This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it.
Cc: Jason Liu jason.hui.liu@nxp.com Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/mach-imx/mx5/Kconfig | 6 - board/freescale/mx53evk/Kconfig | 15 -- board/freescale/mx53evk/MAINTAINERS | 6 - board/freescale/mx53evk/Makefile | 7 - board/freescale/mx53evk/imximage.cfg | 97 ---------- board/freescale/mx53evk/mx53evk.c | 270 --------------------------- configs/mx53evk_defconfig | 25 --- include/configs/mx53evk.h | 116 ------------ 8 files changed, 542 deletions(-) delete mode 100644 board/freescale/mx53evk/Kconfig delete mode 100644 board/freescale/mx53evk/MAINTAINERS delete mode 100644 board/freescale/mx53evk/Makefile delete mode 100644 board/freescale/mx53evk/imximage.cfg delete mode 100644 board/freescale/mx53evk/mx53evk.c delete mode 100644 configs/mx53evk_defconfig delete mode 100644 include/configs/mx53evk.h
diff --git a/arch/arm/mach-imx/mx5/Kconfig b/arch/arm/mach-imx/mx5/Kconfig index f7ea471fe717..989b9adf9153 100644 --- a/arch/arm/mach-imx/mx5/Kconfig +++ b/arch/arm/mach-imx/mx5/Kconfig @@ -52,11 +52,6 @@ config TARGET_MX53CX9020 select MX53 imply CMD_DM
-config TARGET_MX53EVK - bool "Support mx53evk" - select BOARD_LATE_INIT - select MX53 - config TARGET_MX53LOCO bool "Support mx53loco" select BOARD_LATE_INIT @@ -83,7 +78,6 @@ config SYS_SOC
source "board/beckhoff/mx53cx9020/Kconfig" source "board/freescale/mx51evk/Kconfig" -source "board/freescale/mx53evk/Kconfig" source "board/freescale/mx53loco/Kconfig" source "board/freescale/mx53smd/Kconfig" source "board/ge/mx53ppd/Kconfig" diff --git a/board/freescale/mx53evk/Kconfig b/board/freescale/mx53evk/Kconfig deleted file mode 100644 index c226c1ca0604..000000000000 --- a/board/freescale/mx53evk/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_MX53EVK - -config SYS_BOARD - default "mx53evk" - -config SYS_VENDOR - default "freescale" - -config SYS_SOC - default "mx5" - -config SYS_CONFIG_NAME - default "mx53evk" - -endif diff --git a/board/freescale/mx53evk/MAINTAINERS b/board/freescale/mx53evk/MAINTAINERS deleted file mode 100644 index d511046cb052..000000000000 --- a/board/freescale/mx53evk/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -MX53EVK BOARD -M: Jason Liu jason.hui.liu@nxp.com -S: Maintained -F: board/freescale/mx53evk/ -F: include/configs/mx53evk.h -F: configs/mx53evk_defconfig diff --git a/board/freescale/mx53evk/Makefile b/board/freescale/mx53evk/Makefile deleted file mode 100644 index cfe4be321e58..000000000000 --- a/board/freescale/mx53evk/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2007, Guennadi Liakhovetski lg@denx.de -# -# (C) Copyright 2010 Freescale Semiconductor, Inc. - -obj-y := mx53evk.o diff --git a/board/freescale/mx53evk/imximage.cfg b/board/freescale/mx53evk/imximage.cfg deleted file mode 100644 index ef103d6da7de..000000000000 --- a/board/freescale/mx53evk/imximage.cfg +++ /dev/null @@ -1,97 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C Copyright 2009 - * Stefano Babic DENX Software Engineering sbabic@denx.de. - * - * Refer doc/imx/mkimage/imximage.txt for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ - -/* image version */ -IMAGE_VERSION 2 - -/* - * Boot Device : one of - * spi, sd (the board has no nand neither onenand) - */ -BOOT_FROM sd - -/* - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ -/* Setting IOMUXC */ -DATA 4 0x53fa8554 0x00200000 -DATA 4 0x53fa8560 0x00200000 -DATA 4 0x53fa8594 0x00200000 -DATA 4 0x53fa8584 0x00200000 -DATA 4 0x53fa8558 0x00200040 -DATA 4 0x53fa8568 