Hi Minkyu Kang,
Thank you for comments.Will correct them
On Wed, Dec 26, 2012 at 5:24 PM, Minkyu Kang mk7.kang@samsung.com wrote:
Dear Rajeshwari Shinde,
On 14/12/12 20:56, Rajeshwari Shinde wrote:
Functions added to get the I2C bus number and reset I2C bus using FDT node.
Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com Acked-by: Simon Glass sjg@chromium.org Acked-by: Heiko Schocher hs@denx.de
Changes in V1: -Rebased on latest u-boot-samsung drivers/i2c/s3c24x0_i2c.c | 83
++++++++++++++++++++++++++++++++++++++++++++-
drivers/i2c/s3c24x0_i2c.h | 8 ++++ include/i2c.h | 26 ++++++++++++++ 3 files changed, 116 insertions(+), 1 deletions(-)
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c index 9bc4c7f..94a093e 100644 --- a/drivers/i2c/s3c24x0_i2c.c +++ b/drivers/i2c/s3c24x0_i2c.c @@ -27,9 +27,11 @@ */
#include <common.h> +#include <fdtdec.h> #ifdef CONFIG_EXYNOS5 #include <asm/arch/clk.h> #include <asm/arch/cpu.h> +#include <asm/arch/pinmux.h> #else #include <asm/arch/s3c24x0_cpu.h> #endif @@ -60,7 +62,14 @@ #define I2C_TIMEOUT 1 /* 1 second */
-static unsigned int g_current_bus; /* Stores Current I2C Bus */ +/*
- For SPL boot some boards need i2c before SDRAM is initialised so
force
- variables to live in SRAM
- */
+static unsigned int g_current_bus __attribute__((section(".data"))); +static struct s3c24x0_i2c_bus i2c_bus[CONFIG_MAX_I2C_NUM]
__attribute__((section(".data")));+static int i2c_busses __attribute__((section(".data")));
#ifndef CONFIG_EXYNOS5 static int GetI2CSDA(void) @@ -507,4 +516,76 @@ int i2c_write(uchar chip, uint addr, int alen,
uchar *buffer, int len)
(i2c, I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer, len) != 0);}
+#ifdef CONFIG_OF_CONTROL +void board_i2c_init(const void *blob) +{
please remove this blank line.
int node_list[CONFIG_MAX_I2C_NUM];int count, i;count = fdtdec_find_aliases_for_id(blob, "i2c",COMPAT_SAMSUNG_S3C2440_I2C, node_list,CONFIG_MAX_I2C_NUM);need blank line here.
for (i = 0; i < count; i++) {struct s3c24x0_i2c_bus *bus;int node = node_list[i];How handle if the value of count is bigger than CONFIG_MAX_I2C_NUM?
if (node <= 0)continue;bus = &i2c_bus[i];bus->regs = (struct s3c24x0_i2c *)fdtdec_get_addr(blob, node, "reg");bus->id = pinmux_decode_periph_id(blob, node);bus->node = node;bus->bus_num = i2c_busses++;exynos_pinmux_config(bus->id, 0);}please remove this blank line.
+}
+static struct s3c24x0_i2c_bus *get_bus(unsigned int bus_idx) +{
if (bus_idx < i2c_busses)return &i2c_bus[bus_idx];need blank line here.
debug("Undefined bus: %d\n", bus_idx);return NULL;+}
+int i2c_get_bus_num_fdt(int node) +{
int i;for (i = 0; i < i2c_busses; i++) {if (node == i2c_bus[i].node)return i;}debug("%s: Can't find any matched I2C bus\n", __func__);return -1;+}
+int i2c_reset_port_fdt(const void *blob, int node) +{
struct s3c24x0_i2c_bus *i2c;Please remove this blank line.
int bus;bus = i2c_get_bus_num_fdt(node);if (bus < 0) {debug("could not get bus for node %d\n", node);return -1;}need blank line here.
i2c = get_bus(bus);if (!i2c) {debug("get_bus() failed for node node %d\n", node);return -1;}i2c_ch_init(i2c->regs, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);return 0;+} +#endif
#endif /* CONFIG_HARD_I2C */ diff --git a/drivers/i2c/s3c24x0_i2c.h b/drivers/i2c/s3c24x0_i2c.h index 2dd4b06..1243bf1 100644 --- a/drivers/i2c/s3c24x0_i2c.h +++ b/drivers/i2c/s3c24x0_i2c.h @@ -30,4 +30,12 @@ struct s3c24x0_i2c { u32 iicds; u32 iiclc; };
+struct s3c24x0_i2c_bus {
int node; /* device tree node */int bus_num; /* i2c bus number */struct s3c24x0_i2c *regs;enum periph_id id;+};
#endif /* _S3C24X0_I2C_H */ diff --git a/include/i2c.h b/include/i2c.h index 16f099d..c60d075 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -262,4 +262,30 @@ extern int get_multi_scl_pin(void); extern int get_multi_sda_pin(void); extern int multi_i2c_init(void); #endif
+/**
- Get FDT values for i2c bus.
- @param blob Device tree blbo
- @return the number of I2C bus
- */
+void board_i2c_init(const void *blob);
+/**
- Find the I2C bus number by given a FDT I2C node.
- @param blob Device tree blbo
- @param node FDT I2C node to find
- @return the number of I2C bus (zero based), or -1 on error
- */
+int i2c_get_bus_num_fdt(int node);
+/**
- Reset the I2C bus represented by the given a FDT I2C node.
- @param blob Device tree blbo
- @param node FDT I2C node to find
- @return 0 if port was reset, -1 if not found
- */
+int i2c_reset_port_fdt(const void *blob, int node); #endif /* _I2C_H_ */
-- Thanks, Minkyu Kang. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot