Hi All,
I am really REALLY stuck - I don't know what kernel image to use with bootm (and where to load it and quite a few other things but getting the right image would be a good start)
Now I _do_ have the go command working (needed a bit of a source tweak). so I can:
boot > setenv loadaddr 40000 boot > loadb boot > Ctrl-\ c C-Kermit>send hello-world.bin C-Kermit>Ctrl-\ c boot > go 40000 ## Starting application at 0x00040000 ... Example expects ABI version 6 Actual U-Boot ABI version 6 Hello World argc = 1 argv[0] = "40000" argv[1] = "<NULL>" Hit any key to exit ...
## Application terminated, rc = 0x0 boot >
So, I cloned the linux kernel git repository and built 2.6.33rc5, ran make xconfig, setup some options and compiled.
I have tried:
linux-2.6/arch/x86/boot/bzImage linux-2.6/arch/x86/boot/vmlinux.bin linux-2.6/arch/x86/boot/compressed/vmlinux
I've tried to load these at 0x0, 0x10000, 0x100000
bootm always results in: Wrong Image Format for bootm command ERROR: can't get kernel image!
go always results in a General Protection fault
README-i386 details loading at 0x0 and running a straight bootm but this always gives me 'Wrong Image Format for bootm command'
I just simply do not understand what I need to do and it is really frustrating that something so simple is so hard to do.
Regards,
Graeme