While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree.
Signed-off-by: Michael Walle michael@walle.cc Reviewed-by: Vladimir Oltean vladimir.oltean@nxp.com --- arch/arm/dts/fsl-ls1028a.dtsi | 120 +++++++++++++++++----------------- 1 file changed, 60 insertions(+), 60 deletions(-)
diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi index 07aeb380ef..349c4bf862 100644 --- a/arch/arm/dts/fsl-ls1028a.dtsi +++ b/arch/arm/dts/fsl-ls1028a.dtsi @@ -174,66 +174,6 @@ }; };
- lpuart0: serial@2260000 { - compatible = "fsl,ls1021a-lpuart"; - reg = <0x0 0x2260000 0x0 0x1000>; - interrupts = <0 232 0x4>; - clocks = <&sysclk>; - clock-names = "ipg"; - little-endian; - status = "disabled"; - }; - - lpuart1: serial@2270000 { - compatible = "fsl,ls1021a-lpuart"; - reg = <0x0 0x2270000 0x0 0x1000>; - interrupts = <0 233 0x4>; - clocks = <&sysclk>; - clock-names = "ipg"; - little-endian; - status = "disabled"; - }; - - lpuart2: serial@2280000 { - compatible = "fsl,ls1021a-lpuart"; - reg = <0x0 0x2280000 0x0 0x1000>; - interrupts = <0 234 0x4>; - clocks = <&sysclk>; - clock-names = "ipg"; - little-endian; - status = "disabled"; - }; - - lpuart3: serial@2290000 { - compatible = "fsl,ls1021a-lpuart"; - reg = <0x0 0x2290000 0x0 0x1000>; - interrupts = <0 235 0x4>; - clocks = <&sysclk>; - clock-names = "ipg"; - little-endian; - status = "disabled"; - }; - - lpuart4: serial@22a0000 { - compatible = "fsl,ls1021a-lpuart"; - reg = <0x0 0x22a0000 0x0 0x1000>; - interrupts = <0 236 0x4>; - clocks = <&sysclk>; - clock-names = "ipg"; - little-endian; - status = "disabled"; - }; - - lpuart5: serial@22b0000 { - compatible = "fsl,ls1021a-lpuart"; - reg = <0x0 0x22b0000 0x0 0x1000>; - interrupts = <0 237 0x4>; - clocks = <&sysclk>; - clock-names = "ipg"; - little-endian; - status = "disabled"; - }; - usb1: usb3@3100000 { compatible = "fsl,layerscape-dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; @@ -484,5 +424,65 @@ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + lpuart0: serial@2260000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2260000 0x0 0x1000>; + interrupts = <0 232 0x4>; + clocks = <&sysclk>; + clock-names = "ipg"; + little-endian; + status = "disabled"; + }; + + lpuart1: serial@2270000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2270000 0x0 0x1000>; + interrupts = <0 233 0x4>; + clocks = <&sysclk>; + clock-names = "ipg"; + little-endian; + status = "disabled"; + }; + + lpuart2: serial@2280000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2280000 0x0 0x1000>; + interrupts = <0 234 0x4>; + clocks = <&sysclk>; + clock-names = "ipg"; + little-endian; + status = "disabled"; + }; + + lpuart3: serial@2290000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2290000 0x0 0x1000>; + interrupts = <0 235 0x4>; + clocks = <&sysclk>; + clock-names = "ipg"; + little-endian; + status = "disabled"; + }; + + lpuart4: serial@22a0000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x22a0000 0x0 0x1000>; + interrupts = <0 236 0x4>; + clocks = <&sysclk>; + clock-names = "ipg"; + little-endian; + status = "disabled"; + }; + + lpuart5: serial@22b0000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x22b0000 0x0 0x1000>; + interrupts = <0 237 0x4>; + clocks = <&sysclk>; + clock-names = "ipg"; + little-endian; + status = "disabled"; + }; }; };