20 Jan
2016
20 Jan
'16
11:29 p.m.
On 01/20/2016 02:26 PM, york.sun@nxp.com wrote:
<snip>
Ying,
This patch looks OK but the board doesn't work. I traced the code to the first setting voltage. The VID has 1025mV and current voltage is 1047mV. As soon as the code drops voltage by one step, the board hangs. Please double check if the voltage setting is correct. You can measure it on the board to confirm.
I tested it on top of b57843e68804c2d53d2cff2b8b2238e37b388faa, with two boards. The result is the same.
York