0x00200040 -DATA 4 0x53fa8590 0x00200040 -DATA 4 0x53fa857c 0x00200040 -DATA 4 0x53fa8564 0x00200040 -DATA 4 0x53fa8580 0x00200040 -DATA 4 0x53fa8570 0x00200000 -DATA 4 0x53fa8578 0x00200000 -DATA 4 0x53fa872c 0x00200000 -DATA 4 0x53fa8728 0x00200000 -DATA 4 0x53fa871c 0x00200000 -DATA 4 0x53fa8718 0x00200000 -DATA 4 0x53fa8574 0x00280000 -DATA 4 0x53fa8588 0x00280000 -DATA 4 0x53fa86f0 0x00280000 -DATA 4 0x53fa8720 0x00280000 -DATA 4 0x53fa86fc 0x00000000 -DATA 4 0x53fa86f4 0x00000200 -DATA 4 0x53fa8714 0x00000000 -DATA 4 0x53fa8724 0x06000000 -DATA 4 0x63fd9088 0x34333936 -DATA 4 0x63fd9090 0x49434942 -DATA 4 0x63fd90F8 0x00000800 -DATA 4 0x63fd907c 0x01350138 -DATA 4 0x63fd9080 0x01380139 -DATA 4 0x63fd9018 0x00001710 -DATA 4 0x63fd9000 0xc4110000 -DATA 4 0x63fd900C 0x4d5122d2 -DATA 4 0x63fd9010 0x92d18a22 -DATA 4 0x63fd9014 0x00c70092 -DATA 4 0x63fd902c 0x000026d2 -DATA 4 0x63fd9030 0x009f000e -DATA 4 0x63fd9008 0x12272000 -DATA 4 0x63fd9004 0x00030012 -DATA 4 0x63fd901c 0x04008010 -DATA 4 0x63fd901c 0x00008032 -DATA 4 0x63fd901c 0x00008033 -DATA 4 0x63fd901c 0x00008031 -DATA 4 0x63fd901c 0x0b5280b0 -DATA 4 0x63fd901c 0x04008010 -DATA 4 0x63fd901c 0x00008020 -DATA 4 0x63fd901c 0x00008020 -DATA 4 0x63fd901c 0x0a528030 -DATA 4 0x63fd901c 0x03c68031 -DATA 4 0x63fd901c 0x00448031 -DATA 4 0x63fd901c 0x04008018 -DATA 4 0x63fd901c 0x0000803a -DATA 4 0x63fd901c 0x0000803b -DATA 4 0x63fd901c 0x00008039 -DATA 4 0x63fd901c 0x0b528138 -DATA 4 0x63fd901c 0x04008018 -DATA 4 0x63fd901c 0x00008028 -DATA 4 0x63fd901c 0x00008028 -DATA 4 0x63fd901c 0x0a528038 -DATA 4 0x63fd901c 0x03c68039 -DATA 4 0x63fd901c 0x00448039 -DATA 4 0x63fd9020 0x00005800 -DATA 4 0x63fd9058 0x00033335 -DATA 4 0x63fd901c 0x00000000 -DATA 4 0x63fd9040 0x05380003 -DATA 4 0x53fa8004 0x00194005 diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c deleted file mode 100644 index b006638e2c12..000000000000 --- a/board/freescale/mx53evk/mx53evk.c +++ /dev/null @@ -1,270 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2010 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <init.h> -#include <asm/global_data.h> -#include <asm/io.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/crm_regs.h> -#include <asm/arch/clock.h> -#include <asm/arch/iomux-mx53.h> -#include <linux/errno.h> -#include <asm/mach-imx/boot_mode.h> -#include <netdev.h> -#include <i2c.h> -#include <mmc.h> -#include <fsl_esdhc_imx.h> -#include <power/pmic.h> -#include <fsl_pmic.h> -#include <asm/gpio.h> -#include <mc13892.h> - -DECLARE_GLOBAL_DATA_PTR; - -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_1_SIZE); - return 0; -} - -#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) - -static void setup_iomux_uart(void) -{ - static const iomux_v3_cfg_t uart_pads[] = { - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, UART_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, UART_PAD_CTRL), - }; - - imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); -} - -#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ - PAD_CTL_HYS | PAD_CTL_ODE) - -static void setup_i2c(unsigned int port_number) -{ - static const iomux_v3_cfg_t i2c1_pads[] = { - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__I2C1_SDA, I2C_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__I2C1_SCL, I2C_PAD_CTRL), - }; - - static const iomux_v3_cfg_t i2c2_pads[] = { - NEW_PAD_CTRL(MX53_PAD_KEY_ROW3__I2C2_SDA, I2C_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_KEY_COL3__I2C2_SCL, I2C_PAD_CTRL), - }; - - switch (port_number) { - case 0: - imx_iomux_v3_setup_multiple_pads(i2c1_pads, - ARRAY_SIZE(i2c1_pads)); - break; - case 1: - imx_iomux_v3_setup_multiple_pads(i2c2_pads, - ARRAY_SIZE(i2c2_pads)); - break; - default: - printf("Warning: Wrong I2C port number\n"); - break; - } -} - -void power_init(void) -{ - unsigned int val; - struct pmic *p; - int ret; - - ret = pmic_init(I2C_0); - if (ret) - return; - - p = pmic_get("FSL_PMIC"); - if (!p) - return; - - /* Set VDDA to 1.25V */ - pmic_reg_read(p, REG_SW_2, &val); - val &= ~SWX_OUT_MASK; - val |= SWX_OUT_1_25; - pmic_reg_write(p, REG_SW_2, val); - - /* - * Need increase VCC and VDDA to 1.3V - * according to MX53 IC TO2 datasheet. - */ - if (is_soc_rev(CHIP_REV_2_0) == 0) { - /* Set VCC to 1.3V for TO2 */ - pmic_reg_read(p, REG_SW_1, &val); - val &= ~SWX_OUT_MASK; - val |= SWX_OUT_1_30; - pmic_reg_write(p, REG_SW_1, val); - - /* Set VDDA to 1.3V for TO2 */ - pmic_reg_read(p, REG_SW_2, &val); - val &= ~SWX_OUT_MASK; - val |= SWX_OUT_1_30; - pmic_reg_write(p, REG_SW_2, val); - } -} - -static void setup_iomux_fec(void) -{ - static const iomux_v3_cfg_t fec_pads[] = { - NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS | - PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE), - NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV, - PAD_CTL_HYS | PAD_CTL_PKE), - }; - - imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); -} - -#ifdef CONFIG_FSL_ESDHC_IMX -struct fsl_esdhc_cfg esdhc_cfg[2] = { - {MMC_SDHC1_BASE_ADDR}, - {MMC_SDHC3_BASE_ADDR}, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret; - - imx_iomux_v3_setup_pad(MX53_PAD_EIM_DA11__GPIO3_11); - gpio_direction_input(IMX_GPIO_NR(3, 11)); - imx_iomux_v3_setup_pad(MX53_PAD_EIM_DA13__GPIO3_13); - gpio_direction_input(IMX_GPIO_NR(3, 13)); - - if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) - ret = !gpio_get_value(IMX_GPIO_NR(3, 13)); - else - ret = !gpio_get_value(IMX_GPIO_NR(3, 11)); - - return ret; -} - -#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUS_100K_UP) -#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \ - PAD_CTL_DSE_HIGH) - -int board_mmc_init(struct bd_info *bis) -{ - static const iomux_v3_cfg_t sd1_pads[] = { - NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL), - MX53_PAD_EIM_DA13__GPIO3_13, - }; - - static const iomux_v3_cfg_t sd2_pads[] = { - NEW_PAD_CTRL(MX53_PAD_PATA_RESET_B__ESDHC3_CMD, - SD_CMD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_PATA_IORDY__ESDHC3_CLK, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_PATA_DATA8__ESDHC3_DAT0, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_PATA_DATA9__ESDHC3_DAT1, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_PATA_DATA10__ESDHC3_DAT2, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_PATA_DATA11__ESDHC3_DAT3, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__ESDHC3_DAT4, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__ESDHC3_DAT5, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__ESDHC3_DAT6, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__ESDHC3_DAT7, SD_PAD_CTRL), - MX53_PAD_EIM_DA11__GPIO3_11, - }; - - u32 index; - int ret; - - esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - - for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { - switch (index) { - case 0: - imx_iomux_v3_setup_multiple_pads(sd1_pads, - ARRAY_SIZE(sd1_pads)); - break; - case 1: - imx_iomux_v3_setup_multiple_pads(sd2_pads, - ARRAY_SIZE(sd2_pads)); - break; - default: - printf("Warning: you configured more ESDHC controller" - "(%d) as supported by the board(2)\n", - CONFIG_SYS_FSL_ESDHC_NUM); - return -EINVAL; - } - ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]); - if (ret) - return ret; - } - - return 0; -} -#endif - -int board_early_init_f(void) -{ - setup_iomux_uart(); - setup_iomux_fec(); - - return 0; -} - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - return 0; -} - -#ifdef CONFIG_CMD_BMODE -static const struct boot_mode board_boot_modes[] = { - /* 4 bit bus width */ - {"mmc0", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x12)}, - {"mmc1", MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)}, - {NULL, 0}, -}; -#endif - -int board_late_init(void) -{ - setup_i2c(1); - power_init(); - -#ifdef CONFIG_CMD_BMODE - add_board_boot_modes(board_boot_modes); -#endif - return 0; -} - -int checkboard(void) -{ - puts("Board: MX53EVK\n"); - - return 0; -} diff --git a/configs/mx53evk_defconfig b/configs/mx53evk_defconfig deleted file mode 100644 index 680f342b1199..000000000000 --- a/configs/mx53evk_defconfig +++ /dev/null @@ -1,25 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX5=y -CONFIG_SYS_TEXT_BASE=0x77800000 -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x60000 -CONFIG_TARGET_MX53EVK=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx53evk/imximage.cfg" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y -CONFIG_CMD_FAT=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_FSL_ESDHC_IMX=y -CONFIG_MTD=y -CONFIG_MII=y -CONFIG_MXC_UART=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h deleted file mode 100644 index 91a56dda2892..000000000000 --- a/include/configs/mx53evk.h +++ /dev/null @@ -1,116 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. - * - * Configuration settings for the MX53-EVK Freescale board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MACH_TYPE MACH_TYPE_MX53_EVK - -#include <asm/arch/imx-regs.h> - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_REVISION_TAG - -#define CONFIG_SYS_FSL_CLK - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) - -#define CONFIG_MXC_UART_BASE UART1_BASE - -/* I2C Configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ - -/* PMIC Configs */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_FSL -#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 8 -#define CONFIG_POWER_FSL_MC13892 -#define CONFIG_RTC_MC13XXX - -/* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_ESDHC_NUM 2 - -/* Eth Configs */ - -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE FEC_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0x1F - -/* Command definition */ - -#define CONFIG_ETHPRIME "FEC0" - -#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "script=boot.scr\0" \ - "uimage=uImage\0" \ - "mmcdev=0\0" \ - "mmcpart=2\0" \ - "mmcroot=/dev/mmcblk0p3 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "loadbootscript=" \ - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm\0" \ - "netargs=setenv bootargs console=ttymxc0,${baudrate} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "dhcp ${uimage}; bootm\0" \ - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - -#define CONFIG_ARP_TIMEOUT 200UL - -/* Miscellaneous configurable options */ - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -/* Physical Memory Map */ -#define PHYS_SDRAM_1 CSD0_BASE_ADDR -#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) - -#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) -#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) -#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* environment organization */ - -#endif /* __CONFIG_H */