[PATCH v4 0/5] Add support for booting EFI FIT images

24 Dec 2019


      Currently the only way to run an EFI binary like GRUB2 is via the
'bootefi' command, which cannot be used in a verified boot scenario.
The obvious solution to this limitation is to add support for
booting FIT images containing those EFI binaries.
The implementation relies on a new image type - IH_OS_EFI - which
can be created by using 'os = "efi"' inside an ITS file:
/ {
    #address-cells = <1>;
images {
        efi-grub {
            description = "GRUB EFI";
            data = /incbin/("bootarm.efi");
            type = "kernel_noload";
            arch = "arm";
            os = "efi";
            compression = "none";
            load = <0x0>;
            entry = <0x0>;
            hash-1 {
                algo = "sha256";
            };
        };
    };
configurations {
        default = "config-grub";
        config-grub {
            kernel = "efi-grub";
            signature-1 {
                algo = "sha256,rsa2048";
                sign-images = "kernel";
            };
        };
    };
};
The bootm command has been extended to handle the IH_OS_EFI images.
To enable this feature, a new configuration option has been added:
BOOTM_EFI
I tested the solution using the 'qemu_arm' board:
=> load scsi 0:1 ${kernel_addr_r} efi-image.fit
=> bootm ${kernel_addr_r}#config-grub
Changes in v4:
* Extend the python test to also run on real hardware, currently
  tested on qemu_arm
Changes in v3:
* Rebase patches on Heinrich Schuchardt's patch series v3:
   efi_loader: prepare for FIT images
   https://lists.denx.de/pipermail/u-boot/2019-December/393677.html
   This fixes implicitly the sandbox issue 'phys_to_virt: Cannot map
   sandbox address' since efi_install_fdt() is now expecting a pointer
   to addressable memory instead of a physical address.
* Get rid of 'EFI/BOOT/' prefix used in ITS samples
* Add a python test to verify the implementation in sandbox environment
Changes in v2:
* Rebase patches on Heinrich Schuchardt's patch series:
   efi_loader: prepare for FIT images
   https://lists.denx.de/pipermail/u-boot/2019-December/393192.html
* Add sample configuration: doc/uImage.FIT/uefi.its
* Update uefi documentation: doc/uefi/uefi.rst
Cristian Ciocaltea (5):
  image: Add IH_OS_EFI for EFI chain-load boot
  bootm: Add a bootm command for type IH_OS_EFI
  doc: Add sample uefi.its image description file
  doc: uefi.rst: Document launching UEFI binaries from FIT images
  test/py: Create a test for launching UEFI binaries from FIT images
cmd/Kconfig                   |   7 +
 common/bootm_os.c             |  56 +++++
 common/image-fit.c            |   3 +-
 common/image.c                |   1 +
 doc/uImage.FIT/uefi.its       |  67 +++++
 doc/uefi/uefi.rst             |  34 +++
 include/image.h               |   1 +
 test/py/tests/test_efi_fit.py | 459 ++++++++++++++++++++++++++++++++++
 8 files changed, 627 insertions(+), 1 deletion(-)
 create mode 100644 doc/uImage.FIT/uefi.its
 create mode 100644 test/py/tests/test_efi_fit.py
-- 
2.17.1