffffff80000000
diff --git a/include/configs/qong.h b/include/configs/qong.h
index c57fddd..36d72cd 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -189,8 +189,6 @@
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_HUSH_PARSER			/* Use the HUSH parser */
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
index a51f2d4..fe5cadb 100644
--- a/include/configs/quad100hd.h
+++ b/include/configs/quad100hd.h
@@ -122,8 +122,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_info (bd_t) */
-#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
diff --git a/include/configs/quantum.h b/include/configs/quantum.h
index aaf97eb..c9ebe13 100644
--- a/include/configs/quantum.h
+++ b/include/configs/quantum.h
@@ -124,8 +124,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h
index 0804480..bc28292 100644
--- a/include/configs/r0p7734.h
+++ b/include/configs/r0p7734.h
@@ -165,6 +165,5 @@
 #define CONFIG_SYS_CLK_FREQ 44444444
 #endif
 #define CONFIG_SYS_TMU_CLK_DIV      4
-#define CONFIG_SYS_HZ       1000
#endif	/* __R0P7734_H */
diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
index 65dcffb..e6c1c27 100644
--- a/include/configs/r2dplus.h
+++ b/include/configs/r2dplus.h
@@ -78,7 +78,6 @@
  */
 #define CONFIG_SYS_CLK_FREQ	60000000
 #define CONFIG_SYS_TMU_CLK_DIV		4
-#define CONFIG_SYS_HZ		1000
 #define	CONFIG_SYS_PLL_SETTLING_TIME	100/* in us */
/*
diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index dd1caf1..6eacfb2 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -103,7 +103,6 @@
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define CONFIG_SYS_TMU_CLK_DIV		4
-#define CONFIG_SYS_HZ		1000
/* PCI Controller */
 #if defined(CONFIG_CMD_PCI)
diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h
index 216c6cb..0b7add7 100644
--- a/include/configs/rpi_b.h
+++ b/include/configs/rpi_b.h
@@ -30,9 +30,6 @@
  */
 #define CONFIG_MACH_TYPE		MACH_TYPE_BCM2708
-/* Timer */
-#define CONFIG_SYS_HZ			1000
-
 /* Memory layout */
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index d0fafd7..247b54b 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -170,8 +170,6 @@
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5000000)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x4000000)
-#define CONFIG_SYS_HZ			1000
-
 /* Goni has 3 banks of DRAM, but swap the bank */
 #define CONFIG_NR_DRAM_BANKS	3
 #define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE	/* OneDRAM Bank #0 */
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
index 97a4008..d9e4c56 100644
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -198,8 +198,6 @@
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5000000)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x4800000)
-#define CONFIG_SYS_HZ			1000
-
 /* Universal has 2 banks of DRAM */
 #define CONFIG_NR_DRAM_BANKS	2
 #define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE	/* LDDDR2 DMC 0 */
diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index d63d0c4..9a4fc6a 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -584,7 +584,6 @@
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	   */
#define CONFIG_SYS_LOAD_ADDR		0x400000   /* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
#define CONFIG_SYS_ALT_MEMTEST                 /* Select full-featured memory test */
 #define CONFIG_SYS_MEMTEST_START	0x2000	/* memtest works from the end of */
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index 10697d6..d1ce74e 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -20,7 +20,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
-#define CONFIG_SYS_HZ		        1000
#define CONFIG_AT91FAMILY
 #define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 4027030..e873568 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -66,8 +66,6 @@
 #define CONFIG_ENV_SIZE		8192
 #define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SYS_HZ			1000
-
 /* Memory things - we don't really want a memory test */
 #define CONFIG_SYS_LOAD_ADDR		0x00000000
 #define CONFIG_SYS_MEMTEST_START	0x00100000
diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h
index 4ba2242..1b07da4 100644
--- a/include/configs/sbc35_a9g20.h
+++ b/include/configs/sbc35_a9g20.h
@@ -26,7 +26,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12.000 MHz crystal */
-#define CONFIG_SYS_HZ		        1000
#define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index 072f97e..cfa083c 100644
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -146,8 +146,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_info (bd_t) */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_VERSION_VARIABLE	1	/* include version env variable */
#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index 6f912ed..593f178 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -451,7 +451,6 @@
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
