Explicitly list the targets supported in each section of the instructions from the x86 README.
Signed-off-by: Igor Stoppa igor.stoppa@intel.com --- doc/README.x86 | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/doc/README.x86 b/doc/README.x86 index af2459c..1105afe 100644 --- a/doc/README.x86 +++ b/doc/README.x86 @@ -19,14 +19,15 @@ work with minimal adjustments on other x86 boards since coreboot deals with most of the low-level details.
U-Boot also supports booting directly from x86 reset vector without coreboot, -aka raw support or bare support. Currently Link, QEMU x86 targets and all -Intel boards support running U-Boot 'bare metal'. +aka raw support or bare support. U-Boot becomes a replacement for the BIOS. +Currently Link, QEMU x86 targets and all Intel boards support running U-Boot +'bare metal'.
As for loading an OS, U-Boot supports directly booting a 32-bit or 64-bit Linux kernel as part of a FIT image. It also supports a compressed zImage.
-Build Instructions ------------------- +Build Instructions for U-Boot as coreboot payload +------------------------------------------------- Building U-Boot as a coreboot payload is just like building U-Boot for targets on other architectures, like below:
@@ -48,6 +49,8 @@ Change the 'Board configuration file' and 'Board Device Tree Source (dts) file' to point to a new board. You can also change the Cache-As-RAM (CAR) related settings here if the default values do not fit your new board.
+Build Instructions for U-Boot as BIOS replacement (raw/bare mode) +----------------------------------------------------------------- Building a ROM version of U-Boot (hereafter referred to as u-boot.rom) is a little bit tricky, as generally it requires several binary blobs which are not shipped in the U-Boot source tree. Due to this reason, the u-boot.rom build is @@ -87,7 +90,7 @@ Now you can build U-Boot and obtain u-boot.rom: $ make chromebook_link_defconfig $ make all
-Intel Crown Bay specific instructions: +Intel Crown Bay specific instructions (raw mode):
U-Boot support of Intel Crown Bay board [4] relies on a binary blob called Firmware Support Package [5] to perform all the necessary initialization steps @@ -122,7 +125,7 @@ Now you can build U-Boot and obtain u-boot.rom $ make crownbay_defconfig $ make all
-Intel Minnowboard Max instructions: +Intel Minnowboard Max instructions (raw mode):
This uses as FSP as with Crown Bay, except it is for the Atom E3800 series. Download this and get the .fd file (BAYTRAIL_FSP_GOLD_003_16-SEP-2014.fd at @@ -189,7 +192,7 @@ Offset Description Controlling config Overall ROM image size is controlled by CONFIG_ROM_SIZE.
-Intel Galileo instructions: +Intel Galileo instructions (raw mode):
Only one binary blob is needed for Remote Management Unit (RMU) within Intel Quark SoC. Not like FSP, U-Boot does not call into the binary. The binary is