In message OF16472CC0.C242D283-ON65257155.00539AC9-65257155.00556F56@flextronicssoftware.com you wrote:
I am facing a problem with u-boot update on my OMAP P2 730 target. Are there any build-time configruation options for u-boot build related to the target's NAND or NOR flash. In other words, do we need to specify any
Of course you have to configure U-Boot correctly. This includes NOR and NAND flash like all other hardware features, too.
I have U-boot 1.0.1 burnt to OMAP 730 P2 NOR flash. I am now trying to update u-boot using the method:
- Download u-boot.bin (new version) to target's RAM using serial line
- Copy u-boot.bin to target's flash using u-boot command 'cp.b'
OK.
The u-boot version I am running presently is vendor supplied (version 1.0.1) and I want to update it with the one I have built (version 1.1.1) for my target hardware.
Ummm... Why are you using ancient code like 1.1.1? Please use current code.
I tried downloading the u-boot.bin to the P2 730 RAM over serial line to a specific address and triggered the binary's entry point using command: go 'start address'
That doesn't work. U-Boot expects to be started from the reset entry point.
*********************** FSS-Unclassified *********************** --=_alternative 00556F4E65257155_= Content-Type: text/html; charset="US-ASCII"
And NEVER post HTML on this list!
Best regards,
Wolfgang Denk