    			/* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 84be524..e82e4b1 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -566,7 +566,6 @@
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index cf97db9..cda40d2 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -507,7 +507,6 @@
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/sh7752evb.h b/include/configs/sh7752evb.h
index fb4dc6f..af70aa8 100644
--- a/include/configs/sh7752evb.h
+++ b/include/configs/sh7752evb.h
@@ -133,5 +133,4 @@
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	48000000
 #define CONFIG_SYS_TMU_CLK_DIV	4
-#define CONFIG_SYS_HZ		1000
 #endif	/* __SH7752EVB_H */
diff --git a/include/configs/sh7757lcr.h b/include/configs/sh7757lcr.h
index af76f49..a3c7f25 100644
--- a/include/configs/sh7757lcr.h
+++ b/include/configs/sh7757lcr.h
@@ -141,5 +141,4 @@
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	48000000
 #define CONFIG_SYS_TMU_CLK_DIV	4
-#define CONFIG_SYS_HZ		1000
 #endif	/* __SH7757LCR_H */
diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h
index c1d33d8..f471b93 100644
--- a/include/configs/sh7763rdp.h
+++ b/include/configs/sh7763rdp.h
@@ -99,7 +99,6 @@
 /* Clock */
 #define CONFIG_SYS_CLK_FREQ	66666666
 #define CONFIG_SYS_TMU_CLK_DIV		(4)	/* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ		1000
/* Ether */
 #define CONFIG_SH_ETHER 1
diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h
index 04f1d22..4b6680e 100644
--- a/include/configs/sh7785lcr.h
+++ b/include/configs/sh7785lcr.h
@@ -173,6 +173,5 @@
 /* The SCIF used external clock. system clock only used timer. */
 #define CONFIG_SYS_CLK_FREQ	50000000
 #define CONFIG_SYS_TMU_CLK_DIV		4
-#define CONFIG_SYS_HZ		1000
#endif	/* __SH7785LCR_H */
diff --git a/include/configs/shmin.h b/include/configs/shmin.h
index 5fb7176..c4fd3cb 100644
--- a/include/configs/shmin.h
+++ b/include/configs/shmin.h
@@ -104,7 +104,6 @@
 #define CONFIG_SYS_CLK_FREQ 33333333
 #endif /* CONFIG_T_SH7706LSR */
 #define CONFIG_SYS_TMU_CLK_DIV	4
-#define CONFIG_SYS_HZ	1000
/* Network device */
 #define CONFIG_DRIVER_NE2000
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index b787270..a87444e 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -124,8 +124,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x30800000
-#define CONFIG_SYS_HZ			1000
-
 /* support additional compression methods */
 #define CONFIG_BZIP2
 #define CONFIG_LZO
diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index a572e62..2f5e0d6 100644
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -163,8 +163,6 @@
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5e00000)
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_HZ			1000
-
 /* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */
 #define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE	/* SDRAM Bank #1 */
diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h
index 0496661..e2e8efe 100644
--- a/include/configs/smdkv310.h
+++ b/include/configs/smdkv310.h
@@ -101,8 +101,6 @@
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x6000000)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-#define CONFIG_SYS_HZ			1000
-
 /* SMDKV310 has 4 bank of DRAM */
 #define CONFIG_NR_DRAM_BANKS	4
 #define SDRAM_BANK_SIZE		(512UL << 20UL)	/* 512 MB */
diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 17eb5f2..988b680 100644
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -20,7 +20,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000 /* External Crystal, in Hz */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
-#define CONFIG_SYS_HZ			1000
/* CPU */
 #define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/snowball.h b/include/configs/snowball.h
index edc426a..00d6fa5 100644
--- a/include/configs/snowball.h
+++ b/include/configs/snowball.h
@@ -27,7 +27,6 @@
#define CONFIG_SYS_MEMTEST_START	0x00000000
 #define CONFIG_SYS_MEMTEST_END	0x1FFFFFFF
-#define CONFIG_SYS_HZ		1000		/* must be 1000 */
/*-----------------------------------------------------------------------
  * Size of environment and malloc() pool
diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h
index b5a7a9a..450b5e6 100644
--- a/include/configs/socfpga_cyclone5.h
+++ b/include/configs/socfpga_cyclone5.h
@@ -24,7 +24,6 @@
 #define CONFIG_SYS_TEXT_BASE		0x08000040
 #define V_NS16550_CLK			1000000
 #define CONFIG_BAUDRATE			57600
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_TIMER_CLOCK_KHZ		2400
 #define CONFIG_SYS_LOAD_ADDR		0x7fc0
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index e73f9c1..143b7ad 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -354,7 +354,6 @@
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buf Size	*/
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks	*/
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
index c11c2b4..23f7ad7 100644
--- a/include/configs/spear-common.h
+++ b/include/configs/spear-common.h
