U-Boot TPL 2019.10-rc3-00361-ga9fa70b7b7-dirty (Sep 21 2019 - 07:45:04) LPDDR3 Trying to boot from BOOTROM Returning to boot ROM... U-Boot SPL 2019.10-rc3-00361-ga9fa70b7b7-dirty (Sep 21 2019 - 07:45:04 -0400) Trying to boot from MMC2 Card did not respond to voltage select! spl: mmc init failed with error: -95 Trying to boot from MMC1 NOTICE: BL31: v2.1(release):v2.1-678-g2fc6ffc4-dirty NOTICE: BL31: Built : 12:10:07, Sep 12 2019 ERROR: over or zero region, nr=4187432, max=10 NOTICE: BL31:Rockchip release version: v1.2 U-Boot 2019.10-rc3-00361-ga9fa70b7b7-dirty (Sep 21 2019 - 07:46:10 -0400) Model: Pine64 Rock64 DRAM: 4 GiB MMC: rksdmmc@ff500000: 1, rksdmmc@ff520000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@ff130000 Out: serial@ff130000 Err: serial@ff130000 Model: Pine64 Rock64 Net: Warning: ethernet@ff540000 (eth0) using random MAC address - 92:21:88:52:60:47 eth0: ethernet@ff540000 Hit any key to stop autoboot: 2  1  0 Card did not respond to voltage select! switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... 53513 bytes read in 16 ms (3.2 MiB/s) Found EFI removable media binary efi/boot/bootaa64.efi libfdt fdt_check_header(): FDT_ERR_BADMAGIC Scanning disk rksdmmc@ff500000.blk... Card did not respond to voltage select! Scanning disk rksdmmc@ff520000.blk... Disk rksdmmc@ff520000.blk not ready Found 3 disks BootOrder not defined EFI boot manager: Cannot load any image 205136 bytes read in 35 ms (5.6 MiB/s) libfdt fdt_check_header(): FDT_ERR_BADMAGIC U-Boot TPL 2019.10-rc3-00361-ga9fa70b7b7-dirty (Sep 21 2019 - 07:45:04) LPDDR3 Trying to boot from BOOTROM Returning to boot ROM... U-Boot SPL 2019.10-rc3-00361-ga9fa70b7b7-dirty (Sep 21 2019 - 07:45:04 -0400) Trying to boot from MMC2 Card did not respond to voltage select! spl: mmc init failed with error: -95 Trying to boot from MMC1 NOTICE: BL31: v2.1(release):v2.1-678-g2fc6ffc4-dirty NOTICE: BL31: Built : 12:10:07, Sep 12 2019 ERROR: over or zero region, nr=4187432, max=10 NOTICE: BL31:Rockchip release version: v1.2 U-Boot 2019.10-rc3-00361-ga9fa70b7b7-dirty (Sep 21 2019 - 07:46:10 -0400) Model: Pine64 Rock64 DRAM: 4 GiB MMC: rksdmmc@ff500000: 1, rksdmmc@ff520000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@ff130000 Out: serial@ff130000 Err: serial@ff130000 Model: Pine64 Rock64 Net: Warning: ethernet@ff540000 (eth0) using random MAC address - fe:f0:6b:1f:55:ce eth0: ethernet@ff540000 Hit any key to stop autoboot: 2  1  0 Card did not respond to voltage select! switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... 53513 bytes read in 16 ms (3.2 MiB/s) Found EFI removable media binary efi/boot/bootaa64.efi Scanning disk rksdmmc@ff500000.blk... Card did not respond to voltage select! Scanning disk rksdmmc@ff520000.blk... Disk rksdmmc@ff520000.blk not ready Found 3 disks BootOrder not defined EFI boot manager: Cannot load any image 205136 bytes read in 35 ms (5.6 MiB/s) "Synchronous Abort" handler, esr 0x96000044 elr: fffffffffd1ad760 lr : fffffffffd1ac030 (reloc) elr: 00000000fbeeb760 lr : 00000000fbeea030 x0 : 00000000fcf679a0 x1 : 00000000fef3e628 x2 : 0000000000000000 x3 : 00000000fbf17408 x4 : 0000000000000000 x5 : 0000000000000018 x6 : 00000000fcf679a0 x7 : 00000000fefa8a00 x8 : 000000000000fbee x9 : 0000000000000008 x10: 0000000000000001 x11: 00000000fcf29acc x12: 00000000000000c0 x13: 00000000fcf29a8c x14: 00000000080ef000 x15: 0000000000000002 x16: 00000000fef41c54 x17: 0000000000000000 x18: 0000000000000000 