At present 64-bit sunxi boards use the Makefile to create a FIT, using USE_SPL_FIT_GENERATOR. This is deprecated.
Update sunxi to use binman instead.
Signed-off-by: Simon Glass sjg@chromium.org ---
(no changes since v2)
Changes in v2: - Add a 'fit-fdt-list' property - Fix 'board' typo in commit message
Kconfig | 3 +- Makefile | 18 ++-------- arch/arm/dts/sunxi-u-boot.dtsi | 61 +++++++++++++++++++++++++++++++++- 3 files changed, 63 insertions(+), 19 deletions(-)
diff --git a/Kconfig b/Kconfig index 883e3f71d01..837b2f517ae 100644 --- a/Kconfig +++ b/Kconfig @@ -659,12 +659,11 @@ config SPL_FIT_SOURCE
config USE_SPL_FIT_GENERATOR bool "Use a script to generate the .its script" - default y if SPL_FIT + default y if SPL_FIT && !ARCH_SUNXI
config SPL_FIT_GENERATOR string ".its file generator script for U-Boot FIT image" depends on USE_SPL_FIT_GENERATOR - default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP default "arch/arm/mach-zynqmp/mkimage_fit_atf.sh" if SPL_LOAD_FIT && ARCH_ZYNQMP default "arch/riscv/lib/mkimage_fit_opensbi.sh" if SPL_LOAD_FIT && RISCV diff --git a/Makefile b/Makefile index 5b4e60496d6..65024c74089 100644 --- a/Makefile +++ b/Makefile @@ -923,11 +923,6 @@ INPUTS-$(CONFIG_REMAKE_ELF) += u-boot.elf INPUTS-$(CONFIG_EFI_APP) += u-boot-app.efi INPUTS-$(CONFIG_EFI_STUB) += u-boot-payload.efi
-# Build a combined spl + u-boot image for sunxi -ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_ARM64)$(CONFIG_SPL),yyy) -INPUTS-y += u-boot-sunxi-with-spl.bin -endif - # Generate this input file for binman ifeq ($(CONFIG_SPL),) INPUTS-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin @@ -1024,13 +1019,9 @@ PHONY += inputs inputs: $(INPUTS-y)
all: .binman_stamp inputs -# Hack for sunxi which doesn't have a proper binman definition for -# 64-bit boards -ifneq ($(CONFIG_ARCH_SUNXI)$(CONFIG_ARM64),yy) ifeq ($(CONFIG_BINMAN),y) $(call if_changed,binman) endif -endif
# Timestamp file to make sure that binman always runs .binman_stamp: FORCE @@ -1336,6 +1327,8 @@ cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \ $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \ build -u -d u-boot.dtb -O . -m --allow-missing \ -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \ + -I arch/$(ARCH)/dts -a of-list=$(CONFIG_OF_LIST) \ + -a atf-bl31-path=${BL31} \ $(BINMAN_$(@F))
OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex @@ -1625,13 +1618,6 @@ u-boot-x86-reset16.bin: u-boot FORCE
endif # CONFIG_X86
-ifneq ($(CONFIG_ARCH_SUNXI),) -ifeq ($(CONFIG_ARM64),y) -u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE - $(call if_changed,cat) -endif -endif - OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI) u-boot-app.efi: u-boot FORCE $(call if_changed,zobjcopy) diff --git a/arch/arm/dts/sunxi-u-boot.dtsi b/arch/arm/dts/sunxi-u-boot.dtsi index fdd4c80aa46..1d1c3691099 100644 --- a/arch/arm/dts/sunxi-u-boot.dtsi +++ b/arch/arm/dts/sunxi-u-boot.dtsi @@ -5,14 +5,73 @@ mmc1 = &mmc2; };
- binman { + binman: binman { + multiple-images; + }; +}; + +&binman { + u-boot-sunxi-with-spl { filename = "u-boot-sunxi-with-spl.bin"; pad-byte = <0xff>; blob { filename = "spl/sunxi-spl.bin"; }; +#ifdef CONFIG_ARM64 + fit { + description = "Configuration to load ATF before U-Boot"; + #address-cells = <1>; + fit,fdt-list = "of-list"; + + images { + uboot { + description = "U-Boot (64-bit)"; + type = "standalone"; + arch = "arm64"; + compression = "none"; + load = <0x4a000000>; + + u-boot-nodtb { + }; + }; + atf { + description = "ARM Trusted Firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; +/* TODO: Do this with an overwrite in this board's dtb? */ +#ifdef CONFIG_MACH_SUN50I_H6 + load = <0x104000>; + entry = <0x104000>; +#else + load = <0x44000>; + entry = <0x44000>; +#endif + atf-bl31 { + }; + }; + + @fdt-SEQ { + description = "NAME"; + type = "flat_dt"; + compression = "none"; + }; + }; + + configurations { + default = "config-1"; + @config-SEQ { + description = "NAME"; + firmware = "uboot"; + loadables = "atf"; + fdt = "fdt-SEQ"; + }; + }; + }; +#else u-boot-img { offset = <CONFIG_SPL_PAD_TO>; }; +#endif }; };