@@ -47,7 +47,6 @@
 #define CONFIG_I2C_CHIPADDRESS			0x50
/* Timer, HZ specific defines */
-#define CONFIG_SYS_HZ				1000
/* Flash configuration */
 #if defined(CONFIG_FLASH_PNOR)
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index e91f5ae..1a5d0ba 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -402,8 +402,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
diff --git a/include/configs/stamp9g20.h b/include/configs/stamp9g20.h
index a997331..7d6f62b 100644
--- a/include/configs/stamp9g20.h
+++ b/include/configs/stamp9g20.h
@@ -35,7 +35,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000	/* 18.432MHz crystal */
-#define CONFIG_SYS_HZ			1000		/* 1ms resolution */
/* misc settings */
 #define CONFIG_CMDLINE_TAG		/* pass commandline to Kernel */
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index c7689a7..f742940 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -331,7 +331,6 @@
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 #define CONFIG_SYS_LOAD_ADDR	0x1000000	/* default load address */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index f5f7f54..10c0113 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -366,7 +366,6 @@
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 #define CONFIG_SYS_LOAD_ADDR	0x1000000	/* default load address */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index 3e82fc2..422e74b 100644
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -293,7 +293,6 @@
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks*/
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 60dd8ff..683bc54 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -169,7 +169,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/*
  * Physical Memory Map
diff --git a/include/configs/tb0229.h b/include/configs/tb0229.h
index a1b7720..c94f436 100644
--- a/include/configs/tb0229.h
+++ b/include/configs/tb0229.h
@@ -109,8 +109,6 @@
#define CONFIG_SYS_MIPS_TIMER_FREQ	(CPU_TCLOCK_RATE/4)
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
#define CONFIG_SYS_LOAD_ADDR		0x80400000	/* default load address */
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index ccd68a1..e75e8cc 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -111,8 +111,6 @@
 #define CONFIG_SYS_MEMTEST_START	(NV_PA_SDRC_CS0 + 0x600000)
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x100000)
-#define CONFIG_SYS_HZ			1000
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
index 2fc2c10..ba16b1c 100644
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -122,7 +122,6 @@
    				+ PHYS_DRAM_1_SIZE - (8 << 12))
#define CONFIG_SYS_LOAD_ADDR		0x81000000	/* Default */
-#define CONFIG_SYS_HZ			1000		/* 1ms clock */
#define CONFIG_OMAP_GPIO
 #define CONFIG_MMC
@@ -149,7 +148,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		0x4802E000
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/* NS16550 Configuration */
 #define CONFIG_SYS_NS16550
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index e90490c..b8c0d54 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -60,7 +60,6 @@
#undef  CONFIG_SYS_CLKS_IN_HZ
 #define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */
-#define CONFIG_SYS_HZ			1000	   /* 1ms clock */
#define CONFIG_CMD_ASKEN
 #define CONFIG_CMD_ECHO
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index e0ab691..0f8a99a 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -56,7 +56,6 @@
/* Timer information. */
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000	/* 1ms clock */
/* I2C IP block */
 #define CONFIG_I2C
diff --git a/include/configs/titanium.h b/include/configs/titanium.h
index 077e25e..bfb06a7 100644
--- a/include/configs/titanium.h
+++ b/include/configs/titanium.h
@@ -194,7 +194,6 @@
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
/* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1
diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h
index 27efa69..48fcb24 100644
--- a/include/configs/tnetv107x_evm.h
+++ b/include/configs/tnetv107x_evm.h
@@ -30,7 +30,6 @@
#define CONFIG_SYS_TIMERBASE		TNETV107X_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get_rate(TNETV107X_LPSC_TIMER0)
-#define CONFIG_SYS_HZ			1000
#define CONFIG_PLL_SYS_EXT_FREQ		25000000
 #define CONFIG_PLL_TDM_EXT_FREQ		19200000
diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h
index f841ba8..32f6b00 100644
--- a/include/configs/tny_a9260.h
+++ b/include/configs/tny_a9260.h
@@ -40,7 +40,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12 MHz crystal */
-#define CONFIG_SYS_HZ		        1000
#define CONFIG_ARCH_CPU_INIT
 #define CONFIG_CMDLINE_TAG	        /* enable passing of ATAGs	*/
diff --git a/include/configs/top9000.h b/include/configs/top9000.h
index 65dabde..bf341d8 100644
--- a/include/configs/top9000.h
+++ b/include/configs/top9000.h
@@ -51,7 +51,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000	/* main clock xtal */
