On Fri, Nov 25, 2016 at 9:50 PM, Dr. Philipp Tomsich philipp.tomsich@theobroma-systems.com wrote:
Jagan,
On 25 Nov 2016, at 17:18, Jagan Teki jagan@openedev.com wrote:
On Wed, Nov 16, 2016 at 7:10 AM, Andre Przywara andre.przywara@arm.com wrote:
From: Philipp Tomsich philipp.tomsich@theobroma-systems.com
To send a parametrized command to the PHY over MDIO, we should write the data first, the trigger the execution by the command register write. Fix the access pattern in our MDIO write routine. Apparently this doesn't really matter with the Realtek PHY on the Pine64, but other PHYs (which require more setup) will choke on the wrong order.
Any tested-by this on non-realtek, because I always remember to have CMD with DATA sequence for mdio write for most of the PHY's and ie default sequence though.
We have a KSZ9031 on all our boards… so it was tested against the KSZ9031.
Applied to u-boot-spi/sunxi
thanks!