x19: 00000000fef3e628 x20: 00000000fcf29e30 x21: 0000000000000000 x22: 00000000fefa8a00 x23: 00000000fef3e628 x24: 00000000fefec000 x25: 00000000fefec000 x26: 0000000000000000 x27: 0000000000000000 x28: 00000000fcf5d250 x29: 00000000fcf29d80 UEFI image [0x00000000fbee9000:0x00000000fbf17fff] pc=0x2760 '/efi\boot\bootaa64.efi' Resetting CPU ... resetting ... U-Boot TPL 2019.10-rc3-00361-ga9fa70b7b7-dirty (Sep 21 2019 - 07:45:04) LPDDR3 Trying to boot from BOOTROM Returning to boot ROM... U-Boot SPL 2019.10-rc3-00361-ga9fa70b7b7-dirty (Sep 21 2019 - 07:45:04 -0400) Trying to boot from MMC2 Card did not respond to voltage select! spl: mmc init failed with error: -95 Trying to boot from MMC1 NOTICE: BL31: v2.1(release):v2.1-678-g2fc6ffc4-dirty NOTICE: BL31: Built : 12:10:07, Sep 12 2019 ERROR: over or zero region, nr=4187432, max=10 NOTICE: BL31:Rockchip release version: v1.2 U-Boot 2019.10-rc3-00361-ga9fa70b7b7-dirty (Sep 21 2019 - 07:46:10 -0400) Model: Pine64 Rock64 DRAM: 4 GiB MMC: rksdmmc@ff500000: 1, rksdmmc@ff520000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@ff130000 Out: serial@ff130000 Err: serial@ff130000 Model: Pine64 Rock64 Net: Warning: ethernet@ff540000 (eth0) using random MAC address - fe:83:b7:02:40:87 eth0: ethernet@ff540000 Hit any key to stop autoboot: 2  1  0 Card did not respond to voltage select! switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... 53513 bytes read in 19 ms (2.7 MiB/s) Found EFI removable media binary efi/boot/bootaa64.efi Scanning disk rksdmmc@ff500000.blk... Card did not respond to voltage select! Scanning disk rksdmmc@ff520000.blk... Disk rksdmmc@ff520000.blk not ready Found 3 disks BootOrder not defined EFI boot manager: Cannot load any image 205136 bytes read in 40 ms (4.9 MiB/s) ## Application terminated, r = 1 EFI LOAD FAILED: continuing... starting USB... Bus usb@ff5c0000: USB EHCI 1.00 Bus usb@ff5d0000: USB OHCI 1.0 Bus usb@ff580000: Bus usb@ff600000: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@ff5c0000 for devices... 1 USB Device(s) found scanning bus usb@ff5d0000 for devices... 1 USB Device(s) found scanning bus usb@ff580000 for devices... 1 USB Device(s) found scanning bus usb@ff600000 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Device 0: unknown device ethernet@ff540000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Could not initialize PHY ethernet@ff540000 missing environment variable: pxeuuid missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000000 ethernet@ff540000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Could not initialize PHY ethernet@ff540000 missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000000 ethernet@ff540000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Could not initialize PHY ethernet@ff540000 missing environment variable: bootfile Retrieving file: pxelinux.cfg/000000 ethernet@ff540000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Could not initialize PHY ethernet@ff540000 missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000 ethernet@ff540000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Could not initialize PHY ethernet@ff540000 missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000 ethernet@ff540000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Could not initialize PHY ethernet@ff540000 missing environment variable: bootfile Retrieving file: pxelinux.cfg/000 ethernet@ff540000 Waiting for PHY auto negotiation to complete..