-#define CONFIG_SYS_HZ			1000
/* Misc CPU related */
 #define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/trats.h b/include/configs/trats.h
index 24ea06b..f67ae57 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -218,8 +218,6 @@
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5000000)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x4800000)
-#define CONFIG_SYS_HZ			1000
-
 /* TRATS has 4 banks of DRAM */
 #define CONFIG_NR_DRAM_BANKS	4
 #define SDRAM_BANK_SIZE		(256UL << 20UL)	/* 256 MB */
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index a9b2714..c72aff7 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -227,7 +227,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
/*  Physical Memory Map  */
 #define CONFIG_NR_DRAM_BANKS		2 /* CS1 may or may not be populated */
diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index c7c6952..00b0f3f 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -150,7 +150,6 @@
#define CONFIG_SYS_LOAD_ADDR		0xa1000000	/* default load address */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CPUSPEED		0x207		/* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
#ifdef CONFIG_MMC
diff --git a/include/configs/tt01.h b/include/configs/tt01.h
index a755d52..8f766a5 100644
--- a/include/configs/tt01.h
+++ b/include/configs/tt01.h
@@ -239,8 +239,6 @@
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_CMDLINE_EDITING
/* MMC boot support */
diff --git a/include/configs/tx25.h b/include/configs/tx25.h
index 93dd3c5..2d7479b 100644
--- a/include/configs/tx25.h
+++ b/include/configs/tx25.h
@@ -15,7 +15,6 @@
  */
 #define CONFIG_MX25
 #define CONFIG_MX25_CLK32		32000	/* OSC32K frequency */
-#define CONFIG_SYS_HZ			1000
#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* 256 kB for U-Boot */
diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h
index 0c97ab1..45d33a6 100644
--- a/include/configs/u8500_href.h
+++ b/include/configs/u8500_href.h
@@ -16,7 +16,6 @@
#define CONFIG_SYS_MEMTEST_START	0x00000000
 #define CONFIG_SYS_MEMTEST_END	0x1FFFFFFF
-#define CONFIG_SYS_HZ		1000		/* must be 1000 */
#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index bf04445..1c6e657 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -209,7 +209,6 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
  *------------------------------------------------------------------*/
#define CONFIG_SYS_CLK_FREQ  33000000
-#define CONFIG_SYS_HZ				1000
/*#define CONFIG_SYS_ETH_DEV_FN	     0x7800 */
 /*#define CONFIG_SYS_ETH_IOBASE	     0x00104000 */
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index 501010e..1465fc8 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -259,8 +259,6 @@
#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
diff --git a/include/configs/vct.h b/include/configs/vct.h
index 85a6c11..9983116 100644
--- a/include/configs/vct.h
+++ b/include/configs/vct.h
@@ -28,7 +28,6 @@
 #define CONFIG_MIPS32				/* MIPS 4Kc CPU core	*/
 #define CPU_CLOCK_RATE			324000000 /* Clock for the MIPS core */
 #define CONFIG_SYS_MIPS_TIMER_FREQ	(CPU_CLOCK_RATE / 2)
-#define CONFIG_SYS_HZ			1000
#define CONFIG_SKIP_LOWLEVEL_INIT	/* SDRAM is initialized by the bootstrap code */
diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h
index a4b4732..438524b 100644
--- a/include/configs/ve8313.h
+++ b/include/configs/ve8313.h
@@ -351,7 +351,6 @@
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS	16		/* max number of cmd args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot arg Buffer size */
-#define CONFIG_SYS_HZ		1000		/* 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h
index 75a4500..5b0721c 100644
--- a/include/configs/vexpress_common.h
+++ b/include/configs/vexpress_common.h
@@ -117,7 +117,6 @@
#define CONFIG_SYS_MEMTEST_START	V2M_BASE
 #define CONFIG_SYS_MEMTEST_END		0x20000000
-#define CONFIG_SYS_HZ			1000
#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS	1
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 5a7a066..82db0bf 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -184,7 +184,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x87C00000
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
/*
  * Stack sizes
diff --git a/include/configs/vision2.h b/include/configs/vision2.h
index c24ce9c..222c61a 100644
--- a/include/configs/vision2.h
+++ b/include/configs/vision2.h
@@ -157,7 +157,6 @@
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_HUSH_PARSER
diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h
index e171ae4..4c73134 100644
--- a/include/configs/vl_ma2sc.h
+++ b/include/configs/vl_ma2sc.h
@@ -198,7 +198,6 @@
/* clocks */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock */
#define MHZ180
diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index b450ab5..f32471e 100644
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -397,7 +397,6 @@
