Move it out of lowlevel.S into spintable.S. On layerscape, the secondary CPUs are brought up in main u-boot. This will make it possible to only compile the spin table code for the main u-boot and omit it in SPL.
This saves about 720 bytes in the SPL.
Signed-off-by: Michael Walle michael@walle.cc --- arch/arm/cpu/armv8/fsl-layerscape/Makefile | 2 +- arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 154 +---------------- arch/arm/cpu/armv8/fsl-layerscape/spintable.S | 155 ++++++++++++++++++ 3 files changed, 161 insertions(+), 150 deletions(-) create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/spintable.S
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile index e398aecd12..9ecb372b4e 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile +++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile @@ -6,7 +6,7 @@ obj-y += cpu.o obj-y += lowlevel.o obj-y += soc.o ifndef CONFIG_SPL_BUILD -obj-$(CONFIG_MP) += mp.o +obj-$(CONFIG_MP) += mp.o spintable.o obj-$(CONFIG_OF_LIBFDT) += fdt.o endif obj-$(CONFIG_SPL) += spl.o diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S index d75013eb9c..a519f6ed67 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S +++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S @@ -11,14 +11,16 @@ #include <asm/gic.h> #include <asm/macro.h> #include <asm/arch-fsl-layerscape/soc.h> -#ifdef CONFIG_MP -#include <asm/arch/mp.h> -#endif #ifdef CONFIG_FSL_LSCH3 #include <asm/arch-fsl-layerscape/immap_lsch3.h> #endif #include <asm/u-boot.h>
+ .align 3 + .weak secondary_boot_addr +secondary_boot_addr: + .quad 0 + /* Get GIC offset * For LS1043a rev1.0, GIC base address align with 4k. * For LS1043a rev1.1, if DCFG_GIC400_ALIGN[GIC_ADDR_BIT] @@ -424,149 +426,3 @@ ENTRY(__asm_flush_l3_dcache) ret ENDPROC(__asm_flush_l3_dcache) #endif /* CONFIG_SYS_FSL_HAS_CCN504 */ - -#ifdef CONFIG_MP - .align 3 - .global secondary_boot_addr -secondary_boot_addr: - .quad secondary_boot_func - - /* Keep literals not used by the secondary boot code outside it */ - .ltorg - - /* Using 64 bit alignment since the spin table is accessed as data */ - .align 4 - .global secondary_boot_code - /* Secondary Boot Code starts here */ -secondary_boot_code: - .global __spin_table -__spin_table: - .space CONFIG_MAX_CPUS*SPIN_TABLE_ELEM_SIZE - - .align 2 -ENTRY(secondary_boot_func) - /* - * MPIDR_EL1 Fields: - * MPIDR[1:0] = AFF0_CPUID <- Core ID (0,1) - * MPIDR[7:2] = AFF0_RES - * MPIDR[15:8] = AFF1_CLUSTERID <- Cluster ID (0,1,2,3) - * MPIDR[23:16] = AFF2_CLUSTERID - * MPIDR[24] = MT - * MPIDR[29:25] = RES0 - * MPIDR[30] = U - * MPIDR[31] = ME - * MPIDR[39:32] = AFF3 - * - * Linear Processor ID (LPID) calculation from MPIDR_EL1: - * (We only use AFF0_CPUID and AFF1_CLUSTERID for now - * until AFF2_CLUSTERID and AFF3 have non-zero values) - * - * LPID = MPIDR[15:8] | MPIDR[1:0] - */ - mrs x0, mpidr_el1 - ubfm x1, x0, #8, #15 - ubfm x2, x0, #0, #1 - orr x10, x2, x1, lsl #2 /* x10 has LPID */ - ubfm x9, x0, #0, #15 /* x9 contains MPIDR[15:0] */ - /* - * offset of