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS	16		/* max num of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Argument Buf Size */
-#define CONFIG_SYS_HZ		1000		/* decr freq: 1ms ticks */
/*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 665cfc3..a683241 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -208,7 +208,6 @@
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
#define CONFIG_CMDLINE_EDITING
diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
index 6b7e81f..e47539d 100644
--- a/include/configs/woodburn_common.h
+++ b/include/configs/woodburn_common.h
@@ -152,9 +152,6 @@
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ				1000
-
-
 /*
  * Stack sizes
  *
diff --git a/include/configs/x600.h b/include/configs/x600.h
index 89cd501..39540e3 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -20,7 +20,6 @@
 #include <asm/arch/hardware.h>
/* Timer, HZ specific defines */
-#define CONFIG_SYS_HZ				1000
 #define CONFIG_SYS_HZ_CLOCK			8300000
#define	CONFIG_SYS_TEXT_BASE			0x00800040
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index 28c84db..5aff700 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -116,7 +116,6 @@
#define CONFIG_SYS_LOAD_ADDR		0xa1000000	/* default load address */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CPUSPEED		0x141		/* set core clock to 400/200/100 MHz */
/*
diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h
index f4f42c5..0ccd73a 100644
--- a/include/configs/xilinx-ppc.h
+++ b/include/configs/xilinx-ppc.h
@@ -64,7 +64,6 @@
    				/* default load address       */
 #define CONFIG_SYS_EXTBDINFO		1
    				/* Extended board_into (bd_t) */
-#define CONFIG_SYS_HZ			1000
    				/* decrementer freq: 1 ms ticks */
 #define CONFIG_CMDLINE_EDITING		/* add command line history     */
 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
diff --git a/include/configs/xpedite1000.h b/include/configs/xpedite1000.h
index ea27050..77f1cf2 100644
--- a/include/configs/xpedite1000.h
+++ b/include/configs/xpedite1000.h
@@ -214,7 +214,6 @@ extern void out32(unsigned int, unsigned long);
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 #define CONFIG_CMDLINE_EDITING	1		/* Command-line editing */
 #define CONFIG_BOOTDELAY	3		/* -1 disables auto-boot */
 #define CONFIG_PANIC_HANG			/* do not reset board on panic */
diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h
index 97ce3eb..159f2be 100644
--- a/include/configs/xpedite517x.h
+++ b/include/configs/xpedite517x.h
@@ -561,7 +561,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 #define CONFIG_CMDLINE_EDITING	1		/* Command-line editing */
 #define CONFIG_LOADADDR		0x1000000	/* default location for tftp and bootm */
 #define CONFIG_BOOTDELAY	3		/* -1 disables auto-boot */
diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h
index 372135a..caf5fe1 100644
--- a/include/configs/xpedite520x.h
+++ b/include/configs/xpedite520x.h
@@ -342,7 +342,6 @@
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 #define CONFIG_CMDLINE_EDITING	1		/* add command line history	*/
 #define CONFIG_AUTO_COMPLETE	1		/* add autocompletion support */
 #define CONFIG_LOADADDR		0x1000000	/* default location for tftp and bootm */
diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index 31330ea..267b740 100644
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -416,7 +416,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 #define CONFIG_CMDLINE_EDITING	1		/* add command line history	*/
 #define CONFIG_AUTO_COMPLETE	1		/* add autocompletion support */
 #define CONFIG_LOADADDR		0x1000000	/* default location for tftp and bootm */
diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h
index 340d4be..c03301e 100644
--- a/include/configs/xpedite550x.h
+++ b/include/configs/xpedite550x.h
@@ -401,7 +401,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 #define CONFIG_CMDLINE_EDITING	1		/* add command line history	*/
 #define CONFIG_AUTO_COMPLETE	1		/* add autocompletion support */
 #define CONFIG_LOADADDR		0x1000000	/* default location for tftp and bootm */
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
index 386f9de..b4b8061 100644
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@ -138,8 +138,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
-#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
index 765b849..2e7f145 100644
--- a/include/configs/zmx25.h
+++ b/include/configs/zmx25.h
@@ -12,7 +12,6 @@
#define CONFIG_ARM926EJS			/* arm926ejs CPU core */
 #define CONFIG_MX25
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_TEXT_BASE		0xA0000000
#define CONFIG_MACH_TYPE	MACH_TYPE_ZMX25
diff --git a/include/configs/zynq.h b/include/configs/zynq.h
index b9f381f..4c6e6e8 100644
--- a/include/configs/zynq.h
+++ b/include/configs/zynq.h
@@ -12,7 +12,6 @@
/* CPU clock */
 #define CONFIG_CPU_FREQ_HZ	800000000
-#define CONFIG_SYS_HZ		1000
/* Ram */
 #define CONFIG_NR_DRAM_BANKS		1
-- 
1.8.1.2


    