the spin table element for this core from start of spin - * table (each elem is padded to 64 bytes) - */ - lsl x1, x10, #6 - ldr x0, =__spin_table - /* physical address of this cpus spin table element */ - add x11, x1, x0 - - ldr x0, =__real_cntfrq - ldr x0, [x0] - msr cntfrq_el0, x0 /* set with real frequency */ - str x9, [x11, #16] /* LPID */ - mov x4, #1 - str x4, [x11, #8] /* STATUS */ - dsb sy - -slave_cpu: - wfe - ldr x0, [x11] - cbz x0, slave_cpu -#ifndef CONFIG_ARMV8_SWITCH_TO_EL1 - mrs x1, sctlr_el2 -#else - mrs x1, sctlr_el1 -#endif - tbz x1, #25, cpu_is_le - rev x0, x0 /* BE to LE conversion */ -cpu_is_le: - ldr x5, [x11, #24] - cbz x5, 1f - -#ifdef CONFIG_ARMV8_SWITCH_TO_EL1 - adr x4, secondary_switch_to_el1 - ldr x5, =ES_TO_AARCH64 -#else - ldr x4, [x11] - ldr x5, =ES_TO_AARCH32 -#endif - bl secondary_switch_to_el2 - -1: -#ifdef CONFIG_ARMV8_SWITCH_TO_EL1 - adr x4, secondary_switch_to_el1 -#else - ldr x4, [x11] -#endif - ldr x5, =ES_TO_AARCH64 - bl secondary_switch_to_el2 - -ENDPROC(secondary_boot_func) - -ENTRY(secondary_switch_to_el2) - switch_el x6, 1f, 0f, 0f -0: ret -1: armv8_switch_to_el2_m x4, x5, x6 -ENDPROC(secondary_switch_to_el2) - -ENTRY(secondary_switch_to_el1) - mrs x0, mpidr_el1 - ubfm x1, x0, #8, #15 - ubfm x2, x0, #0, #1 - orr x10, x2, x1, lsl #2 /* x10 has LPID */ - - lsl x1, x10, #6 - ldr x0, =__spin_table - /* physical address of this cpus spin table element */ - add x11, x1, x0 - - ldr x4, [x11] - - ldr x5, [x11, #24] - cbz x5, 2f - - ldr x5, =ES_TO_AARCH32 - bl switch_to_el1 - -2: ldr x5, =ES_TO_AARCH64 - -switch_to_el1: - switch_el x6, 0f, 1f, 0f -0: ret -1: armv8_switch_to_el1_m x4, x5, x6 -ENDPROC(secondary_switch_to_el1) - - /* Ensure that the literals used by the secondary boot code are - * assembled within it (this is required so that we can protect - * this area with a single memreserve region - */ - .ltorg - - /* 64 bit alignment for elements accessed as data */ - .align 4 - .global __real_cntfrq -__real_cntfrq: - .quad COUNTER_FREQUENCY - .globl __secondary_boot_code_size - .type __secondary_boot_code_size, %object - /* Secondary Boot Code ends here */ -__secondary_boot_code_size: - .quad .-secondary_boot_code -#endif diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spintable.S b/arch/arm/cpu/armv8/fsl-layerscape/spintable.S new file mode 100644 index 0000000000..d71ec13eaf --- /dev/null +++ b/arch/arm/cpu/armv8/fsl-layerscape/spintable.S @@ -0,0 +1,155 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2014-2015 Freescale Semiconductor + * Copyright 2019 NXP + */ + +#include <config.h> +#include <linux/linkage.h> +#include <asm/macro.h> +#include <asm/system.h> +#include <asm/arch/mp.h> + + .align 3 + .global secondary_boot_addr +secondary_boot_addr: + .quad secondary_boot_func + + /* Keep literals not used by the secondary boot code outside it */ + .ltorg + + /* Using 64 bit alignment since the spin table is accessed as data */ + .align 4 + .global secondary_boot_code + /* Secondary Boot Code starts here */ +secondary_boot_code: + .global __spin_table +__spin_table: + .space CONFIG_MAX_CPUS*SPIN_TABLE_ELEM_SIZE + + .align 2 +ENTRY(secondary_boot_func) + /* + * MPIDR_EL1 Fields: + * MPIDR[1:0] = AFF0_CPUID <- Core ID (0,1) + * MPIDR[7:2] = AFF0_RES + * MPIDR[15:8] = AFF1_CLUSTERID <- Cluster ID (0,1,2,3) + * MPIDR[23:16] = AFF2_CLUSTERID + * MPIDR[24] = MT + * MPIDR[29:25] = RES0 + * MPIDR[30] = U + * MPIDR[31] = ME + * MPIDR[39:32] = AFF3 + * + * Linear Processor ID (LPID) calculation from MPIDR_EL1: + * (We only use AFF0_CPUID and AFF1_CLUSTERID for now + * until AFF2_CLUSTERID and AFF3 have non-zero values) + * + * LPID = MPIDR[15:8] | MPIDR[1:0] + */ + mrs x0, mpidr_el1 + ubfm x1, x0, #8, #15 + ubfm x2, x0, #0, #1 + orr x10, x2, x1, lsl #2 /* x10 has LPID */ + ubfm x9, x0, #0, #15 /* x9 contains MPIDR[15:0] */ + /* + * offset of the spin table element for this core from start of spin + * table (each elem is padded to 64 bytes) + */ + lsl x1, x10, #6 + ldr x0, =__spin_table + /* physical address of this cpus spin table element */ + add x11, x1, x0 + + ldr x0, =__real_cntfrq + ldr x0, [x0] + msr cntfrq_el0, x0 /* set with real frequency */ + str x9, [x11, #16] /* LPID */ + mov x4, #1 + str x4, [x11, #8] /* STATUS */ + dsb sy + +slave_cpu: + wfe + ldr x0, [x11] + cbz x0, slave_cpu +#ifndef CONFIG_ARMV8_SWITCH_TO_EL1 + mrs x1, sctlr_el2 +#else + mrs x1, sctlr_el1 +#endif + tbz x1, #25, cpu_is_le + rev x0, x0 /* BE to LE conversion */ +cpu_is_le: + ldr x5, [x11, #24] + cbz x5, 1f + +#ifdef CONFIG_ARMV8_SWITCH_TO_EL1 + adr x4, secondary_switch_to_el1 + ldr x5, =ES_TO_AARCH64 +#else + ldr x4, [x11] + ldr x5, =ES_TO_AARCH32 +#endif + bl secondary_switch_to_el2 + +1: +#ifdef CONFIG_ARMV8_SWITCH_TO_EL1 + adr x4, secondary_switch_to_el1 +#else + ldr x4, [x11] +#endif + ldr x5, =ES_TO_AARCH64 + bl secondary_switch_to_el2 + +ENDPROC(secondary_boot_func) + +ENTRY(secondary_switch_to_el2) + switch_el x6, 1f, 0f, 0f +0: ret +1: armv8_switch_to_el2_m x4, x5, x6 +ENDPROC(secondary_switch_to_el2) + +ENTRY(secondary_switch_to_el1) + mrs x0, mpidr_el1 + ubfm x1, x0, #8, #15 + ubfm x2, x0, #0, #1 + orr x10, x2, x1, lsl #2 /* x10 has LPID */ + + lsl x1, x10, #6 + ldr x0, =__spin_table + /* physical address of this cpus spin table element */ + add x11, x1, x0 + + ldr x4, [x11] + + ldr x5, [x11, #24] + cbz x5, 2f + + ldr x5, =ES_TO_AARCH32 + bl switch_to_el1 + +2: ldr x5, =ES_TO_AARCH64 + +switch_to_el1: + switch_el x6, 0f, 1f, 0f +0: ret +1: armv8_switch_to_el1_m x4, x5, x6 +ENDPROC(secondary_switch_to_el1) + + /* Ensure that the literals used by the secondary boot code are + * assembled within it (this is required so that we can protect + * this area with a single memreserve region + */ + .ltorg + + /* 64 bit alignment for elements accessed as data */ + .align 4 + .global __real_cntfrq +__real_cntfrq: + .quad COUNTER_FREQUENCY + .globl __secondary_boot_code_size + .type __secondary_boot_code_size, %object + /* Secondary Boot Code ends here */ +__secondary_boot_code_size: + .quad .-secondary_boot_code